O'xon BS1 User manual

O’XON BS1
QUICK START GUIDE
PACKGE CONTENTS
zSpeaker
zUSB Cable
z3.5mm Stereo (Wired Audio)
zQuick Start Guide
FUNCTION
3.5mm Audio Input / Power Input(Micro USB Port) / Power Button / LED
Volume Down(Previous) / Volume UP(Next) / NFC / Play/Pause/Talk/Pairing Button

BATTERY CHARGING
zPlug BS1 into your wall charger or computer via micro USB cable.
zFull charge takes 3 hours The LED will turn off when fully charged.
BLUETOOTH
zWhen turned on for the first time, BS1 willautometically enter pairing mode.
zPress it to connect your phone with the wireless speaker, you will find the <BS1>
character on the menu of your smart phone.
zTo enter pairing mode thereafter, press down this button to enable the bluetooth.
*It needs around 20 seconds when connecting the bluetooth in the first time.
SPECIFICATIONS
Speaker Power--------------------------2W x 2
Speaker Size----------------------------40mm x 2
Frequency---------------------------160Hz-15kHz
SNR ≥80dB
Audio Input------------Bluetooth, 3.5mm Audio
P ower Input-----------------------------Micro USB
Built-in Microphone------------------------Yes
Battery Capacity--------------------1000mAh
Working Hours------------------------------10h
Dimensions--------------------177x56x58mm
Material--------------------------------------ABS
Net Weight--------------------------------- 360g

SAFETY INFORMATION
NST ALL RIGHTS RESERVED.
REV 1406
SAFETY INFORMATION
CE DECLARATION
We Beijing Natural Smart-Tech Co., Ltd. declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EU.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by tuning the
equipment off and on, the user is encouraged to try correct the interference
by one or more of the receiving measures:
Reorient or replace relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless user
could lose the authority to operate this equipment if an unauthorized change
or modification is made.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.