Nxg NX-HDMIS-1X8 User manual
NX-HDMIS-1X8 HDMI Splitter
DEAR CUSTOMER
Thank you for purchasing this NXG Technology product. For optimum performance and safety,
please read these instructions carefully before connecting and operating this product. Please
keep this manual in a safe place for future reference.
FEATURES
•HDMI TM (V.1.4 with 3D & 4KX2K)
•Distribute 1 HDMI source to as many as 8 displays
•Supports HDMI version 1.4 3D formats
•Supports HD Resolutions: 4KX2K @ 24 HZ, 1080p @ 60HZ, 720p/1080i @ 120Hz
•Supports Digital Audio Formats: Dolby TrueHD, and DTS-HD Master Audio.
•Operates on DC 5V Power.
NOTICE
NXG Technology reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
TABLE OF CONTENTS
Introduction
Specifications
Package Contents
Panel Descriptions
Connecting
Typical Application
Product Service
Warranty
INTRODUCTION
This NXG Technology 1.4v 1X8 splitter supports all the mandatory and several optional 3D formats
described in HDMI 1.4 specifications. The NX-HDMIS-1X8 maintains HDTV resolutions up to
1080P and 4KX2K.
4 1
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
WARRANTY
NXG products are designed to the highest possible value and performance standards. Our
confidence in their quality is such that NXG Technology offers customers this transferable
limited warranty:
NXG Products Two-Year Limited Warranty
If the NXG products prove to be defective in workmanship or materials within two years from
the date of the original customer’s purchase, we will, at our option, repair or replace the defec-
tive products.
DISCLAIMER
THE WARRANTY STATED HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER LIA-
BILITIES AND OBLIGATIONS OF NXG TECHNOLOGY, ALL OF WHICH ARE EXPRESSLY DISCLAIMED.
NXG TECHNOLOGY HAS NOT MADE AND DOES NOT HEREBY MAKE ANY OTHER REPRESENTATION,
WARRANTY OR COVENANT WITH RESPECT TO THE CONDITION, QUALITY,DURABILITY,DESIGN,
OPERATION, CAPACITY, FITNESS FOR USE OR SUITABILITY OF THE NXG PRODUCT.
Exclusion of Certain Damages
NXG Technology’s liability for any defective product is limited to repair or replacement of prod-
uct at our option. NXG Technology shall not be liable for incidental or consequential damages
of any kind or character because of product defects. Some states do not allow limitations on
how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations and exclusions may not apply.
This Warranty Does Not Cover:
•Damage caused by abuse, accident, misuse, negligence, or improper operation.
•Any product whose serial number has been altered, defaced, or removed.
•Products that have been altered or modified.
•Normal wear and maintenance.
•Damages caused by shipping. (All claims for shipping damage must be made with the carrier.)
Warranty Service
Warranty service must be performed by an authorized
service center,usually an NXG dealer or its authorized
agent. All warranty repairs must be accompanied by
the original bill of sales. No other document is accept-
able or is required. This warranty gives you specific
legal rights, and you may also have other rights which
vary from state to state.
Scottsdale, AZ
email: [email protected]
web: nxgtechnology.com
SPECIFICATIONS
Operating Temperature Range -5 to +35° C (-41 to +95° F)
Operating Humidity Range 5to 90%RH (No Condensation)
Input Video Signal 0.5-1.0 Volts P-P
Input DDC Signal 5volts p-p (TTL)
Data Transfer Speed Rate 6.75Gbps(Maximum)
Video Format Supported DTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P/4Kx2K
3D video support
HDMI Output HDMI 1.4+HDCP 1.1
Support Video Color Format xv-YCC/deep color 36bit
Support Audio Format DTS-HD/true-HD/LPCM7.1/AC3/DTS/DSD
Power consumption 10 watts (Maximum)
Dimension (L x W x H) 270 x 110 x 27.5mm
Net Weight 840g
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1) Main Unit. 8-port HDMI splitter 2) 5VDC Power Supply 3) Operating Instructions
PANEL DESCRIPTIONS
Front Panel
2 3
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
CONNECTING
1) Connect the HDMI signal source into HDMI input
2) Connect the HDMI display devices into HDMI outputs
3) Insert the DC 5v power supply into power input and then connect the AC side of the power
supply into the wall outlet
Notice: Gently Insert/Extract all cables
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or other harsh chemicals
to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have damaged the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a significant change in performance;
(e) The unit has been dropped or the cabinet damaged.
2) Servicing the unit: Do not attempt to service the unit beyond that described in these
operating instructions. Refer all other servicing to authorized servicing personnel.
Rear Panel
4) Power input
5) HDMI outputs
6) HDMI input
1) Power LED Input Indicator - The corresponding LED will indicate an active HDMI connection.
2) HDMI output Indicator- The corresponding LED will indicate an active output connection.
3) Power ON/OFF
