O.M.G. Superbass Bluetooth Speaker User manual

Handleiding: O.M.G Superbass Bluetooth Speaker
(For the English version of the user manual scroll to page 3)
Hoe te gebruiken?
1. Aan/uit-knop: Druk lang op de aan/uit-knop om de luidspreker in/uit te schakelen.
Dubbelklik op het aan/uit-knop om de Bluetooth-koppelingsmodus in te schakelen.
2. Bluetooth: schakel de luidspreker in om de Bluetooth-koppelingsmodus te openen,
schakel bluetooth in verbinding op uw apparaat, zoek en maak verbinding met "X7"
3. Pauzeren en afspelen: Druk op de aan/uit/afspeelknop op het apparaat om de
muziek af te spelen of te pauzeren.
4. Volumeregeling: Druk lang op de knop ‘Volume omhoog’om het volume te
verhogen, druk lang op de ‘Volume omlaag-knop’om het volume te verlagen.
5. Volgende/vorige nummer afspelen: Druk op de knop "+" om het volgende nummer
af te spelen. Druk op de knop "-" om terug te gaan naar het vorige nummer.
6. Audio-ingang: sluit een standaard audiokabel van 3,5 mm aan op de AUX-poort, de
luidspreker schakelt automatisch over naar audiomodus.
7. Micro SD-kaartsleuf: plaats de micro SD-kaart in de sleuf, de luidspreker schakelt
automatisch over naar SD-kaartmodus. Deze luidspreker ondersteunt MP3, AAC,
WAV, FLAC, APE, WMA en andere formaten.
8. USB-A-oplaaduitgang: laad uw apparaat op via de USB-A-uitgang.
9. Laad je speaker op: sluit de oplaadkabel aan op je speaker en een stroombron om te
beginnen met opladen.
10. Oplaadindicator: Knipperend lampje betekent dat het oplaadt. Continu licht
betekent dat hij volledig is opgeladen.
11. TWS-functie: 2 luidsprekers inschakelen, dubbelklik op de knop "+", na het koppelen,
maak verbinding met bluetooth via een apparaat, 2 luidsprekers zorgen voor een
ultieme geluidsbeleving
Opmerking: de levensduur van de batterij van dit product is gebaseerd op de activiteit van de
gebruiker en de volumeregeling.

Veiligheidsinstructie
•Vermijd te allen tijde water, hitte, vuur, het binnendringen van de batterij en zware
valpartijen.
•Steek nooit meer voorwerpen in de andere USB-poorten dan de USB-connectoren.
•Zodra het product volledig is opgeladen, wordt uw accupakket automatisch
uitgeschakeld om stroom te besparen.
•Tijdens het opladen kan de batterij enigszins warm aanvoelen.
•Reinig de accu niet met water of andere producten, reinig de buitenkant met een
licht bevochtigde doekje of keukenpapier
•Opzettelijke en fysieke schade aan de batterij valt niet onder de
garantievoorwaarden
•De opslagtemperatuur van de batterij ligt tussen -10°C - + 60°C, de
bedrijfstemperatuur is 0°C - 45°C
•Laad de batterij vóór het eerste gebruik volledig op om de batterijduur te
maximaliseren
•Het is aan te raden om uw powerbank op te laden met een muuroplader/adapter.
•Voor betere prestaties, vermijd het opladen van de powerbank terwijl uw apparaat is
aangesloten.
•Gooi de batterij op de juiste manier weg; vraag uw plaatselijke
afvalverwerkingsbedrijf om advies.
•U mag de batterij nooit uit elkaar halen, beschadigen of verbranden.
•Gebruik de originele accessoires zoals oplaadkabel en adapter voor een goede
performance

User manual: O.M.G Superbass Bluetooth Speaker
How to use?
1. Power button: Long press the power button to turn on/off the speaker. Double-click
the power button to turn on Bluetooth pairing mode.
2. Bluetooth: Turn on the speaker to enter Bluetooth pairing mode, enable Bluetooth
connection on your device, search and connect to '' x7"
3. Pause and play: Press power/play button on the device to play or pause the music.
4. Volume control: Long press the volume up button to increase in volume, long press
the volume down button to reduce in volume.
5. Play Next/Previous Song: Press the "+" button to play next song. Press the "-" button
to play previous song.
6. Audio input: Connect a standard 3.5mm audio cable to the AUX port, the speaker will
automatically switch to audio mode.
7. Micro SD card slot: Insert micro SD card to the slot, the speaker will automatically
switch to SD card mode. This speaker supports MP3, AAC, WAV, FLAC, APE, WMA and
other formats.
8. USB-A charging output: Charge your device through USB-A output port.
9. Charge your speaker: Connect the charging cable to your speaker and a power
source to begin recharge.
10. Charging indicator: Flashing light means its charging. Solid light means it's fully
charged
11. TWS function: Turn on 2 speakers, double click the "+" button, after pairing, connect
to your device with bluetooth,2 speakers can create a better surround sound
Note: The battery life of this product is based on user's activity and volume control.

Safety Instructions
•Avoid water, heat, fire, penetration of the battery, and severe drops at all times.
•Do not insert other objects into the USB ports other than the USB connectors.
•Once the product is fully charged, your power pack automatically shuts off to save
power.
•During charge & recharge, battery may feel slightly warm.
•Do not clean the battery with water or other cleaning products, clean the exterior
with a slightly wetted cloth or napkin
•Any intentional and physical damage to the battery will not be under the warranty
conditions
•Battery storage temperature is between -10°C - + 60°C, operating temperature is
0°C - 45°C
•Fully charge the battery before first use to maximize the battery life
•Recommend recharging your power bank with a wall charger/adapter.
•For better performance, avoid recharging the power bank while your device is
connected to it.
•Dispose of battery properly; ask local disposal facility for advice.
•Do not disassemble, damage or incinerate the battery at any time.
•Please use the original accessories such as charging cable and adapter for better
performance
Table of contents
Languages:
Popular Speakers manuals by other brands

Spector&Co
Spector&Co T1016 instructions

Jumon International
Jumon International BTS-JM03 Product specification

Sven
Sven MS-304 user manual

AR
AR AWSEE2BK quick start guide

Shenzhen Vanke Loudspeaker Products
Shenzhen Vanke Loudspeaker Products M5200B user manual

Atlantic Technology
Atlantic Technology ICTS-6.2e installation instructions