OEM Tools 24607 Service manual

UNPACKING
After unpacking, inspect carefully for any
damage that may have occurred during
transit. Check for loose, missing, or
damaged parts. If any damage is observed,
a shipping damage claim must be filed
with carrier. Do not use the flashlight if it
appears damaged in any way, operates
abnormally or is missing parts.
Operating Instructions and Parts Manual 24607
Adjusts to 5 Light Modes:
100% = 500/450 Lumens
30% = 150/125 Lumens
10% = 55/40 Lumens
Strobe
S.O.S.
Anti-Slip Design
80
MAX OUTPUT MAX RUNTIME BEAM DISTANCE
15m
IMPACT RESISTANCE
1.5m
WATER RESISTANT
500
LUMENS
MAX RUNTIME BEAM DISTANCE
IMPACT RESISTANCE
32827
100
LUMENS
MAX OUTPUT
5h
MAX RUNTIME BEAM DISTANCE
50m
IMPACT RESISTANCE
1.5m
WATER PROOF
IPX-6
Flashlight Slim Light
MAX OUTPUT
450
LUMENS
Flashlight Slim Light
MAX RUNTIME
3.5h 3.5h
MAX RUNTIME
Flashlight Slim Light
BEAM DISTANCE
Flashlight Slim Light
IMPACT RESISTANT
170m 30m
1m 1m
11 Samsung
SMD Bulbs
Anti-Impact PC Lens
USB Connection
for Charging
Please read and save these instructions. Read through this owner’s manual carefully before using the product. Protect yourself and
others by observing all safety information, warnings and cautions. Failure to comply with the instructions could result in personal injury
and/or damage to the product or property. Please retain instructions for future reference.
PRO RECHARGEABLE FLASHLIGHT
WITH DUAL FUNCTION LED AND
UV INSPECTION LIGHT
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
[email protected]
3 Powerful
TRUE UV LEDs
Thank you very much for choosing an OEMTOOLS®Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS®cannot be responsible for issues arising
from modification. We strongly recommend this product is not modified and/or used for any application other than that for which
it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first contacted
customer service to determine if it can or should be performed on the product.
The following safety information is provided as a guideline to help you operate your Rechargeable Flashlight under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known
or not followed. The following safety instructions are to provide the user with the information necessary for safe use and operation.
Please read and retain these instructions for the continued safe use of your tool. Failure to follow instructions listed below may result in
serious injury. In addition, make certain that anyone who uses the equipment understands and follows these safety instructions as well.
WARNING
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result
in property damage.
NOTES:Provide clarity and helpful information.
09/16
2016 OEMTOOLS®
Cree (T6)
Bulb

2
Operating Instructions and Parts Manual 24607
09/16
2016 OEMTOOLS®
PRO RECHARGEABLE FLASHLIGHT
WITH DUAL FUNCTION LED AND
UV INSPECTION LIGHT
ULTRA SLIM INSPECTION LIGHT
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your flashlight. Read this manual carefully. Learn the
flashlight’s applications and limitations, as well as, potential
hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work
areas invite accidents.
3. Keep children away. All children should be kept away from
the work area. Never let a child handle a tool without strict
adult supervision.
4. Use safety equipment. Eye protection should be worn at all
times when working this light tool. Use ANSI approved safety
glasses. Everyday eyeglasses are NOT safety glasses. Dust
mask, non-skid safety shoes, hard hat or hearing protection
should be used in appropriate conditions.
5. Do not use the flashlight if the switch does not turn it on
and off. Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
6. Check for damage. Check your flashlight and batteries
regularly. If part of the flashlight is damaged it should be
carefully inspected to make sure that it can perform its
intended function correctly. If in doubt, the part should be
repaired or replaced.
7. Keep away from flammables. Do not attempt to operate this
flashlight near flammable materials or combustibles. Failure
to comply may cause serious injury or death.
PRODUCT SPECIFICATIONS
• Lightweight, anodized aluminum housing
• Charge time: 5 Hours
• Accessories: USB Charging Cord, AC Adapter, (1) 18650 Rechargeable Battery and Magnetic 180° Swivel Hook
FLASHLIGHT
Mode 100% 30% 10% Strobe S.O.S.
Output 500 150 55 / /
Runtime 3.5 Hours 6 Hours 20 Hours / /
Beam Distance 170m /510 ft.
Impact Resistant 1m
Dimensions 6.5” Length 1.3” Diameter 1.1” Head
Mode 100% 30% 10% Strobe S.O.S.
Output 450 125 40 / /
Runtime 3.5 Hours 6 Hours 20 Hours / /
Beam Distance 30m /90 ft.
Impact Resistant 1m
Dimensions 7.9” Length 0.9” Diameter 1.2” Head

3
Operating Instructions and Parts Manual 24607
09/16
2016 OEMTOOLS®
PRO RECHARGEABLE FLASHLIGHT
WITH DUAL FUNCTION LED AND
UV INSPECTION LIGHT
OPERATING INSTRUCTIONS
1. Basic operation: slightly touch the black button on the body to
turn the light on.
2. Light mode operation: press on once for 100% brightness,
press again for 30% brightness, press again for 10%
brightness, again for Strobe and again for S.O.S. To turn the
light off press it one more time after S.O.S. mode. To use the
TRUE UV LED light, press the purple button on the back of the
ultra slim inspection light attachment. To turn off, press the
purple button again.
3. To change the flashlight to the ultra slim inspection light,
simply screw off the flashlight attachment and screw on the
ultra slim inspection light attachment. Store the attachment
not being used in a safe place to prevent damage to the
lights.
BATTERY REPLACEMENT
1. Plug the USB cord into the USB port on the flashlight.
2. Make sure 18650 battery is correctly placed into the body of
the flashlight.
3. Plug USB cord into charging unit.
4. Plug charging unit into 120V outlet.
5. (1) 18650 Li-Ion battery will fully recharge in
5 hours. At 100% power, you should have a fully
charged beam for up to 3.5 hours.
NOTE
OEMTOOLS®and/or its distributors have provided the parts list and assembly diagram as a reference only. Neither OEMTOOLS®and/
or its distributors make any representation or warranty of any kind to the buyer and/or user of this product that he or she is qualified to
do any repairs or replace any parts of this product. OEMTOOLS®and its distributors expressly state that all repairs or parts replacement
should be done by certified or licensed technicians. The buyer assumes all risk and liability arising out of his or her repairs or parts
replacement to the original product.
Figure Description Quantity
A 500 Lumen Rechargeable Flashlight 1
B Charging Unit 1
C 3.7V 18650 Li-Ion Battery 1
D 450 Lumen Ultra Slim Inspection
Light
1
E USB Cord 1
F Magnetic 180°Swivel Hook 1
(D) 450 Lumen
Ultra Slim
Inspection Light
(A) 500 Lumen
Flashlight
(B) Charging Unit (E) USB
Cord
(C) 3.7V
18650 Li-Ion
Battery
To Charge:
Plug USB Cord into body
(F) Magnetic 180°
Swivel Hook

4
Operating Instructions and Parts Manual 24607
09/16
2016 OEMTOOLS®
PRO RECHARGEABLE FLASHLIGHT
WITH DUAL FUNCTION LED AND
UV INSPECTION LIGHT
CONTACT US
OEMTOOLS®LIMITED LIFETIME WARRANTY
Please read the following carefully.
If for as long as you own this OEMTOOLS®product you find any defect in material or workmanship, through normal usage, return it to the place
of purchase, or to OEMTOOLS®for repair or replacement at our discretion. In order to obtain this service send your tool and proof of purchase,
transportation pre-paid, to OEMTOOLS®Q.A. Dept, 3850 Raines Road #3, Memphis, TN 38118. We will not be responsible for lost or damaged
goods during transportation, please insure your package. If our inspection verifies the defect, we will either repair or replace the product at our
election, or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired
products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then
you must bear the cost of returning the product.
OEMTOOLS®does not provide warranty for products labeled other than OEM®or OEMTOOLS®. OEMTOOLS®will not provide any warranty
for products subjected to abnormal use. Abnormal use includes, but is not limited to, abuse, accident, alteration, neglect, and unauthorized or
unreasonable use or repairs. This warranty does not cover bits, blades, files, batteries, or calibration. We recommend that you maintain your tools
and sharpen or replace blades, bits, files, and batteries as necessary. OEMTOOLS®reserves the right to makes any changes in construction or
design at any time without any obligation in incorporating such changes to tools or equipment previously sold.
OEMTOOLS®makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that
this product is free from defects in materials and workmanship for the duration of this warranty from the date of purchase. This warranty does not
apply to damage due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,
improper installation, normal wear and tear or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising
from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS. This warranty gives you specific legal rights, and you may also have other rights, which vary
from state to state.
Don’t forget to register your new OEMTOOLS®product at www.oem-tools.com.
3580 E. Raines Road, Suite 3, Memphis, TN 38118
Tel: [phone]
www.oem-tools.com