OfficeSource PL213 User manual

OFFICE FURNITURE
MODEL NO. PL213
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
MODEL: PL213
1 of 2.
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
A B C D E F
1 2 3
M4 x 65
Allen-Key
1 Pc
Adjustable
Glide
4 Pcs
4 5 6
Klix Cam
12 Pcs
Housing
Cap (Short)
12 Pcs
Cam Lock
12 Pcs
Shelf Support
Pin Small
4 Pcs
7
Side Panel L Top Rail Back Rail X 2Pcs Door PanelBottom Rail
G
8
Side Panel R
DETAIL x-x
ADJUST THIS SCREW FOR DOOR ALIGNMENT
AFTER ASSEMBLY THE HINGES.
BACK VIEW
HINGES INSTRUCTIONS
A
B
C
E
G
G
Bottom Panel
0' Compo
Door Hingers
4 Pcs
Metal Scallop
Shape Handle
2 Sets
9
JCBC Screw
M6 x 40mm = 8pcs
14Washer = 8pcs
PL214
(SOLD SEPERATELY)
I
+
Insert the cam with the arrow
pointing towards the hole in
the edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
MODEL: PL213
1 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
HARDWARE
COMPONENTS
KLIX CAM INSTRUCTIONS
I
Adjustable
Shelf Panel
H
®

OFFICE FURNITURE
MODEL NO. PL213
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
MODEL: PL213
2 of 2.
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
Attach Side Panels (A) to
assembled part with Cam
Lock (1) and Klix Cam (2).
Attach Bottom Panel (D),Bottom
Rail(E),Back Rail(G) & Top
Panel(A) to Side Panel(B) with
Cam Lock (1) and Klix Cam (2).
D
A
G
E
BB
AE
A
G
A
Screw Adjustable
Glides (5) into Side
Panel(A)&(B).
5
2 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION:
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
1 2
3
MODEL: PL213
C
G
I
9
4
Attach PL213 to
PL214(I) by usingJCBC
Screw & Flat
Washer(9).
A
B
G
E
D
F
H
6
A
7Attach Support
Pin(6) then
insert Shelf(H)
as shown.
B&
Attach Handle
with Screw(7)
to Door(G).
7
G
INSTRUCTIONS:
®