Observa Telecom QX301A User manual

3.5G CONNECT
User Manual

1
Index
3.5G Connect Introduction ............................................2
Internet service..............................................................7
SMS service ....................................................................9
Contacts .......................................................................14
Settings ........................................................................18
FAQs.............................................................................23

2
3.5G CONNECT INTRODUCTION
1. To launch the Network Connect, double-click the
shortcut icon on the desktop. It should be noted that:
If the PIN code enabled, enter the correct one, then
click OK. The (U)SIM will be locked after three retries of
incorrect PIN code inputting;
Enter the correct PUK to retrieve the default PIN code.
After ten retries of incorrect PUK code inputting, please
contact with your service provider;
With the wrong PIN and PUK, all the network services
are unavailable.
2. Main interface introduction

3
: Connect /disconnect to the internet
: Access to the SMS service interface
: Access to the Phonebook interface
: Set parameters
3. Status information
Status Description
New message New message(s) arrived.

4
Message full
Indicates the (U)SIM’s storage
of SMS is full.
No device
Indicates that system cannot find
the device.
Initializing
Indicates that the device is in the
process of initializing.
Searching
The device is searching for the
network.
No service No suitable network.

5
No (U)SIM card
(U)SIM card not inserted or the
device cannot recognized the
(U)SIM.
Invalid (U)SIM
card
The (U)SIM is out of service.
Network signal Indicate the signal
strength of the network.
Network type GSM/GPRS, UMTS.
Data service
EDGE available, HSPA

6
available.
4. Indicator light description
State of indicator light Description
Twist in multicolour circularly Device initialization
Twist in red colour slowly Abnormality of device
Twist in
green/blue/purple/yellow
slowly
Registered
HSPA/UMTS/EDGE/GPRS
Luminous continuously Data transmitting

7
INTERNET SERVICE
1. Connecting with the default connection profile
Click to set up the
connection;
2. Connect to the internet with the user-defined profile
Click , select Connection Profile;
Click New, fill in all the parameters, then click ok.
Click Import, Select one item from the list and click
OK.
Note: Contact with your service provider to get the
correct parameters.

8
3. Statistics information
The following window will be displayed at lower right
corner of main interface when connecting to the
internet.
4. Disconnect from the internet
Click to disconnect the internet
connection.

9
SMS SERVICE
Click to enter SMS (Short Message Service) service
interface.
1. Creating and sending a message.
Click :
Input the recipient number by one of the following
options:
Enter the number directly;
Click Send to, choose the recipient number
from the phonebook and add to the sending
list , then click OK.
Enter the message content;

10
Click Send or Save to Draft. The message will be
saved in the Draft when failed to send.
Note:
You can group send a message at most 20
recipients;
Each number should be separated by “,”;
The message cannot expand 2,048 characters at
most.
2. Inbox
The following prompt box will be displayed when
received a new message;

11
Reply : Access the edit interface, write the
content, click Send or Save to Draft;
Forward : Forward the selected message;
Delete : Delete the selected message.
Note:
The new message will be saved in PC when 3.5G
Connect running only, else in (U)SIM instead;
You can use “Shift” or “Ctrl” to selected several
messages;

12
3. Outbox
The message in the Outbox can be deleted or forwarded.
4. Draft
The MSG sent unsuccessfully will be saved in the
Draft .
Click the selected message;
Confirm the recipient and the content, and click
Send or Save to Draft.
5. Recyle
All deleted information will be saved in the Recyle.
6. The selected SMS can be operated as follows:
Save number

13
To save the sender’s information to the (U)SIM
card or PC.
Delete text message
To delete the selected message.
Move to
To move the selected message to Outbox or Draft.
Copy to
To cope the seledted message to Outbox or Draft.
SMS Export
Right-click the selected the message;
Click SMS Export ;
Specify the path and the file name, and click
Save.
Note: The exported message will be saved as a *.csv file.

14
CONTACTS
Click to enter Contacts interface.
1. New
Click ;
Enter the Name and Mobile, and save it in the
(U)SIM card or PC.
2. Searching a contact
Click ;
Enter the key characters of you want to find in the
;

15
The result will be displayed in turn.
3. Viewing a contact
Click Local or (U)SIM to display the contacts
interface accordingly;
Select a contact, then you can operate as follows:
Edit : Modify the selected contact;
Delete : Delete the selected contact;
Send SMS : Send a message to the
selected contact;
Copy to: Copy the contact between (U)SIM
card and PC.

16
Note: The deleted contact information cannot be
retrieved.
4. Import
Right-click the mouse;
Click Contacts Import;
Select the *.vcf or *.csv file and click Open;
The import file will be saved in the current
interface.
5. Export
Right-click the selected contact;
Click Contacts Export;

17
You can saved the contact file as *.csv file or *.vcf
file;
Confirm the name and the path the file saved, then
click Save.

18
SETTINGS
Click to list the functions.
1. PIN Management
Enable PIN
Click Enable PIN;
Enter the correct PIN code and click OK.
Note: The PIN code should be a numeric
string of 4-8 digits.
Disable PIN
Click Disable PIN;

19
Enter the correct PIN code and click OK.
Modify PIN
Click Modify PIN;
Enter the old PIN code and new PIN code,
confirm the new PIN code and click OK.
2. Connection Profile
General
You may choose the alert tone when
connected/disconnected to the internet.
Text Message Setting
You may active the message alert tone, and
also can set up your favorite tone via
selecting a *.wav file in the PC.