OFD-PA EHDF-manual User manual

Ergo-Rise
Manual Height Adjustable Sit/Stand Desk
Product Code: EHDF-manual
Copyright BuyDirectOnline 2015. All Rights Reserved.
TM
Quick Visual Assembly Guide

1. Unpack all parts out of the box and remove protective bubble wrapping. Layout the parts prior to assembly.
2. Place both legs to face forward with
brackets for modesty panel facing inwards.
Ergo-Rise Manual Height Adjustable Sit/Stand Desk
Quick Visual Assembly Guide

3. Attach two sides together using the cable tray.
4. Bring the tray to the leg and line up
screw holes. Secure one side.
Leave the other leg off for now.
TM

5. When you assemble one side you can rest the cable tray on another desk for stability while you install the height
adjustment bar.
6. Undo height adjustment bar cap. When loosened it will be easy to
pull out expendable portion.
7. Keep pulling the bar until it is
half way between mechanism
and table leg side.
8. Rotate clockwise to tighten
height adjustment bar.

9. Attach the second leg while threading height
adjustment bar in to leg adjustment mechanism.
Ensure both legs are adequately tightened.
10. Thread height adjustment bar in to second leg height adjustment mechanism.
11. Make sure to thread through leg mechanism. 12. Tighten to secure height adjustment mechanism
TM

13. Attach modesty panel to table legs.
Place modesty panel on one modesty
panel tab and with opposite hand extend
the panel until it meets the opposite tab.
14. Screws are attached from reverse side.
(left image with arrows)
15. Choose a side for the height adjustable
handle on either right or left side.
16. Which ever side is chosen you
need to have height adjustment handle
support brackets there. Use the guide
below if they need to be moved or replaced.
Handle Bracket Detachment Step by Step

17. Thread handle through two brackets and attach handle locking piece. Use a Phillips head screw driver to loosen
or tighten locking piece as needed to adjust retractable handle length as required.
18. (below) Retractable handle
locked with short conguration.
19. (Left) Attach second locking piece
that is closer to leg mechanism.
This stops the handle from being pulled
out while staying retractable.
TM
PLEASE NOTE
Handle may come tted.

Short handle conguration.
Attaching aTableTop
Easiest way to attach the table top
is to turn Ergo-Rise frame upside down.
Note
If you are unable to rotated the table
without wobbling the frame you will
need assitance.
Now you can secure the frame to the top using
self-tapping wood screws. Center frame to
table top with same gap on each end it can be
secured.
IMPORTANT
Observe handle. It needs to clear the table top
when extended to be functional. If it can’t clear
the table top it won’t be able to be adjusted.
Long handle conguration. Long handle retracted.
Assembly Complete!
Copyright BuyDirectOnline 2015. All Rights Reserved.
TM