OAKWORKS Sleep Support System User manual

Sleep Support™ System
INSTRUCTION MANUAL
OAKWORKS®
The Sleep System that Enables
Face-Down Recovery
to Fit Your Life.
Brought to you by
OAKWORKS LEASING™, INC

This system is designed to be compliant with
face-down recovery requirements as prescribed
by your physician. The OAKWORK®Sleep System™
offers comfortable ergonomic support for the head,
neck, shoulders and lower back allowing you
to get a good nights sleep.
Versatile,Comfortable the OAKWORKS®
Sleep Support™
System
Sleep Support™System
Product Description
Torso Cushion Face Support Platform -
Cam Locks circled
Crescent Face Cushion
3-Pad Face Cushion
w/Face Plate
Flannel covers for both style of
cushion & instructional video
White Cam Locks (2)
Left White Cam Lock
(unseen in picture;
see it above on
Platform)
pg 2
face-down ccmfort
Cheek
Pads
Forehead
Pad

pg 3
How to Use the Sleep Support System™:
Use Instructions
Setting-Up and Using the Sleep Support System™:
• Place the Face Rest Platform on top of the mattress, at the head of
the bed. Next place the Torso Cushion flat side dow, with the angled
part of the cushion aimed towards the foot of the bed. (Fig 1)
•Lie on top of the Torso Cushion; your shoulders should be positioned
near the edge of the cushion near the face rest. (Fig.2)
• Verify that all 3 white cam locks are unlocked. Holding the U-shaped
bar of the Face Rest Platform, (the Face Rest Cushion is attached
to the platform with Velcro®brand hook & loop fastening strips)
pull the face rest toward you until your forehead rests comfortably
on the Face Rest Cushion. You can move the cushion around in
this unlocked position until your neck, head and shoulders are
comfortable and supported.
Note: The recommended position for the face rest should be horizontal
but angled slightly down so your forehead is lower than your chin.
(see Fig 2) You should be looking face-down at the back of the Face
Rest Platform.
The face rest should be in a horizontal position with
your face parallel to the mattress. Gently tighten the cam locks to
lock the face rest in place. (Fig. 3)
• You may find you will need to adjust the Torso Cushion by moving
it further away or closer to the Face Rest for optimum comfort and
support. You can also adjust the Face Rest Cushion by moving it
on the platform. It is attached with hook & loop fasteners and
moves easily; just pull up and reposition it.
• To relieve tension in the lumbar region, you can use a pillow
under the lower legs to raise them a bit, loosen the possible
strain and relax in an ergonomic position. (Fig. 4)
Fig. 3
Fig. 4
Fig. 1
Fig. 2

OAKWORKS LEASING™, INC
Use Instructions (cont.)
pg 4
Returning a Rental Unit:
When the doctor has informed you that you no
longer need to maintain the face down position,
you simply follow the Equipment Return Instructions
included on the yellow laminated card that is
attached to the unit. Use the included checklist to
be sure all items are accounted for and returned.
Part no. MMINXX0113 0205
923 E. Wellspring Rd., New Freedom, PA 17349
800-916-4592 717-235-6807 FAX: [phone]
www.owleasing.com
Setting-Up and Using the 3-Pad Face Cushion:
The 3-Pad Cushion can be used in place of the Face Rest Cushion for use
with your eye patch or globe.
•Attach the Black Support Plate to the Face Support Platform. It
attaches to the U-bar of the platform with Velcro®brand hook &
loop fastening strips. (Fig.5)
• Place the forehead pad on the support plate first. The pads attached
to the support plate with the hook & loop fasteners as well. Lay
down on the Torso Pad and hold the check pads up to your face
where they are the most comfortable. Be sure they are not in the
way of your eye patch or globe. (Fig. 6)
• Still holding the cheek pads to your face, lean forward onto the
support plate until your forehead rests on the forehead pad and
the cheek pads contact the fastening strips on the plate. (Fig. 7)
Additional Tips :
•The Face Rest Cushion can also be adjusted for larger or smaller faces
by flexing the ends of the cushion further (Fig. 8a) or closer (Fig.8b)
apart. Hold the cushion in the desired position and place it on the
U-shaped bar of the Face Support Platform where the Velcro®brand
hook & loop fastenings strips will hold it in place
• All parts of the Seated Support can be cleaned using a mild detergent
or Green Windex. A diluted 1/100 bleach solution for disinfecting
can be used. Dry the equipment immediately to remove excess
cleaning solution. Using strong cleaners that contain alcohol, acetone,
higher concentrations of bleach can shorten the life of the fabric
or discolor it.
Fig. 7
Fig. 5
Fig. 6
Fig. 8a Fig. 8b