Oceanic Datamask User manual

WELCOME
WELCOME
•This QuickStart Guide will help you to understand
the basic surface and underwater operation of the
Oceanic DataMask.
•Prior to diving with the DataMask, you must also
read and understand both the Operating Manual and
the Oceanic Dive Computer Safety and Reference
Manual which provide detailed operating
instructions, important warnings and safety
recommendations as well as general product
information.

ACTIVATION
ACTIVATION
•To Manually Activate the
DataMask, momentarily press and
release the Advance (TOP)
Button.
•When manually activated, the unit
will enter Diagnostic Mode,
displaying all segments of the
LCD as 8's, followed by dashes (-
-), then a countdown from 9 to 0.
•Diagnostic Mode checks the
display, battery voltage and
barometric pressure to ensure that
everything is within tolerance and
functioning properly.

ACTIVATION
ACTIVATION
•The DataMask will also
automatically activate by
Wet Contact (only if Wet
Activation is set ON).
•If no dive is made within 2
hours after initial activation,
the unit will automatically
deactivate.

CONTROL BUTTONS
CONTROL BUTTONS
•The Control Buttons allow
you to select display options
and access specific
information when you want
to see it – both on the
surface and underwater.
•They are also used to enter
personal settings and control
the Backlight.
•Each button has 2 functions
– press and release and
press and hold.
Select
<S-Side>
Advance <A-TOP>

DataMask
DataMask
•SURFACE MAIN
•Tissue Loading Bar Graph
•Surface Interval
•Pressure
•Operating Mode/Elevation
•Hold <A-TOP> button: Change
Mode. Press <A-TOP> to
confirm.
•Press <A-TOP> button 3X:
Activate Receiver >
Transmitter Battery Check
•Press <S-SIDE> button:
Backlight > Toggle ON/OFF
•Press <A-TOP> button: View
Alternate Displays, Plan,
Fly/DSAT, Log, and History
•Hold <S-SIDE> button: Set
Mode

DataMask
DataMask
•SURF ALT 1
•O2 Bar Graph
•FO2 Set Point
•Bypass if not set for Nitrox
•5 second return to main
•Press <A-TOP> button:
Alternate Display 2

DataMask
DataMask
•SURF ALT 2
•Time of Day
•Temperature
•5 second return to main
•Press <A-TOP> button:
Plan Lead-In

DataMask
DataMask
•PLAN LEAD IN
•FO2 Set Point
•Bypass if not set for Nitrox
•5 second return to main
•Press <S-SIDE> button:
Pre-Dive Planning
Sequence (PDPS™)
•Press <A-TOP> button: Fly
Time