OBaby Grace Mini User manual

Designed in the UK
IMPORTANT
KEEP FOR FUTURE REFERENCE
Instructions
CotBed
Grace Mini
Version: R3-0

Safety Warnings Safety Warnings
2 3
obaby.co.uk obaby.co.uk
Thank you for choosing Obaby. This cot bed conforms to BS EN 716 :2017 and
BS 8509 :2008 + A1:2011. To ensure that your cot bed is used in accordance with these
instructions, please read them fully.
Your child’s safety may be affected if you do not follow these instructions.
WARNING: A child’s safety is your responsibility.
WARNING: Assembly should be carried out by a competent adult only.
WARNING: Do not use more than one mattress in the cot bed.
WARNING: Do not use the child’s bed near heat sources, windows and other furniture.
WARNING:
WARNING: Do not use this child’s bed if any part is broken, torn or missing. Use only spre parts
WARNING:
e.g: strings, blind/curtain cords etc.
• Please be aware that the lowest base position is the safest and the base should always
be used in that position as soon as the baby is old enough to sit unaided.
• The thickness of the mattress chosen should be such that the internal height (surface
of the mattress to the upper edge of the cot frame) is at least 500mm when the base
is set in the lowest position and a minimum of 200mm when the cot base is set in the
highest position.
• We recommend you use the Obaby Mattress Size 120 x 60 cm for this cot bed. The
mattress should be no more then 30mm shorter or narrower than the internal length
or width of the cot bed.
working order.
be changed into the bed mode for use up until 4 years of age.
• The cot bed is designed to be dismantled for storage or transportation.
should not be placed too close to other furniture or windows, blind cords, curtain pulls or
between the wall and the side of the bed.
no screws are loose, as a child could trap parts of the body, or clothing (e.g. ribbons, draw
strings, necklaces) this could lead to strangulation.
• During assembly children should be kept away from the product due to possible
• Wood is a natural material, the colour will darken with age.
ROUTINE CARE & MAINTENANCE
– For cleaning, use only a mild detergent and warm water.
– DO NOT USE BLEACH.
parts as needed.
of any products without prior notice. If you need any assistance please contact your Obaby re-
tailer from whom you purchased your product, who will take appropriate action.

4 5
obaby.co.uk obaby.co.uk
Cot Bed AssemblyParts List
www.obaby.co.uk www.obaby.co.uk
1.
Do not fully tighten screws until the assembly is complete.
2.
40mm 65mm

6 7
obaby.co.uk obaby.co.uk
Cot Bed Assembly
www.obaby.co.uk
Finally, tighten all screws with the Allen key provided.
3.
4.
If you are happy with your purchase, please leave
a review on our TrustPilot account using the
following link:
https://uk.trustpilot.com/review/www.obaby.co.uk

obabyuk
obaby.co.uk
obabyuk
Obaby_UK