Oasys TEG9300-T User manual

O1 Quick Guide
1 PRODUCT INTRODUTION
Power button
Short Press: Light the screen, lock the screen.
Long press: In shutdown state, long press 2-3 seconds to turn on;
When in use, press 2-3 seconds for a long time, and you can choose to Power off, Restart or
Screenshot.
In the crash state, long press 10 seconds to restart automatically.
Volume up button
Compatible with the functions of code scanning and volume up adjustment.
Volume down button
Compatible with the functions of code scanning and volume down adjustment.
Scanner
Scanning recognition of Barcode and QRcode can be carried out by using scanning dock
when scanning function is turned on.
Rear camera
Supports photographing and 1D/2D code quick scanning.
Type-C USB
Used For device charging,and you can also plug in OTG.
HeadTerminal
Insert a wired headset, and the sound will be switched from the speaker to the headset.
MIC
Used to make Terminal calls, video and voice conversations.
Speaker

Used For listening to music or sound amplification.
Indicator light
Android Charging and Notification Indicator Lamp (Breathing Lamp) ( Red, Green)
SD card slot and SIM card slot(up) and Psam card slot(down)
Used for inserting the SIM Card ,Psam Card and SD Card
Printing instructions
This device supports 58mm thermal paper with the specififications of 57±0.5mmφ40mm.
①Open the paper container
②Feed the paper correctly into the paper container in thedirection as shown, and pull some
paper outside the cutter;
③Close the cover of the paper container to fifinish printing paper feeding .
2 TECHNICAL INDICATORS OF PRODUCTS
• Android 9.0
• CPU Model：MT6761D
• Quad core 1.8GHz
• LTE/UMTS/GSM/WIFI 2.4&5G/Bluetooth
• 2GB RAM, 16GB ROM
• LCD/CTP：5.45HD+
• Scanner：E3
• Rear camera：5M AF
• Bluetooth 5.0
• Wi-Fi 802.11a/b/g/n（2.4G/5G）
• USB Type C
• Battery 4.2V/5000mAh
• Printer：Seiko
3 ATTENTION
PRODUCT SAFETY WARNINGS

Use responsibly. Read all instructions and safety information before use to avoid injury.The limit
operating ambient temperature of the equipment declared by the manufacturer is-15~55°C
Battery safety
Charge battery only at ambient temperatures ranging from 40°C.
(1)CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type of battery recommended by the manufacturer. Dispose of used batteries
according to battery manufacturer’s instructions.
(2)CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
(3)CAUTION:Battery charging temperature upper limit is 40°C.
Adapter safety
When charging, please place the device in an environment that has a normal room
temperature and good ventilation. It is recommended to charge the device in an environment
with a temperature that ranges from 0°C~40°C.For altitude 2km below use only
Wi-Fi Safety
Turn Wi-Fi off in areas where Wi-Fi use is prohibited or when it may cause interference or danger,
such as in airplanes while flying.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless Terminal is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the

Federal Communications Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the safety of all persons,
regardless of age and health. The exposure standard for wireless mobile Terminals employs
a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6 W/kg. * Tests for SAR are conducted with the Terminal transmitting at its
highest certified power level in all tested frequency bands. Although the SAR is determined
at the highest certified power level, the actual SAR level of the Terminal while operating can
be well below the maximum value. This is because the Terminal is designed to operate at
multiple power levels so as to use only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the lower the power output. Before a
Terminal model is available for sale to the public, it must be tested and certified to the FCC
that it does not exceed the limit established by the government adopted requirement for
safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn
on the body) as required by the FCC for each model. The highest SAR value for this model
Terminal when worn on the body, as described in this user guide, is 1.054W/Kg(Body-worn
measurements differ among Terminal models, depending upon available accessories and
FCC requirements). While there may be differences between the SAR levels of various
Terminals and at various positions, they all meet the government requirement for safe
exposure. The FCC has granted an Equipment Authorization for this model Terminal with all
reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR
information on this model Terminal is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/ oet/fccid after searching on
FCC ID: 2AYKQTEG9300-TAdditional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at
http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile
Terminals used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The
standard incorporates a sub-stantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance
of 5mm must be maintained between the user’s body and the handset, including the
antenna. Third-party belt-clips, holsters,
and similar accessories used by this device should not contain any metallic components.
Body-worn accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the supplied or an approved
antenna.