NXP Semiconductors i.MX RT1020 User manual

Quick Start Guide
i.MX RT1020 Evaluation Kit

2
GET TO KNOW THE i.MX RT1020 EVK
Quick Start Guide
Figure 2: Back side of MIMXRT1020-EVK
Figure 1: Front side of MIMXRT1020-EVK
Debug
USB
Power
Reset
Arduino
Interface
SDRAM
JTAG
Arduino
Interface
Ethernet
Boot Mode
Select Switch
TF
ON/OFF
QSPI Flash
User
Button
i.MXRT1021
USB OTG
POR Reset
Power
Switch
DC IN:5V
Audio
Jack

3
www.nxp.com
HOW TO GET STARTED
1
The evaluation kit is shipped with a
MIMXRT1020-EVK Board and a USB
Cable (Micro B). Ensure the items
are available in the i.MX RT1020
evaluation kit.
2
Connect the MIMXRT1020-EVK
board to a PC using the included
micro USB cable to USB connector
J23.
The MIMXRT1020 EVK Board comes
preprogrammed with a demo which
flash led on the board.
3
Explore more out-of-box demos and
download software and tools on
www.nxp.com/MIMXRT1020-EVK/
startnow.
4
Enjoy your design freedom with the
MIMXRT1020-EVK.

SUPPORT
Visit www.nxp.com/support for a list
of phone numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for
complete warranty information.
www.nxp.com
NXP, the NXP logo and Kinetis are trademarks of NXP B.V. All other product or service names are the
property of their respective owners. © 2018 NXP B.V.
Document Number: IMXRT1020EVKQSG REV 0
Agile Number: 926-29856 REV A
Get Started
Download installation
software and documentation
under “Jump Start Your Design”
at www.nxp.com/MIMXRT1020-EVK.