OfficeSource PL231LD User manual

1 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
COMPONENTS
HARDWARE
MODEL: PL 2013LD
ASSEMBLY INSTRUCTIONS
A B
PL231
PL231LD
2
833
L-Braket
1 Pc
43
Screw
#3.5 x 12mm
2 Pcs
Metal Scallop
Shape Handle
2 Sets
1 5
0' Compo
Door Hingers
2 Pcs Digital Lock Set
1 Sets
AB
®
Last Updated: 02/2021
MODEL NO. PL231LD
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023

2 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION:
MODEL: PL 2013LD
ASSEMBLY INSTRUCTIONS
2 OF 2
! ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
3
2
DETAIL x-x
ADJUST THIS SCREW FOR DOOR ALIGNMENT
AFTER ASSEMBLY THE HINGES.
BACK VIEW
DOOR HINGERS INSTRUCTIONS
4
1
Attach the Hinges (4) to
Door Panel(A) as shown.
Attach the L-Bracket (2)
with Screw(3) as shown.
Attach the Hinges (4) to
PL231(B) as shown.
1
Attach the
Handle(1) as
shown.
2 3
4 5
Attach the Lock Set (5) to
Door (A) as shown.
A
BA
B
A
BA
BA
A
B
A
4
4
5
5
Connect power supply
cord to lock as shown.
Attach cover and
battery holder as
shown.
Insert batteries and
cover it as shown.
Please refer lock
manual for futher setup
A
®
Last Updated: 02/2021
MODEL NO. PL231LD
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023