OEM Tools 25896 User manual

1
INSTALLATION AND OPERATION MANUAL
8 GALLON PORTABLE OIL DRAIN
OEMTOOLS®
PART# 25896
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR
TO INSTALLATION AND OPERATION. BY PROCEEDING YOU
AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND
THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS
MANUAL TO ALL OPERATORS. FAILURE TO OPERATE THIS
EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
REV: 4/2012
PART# 25896
Keep this operation manual near
the machine at all times. Make sure
that ALL USERS read this manual.
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the
purchaser upon receipt from the carrier. Consequently,
claims for the material damaged in shipment must be
made by the purchaser against the transportation
company at the time shipment is received.
BE SAFE
OEMTOOLS®Oil Drains are designed and built with
safety in mind. However, proper training and thoughtful
operation on the part of the operator can increase your
overall safety. DO NOT operate or repair this equipment
without reading this manual and the important safety
instructions shown inside.
165 East Second Street
P.O. Box 3
Mineola, NY 11501
Customer Service: 1-866-458-2472
www.oem-tools.com

2
IMPORTANT SAFETY TIPS
ALWAYS MAINTAIN A CLEAN WORK AREA. KEEP
VISITORS AND ESPECIALLY CHILDREN AWAY
FROM WORK AREA.
THIS OIL DRAIN IS TO BE OPERATED BY
PROPERLY TRAINED PERSONNEL ONLY.
OPERATION BY UNTRAINED
PERSONNEL MAY RESULT IN INJURY AND /OR
PROPERTY DAMAGE.
CALL OEM CUSTOMER SERVICE AT 1-866-458-2472
If within 90 days from date of purchase, this product fails
due to a defect in materials or workmanship, return the
product with proof of purchase, prepaid, to OEM
Warranty Dept., 3580 E. Raines Rd. #3, Memphis, TN
38118, for replacement with an item of equal or greater
value.
This warranty exc
ludes incidental/consequential
damages and failures due to misuse, abuse or normal
wear and tear. This warranty gives you specific legal
rights, and you may also have other rights, which vary,
from state to state. OEM will not be responsible for any
consequential or incidental damages arising from the
breach of this or any other warranty, whether expressed,
implied or statutory.
Some states do not allow the exclusion or limitation of
consequential or incidental damages, so the above
exclusion may not apply to you. This warranty gives you
specific legal rights. You may also have other rights
which vary from state to state.
WARRANTY POLICY
THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF
ANY AND ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
If your OEM TOOLS®machine is not functioning
properly, call immediately. On some occasions, an
independent contractor may be hired to do the repairs.
Within the warranty period, a customer should not hire
his own contractor unless it is authorized in writing by
OEM TOOLS®.
If it is necessary to return equipment for repairs, we will
so advise you. When returning equipment for repairs,
see that machines are properly crated and protected,
and prepay transportation.
Defective parts replaced at no charge must be returned
to OEM TOOLS® within 90 days of the date that the
replacement parts are shipped; otherwise, you must
pay for the replacement parts at the current selling
price.
SHIPPING DAMAGE
If any damage is found, notify your carrier
immediately and save all packaging materials for
the carrier’s inspector to examine. Failure to
promptly report damage could result in denial of
your claim.
A trucking company’s procedure for handling damage is
as follows:
1. Immediately send out an inspector. An inspection
report is filled out on the spot, a copy of which is
given to the customer.
2. The customer has to call the carrier to request a
claim form.
3. The customer mails in the claim form.
4. The claim usually takes two (2) months to
process.
If a unit is seriously damaged, we may be able to
intervene, requesting that the damaged unit be
returned and a new unit delivered.
For Parts Or Service Contact:
OEM TOOLS®Customer Service
3580 E. Raines Rd. Suite 3
Memphis, TN 38028
Tel: [phone]
Fax: [phone]

3
THIS OPERATING MANUAL CONTAINS IMPORTANT
DETAILS CONCERNINGTHE SAFE OPERATION OF
THIS EQUIPMENT. THE USER MUST READ AND
UNDERSTAND THESE DETAILS BEFORE ANY USE
OF THE EQUIPMENT. THIS MANUAL MUST BE
RETAINED FOR FUTURE REFERENCE.
OWNER/OPERATOR
RESPONSIBILITY:
The owner and/or operator shall study the product
instructions and retain them for future reference.
The owner and/or operator shall have an understanding
of the product operating instructions and warnings
before operating the equipment.
Warning information shall be emphasized and
understood. If the operator is not fluent in English, the
product instructions and warnings shall be read to and
discussed with the operator in the operator’s native
language by the purchaser/ owner or his designee,
making sure that the operator comprehends its
contents.
INSPECTION
Visual inspection should be made before each use of
the Oil Drain. This inspection should check for abnormal
conditions such as cracked welds, leaks, and damaged,
loose or missing parts.
Any product that appears to be damaged in any way, is
found to be worn or operated abnormally, must be
removed from service immediately.
Any product that operates abnormally shall be removed
from service until repaired by a qualified repair service
center.
If the product is accidentally subjected to an abnormal
load or shock, it must be taken out of service
immediately and be inspected by a qualified repair or
service center.
It is recommended that an annual inspection is
performed on the Oil Drain and that any damaged or
worn parts, decals or warning labels be replaced with
manufacturer’s specified parts.
ALTERATIONS
Because of potential hazards associated with this type of
equipment, no alterations shall be made to the product.
FOR YOUR SAFETY AND TO PREVENT INJURY:
DO NOT EXCEED RATED CAPACITY.
OVERLOADING CAN CAUSE DAMAGE TO OR
FAILURE OF THE OIL DRAIN.
KEEP HANDS AND BODY CLEAR OF ALL PINCH
POINTS.
THIS OIL DRAIN IS DESIGNED FOR USE ONLY ON
HARD LEVEL SURFACES CAPABLE OF
SUSTAINING THE LOAD. USE ON OTHER THAN
HARD LEVEL SURFACES CAN RESULT IN
INSTABILITY AND POSSIBLE LOSS OF LOAD.
NO ALTERATIONS TO THE OIL DRAIN SHALL BE
MADE.
READ, STUDY AND UNDERSTAND THE
OPERATING MANUAL PACKED WITH THIS
EQUIPMENT BEFORE OPERATING.
FAILURE TO HEED THESE WARNINGS MAY
RESULT IN LOSS OF LOAD, DAMAGE , AND/OR
FAILURE RESULTING IN PROPERTY DAMAGE,
PERSONAL OR FATAL INJURY.
DISPOSE OF USED OIL AND OTHER
AUTOMOTIVE FLUIDS IN COMPLIANCE WITH
LOCAL, STATE AND FEDERAL ENVIRONMENTAL
LAWS AND REGULATIONS.

4
PARTS & ASSEMBLY
SPECIFICATIONS
Assembly Instructions
1. Remove all contents from the package.
2. Assemble two-piece down spout using the provided bolt, nut and washer.
3. Insert the funnel into the down spout using the Philips screws to secure.
4. Install clamp on to tank neck.
5. Insert down spout and funnel assembly into tank, tighten clamp at desired height.
Funnel
8 Gallon
Tank
Two-Piece
Down Spout
Clamp