Offshore Angler Sea Lion SLS50 User manual

SLS50, SLS60, SLS70, SLS80
Congratulations on your purchase of an Offshore Angler™ Sea Lion™
spinning reel. This reel is the ultimate tool in landing that trophy game sh.
Sea Lion Reel Specifications
Gear Weight Max Drag Inches Line Cap.
Model Bearings Ratio (oz.) (lbs.) Per Turn Mono/Braid(lbs./yds.)
SLS50 5 (4+1) 4.9:1 14.5 35 34"12/240, 14/220, 17/170
50/210, 65/170, 80/130
SLS60 5 (4+1) 4.9:1 14.5 35 37"14/255, 17/230, 20/190
65/230, 80/190, 100/150
SLS70 5 (4+1) 4.6:1 25 40 37"25/240, 30/210, 40/135
80/260, 100/230, 150/195
SLS80 5 (4+1) 4.6:1 25.5 40 41"30/270, 40/180, 50/140
80/305, 100/250, 150/230
Graphite Frame and Rotor
The frame and rotor were designed to be lightweight, durable, and
corrosion resistant.
Powerlock™ Instant Anti-Reverse
Your reel is equipped with our Powerlock instant anti-reverse system.
This is a special type of bearing that allows the handle to only turn
forward. There is no play in the handle so you have complete control
during the retrieve and no “loose” feeling, which is important during
stop-and-go retrieves.
Machined–Aluminum Handle
Your reel comes equipped with an exceptionally strong
machined-aluminum handle for peak durability.
Double-Anodized Spool
The spool has been double-anodized to provide years of corrosion
resistance.
Front Drag
Your reel is equipped with a drag system to help you ght stronger,
faster sh without the risk of breaking your line. The drag can be
adjusted by turning the knob on the front side or spool end of the reel.
To properly set the drag, you will need a spring scale. Your drag should
be set at 25% of the test rating of your line. Tie a loop in the end of your
main line. Run it through the guides of your rod and attach it to the hook
on the scale. Pull the scale until it registers 25% of the line rating. If you
are using 12 lb. test, then you should set your drag to start slipping
at 3 lbs.
Reel Care and Lubrication
Your new reel is designed to provide years of dependable service. But
like any other precision machine, periodic cleaning and maintenance is
required for continued peak performance.
Reels made today require both a lightweight oil and grease. Oil and
grease should be used sparingly; too much can have a negative impact
on reel performance. There are lightweight oils and grease made
specically for shing reels that can be found at basspro.com.
As a rule of thumb, oils should be used to lubricate any moving part on
the reel, e.g. ball bearings, bushings, handle joints, bail springs, etc.
Grease should be used to lubricate the main drive gear and pinion gear.
We do not recommend using any multipurpose oils. Many of these oils
have properties that will attract dirt and dust to the internal parts. This
may cause excessive wear and reduce the life of the reel.
After each trip, the reel should be checked for dirt or sand. If it has been
exposed to saltwater, the spool should be removed and the entire reel
rinsed in freshwater. Dry with a soft cloth and lubricate the reel as
described above.
For professional cleaning and maintenance,
send your reel postage prepaid to:
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springeld, MO 65803
Phone: [phone] Fax: [phone]
Bass Pro Shops®Fishing Reels
Limited Warranty
Bass Pro Shops will repair or replace (at our discretion) any Offshore
Angler reel which proves to be defective in workmanship or materials
within one year from the original date of purchase. You must save your
dated sales receipt for warranty validation. This warranty gives you
specic legal rights, and you may have other rights which vary from
state to state or province to province.
For reels purchased through our catalogs or Bass Pro Shops
online:
• For reel replacement only: Return your reel postage prepaid with
your dated sales receipt to the Return Center address listed on your
receipt.
• For reel repair only: Return your reel postage prepaid with a copy of
your dated sales receipt as proof of purchase and warranty validation
to the Outdoor World Rod & Reel Repair®address below.
For reels purchased through Bass Pro Shops retail locations:
• For reel replacement only: Return your reel (postage prepaid if
sending by mail) along with your dated sales receipt to the store from
which it was purchased.
• For reel repair only: Return your reel postage prepaid with a copy of
your dated sales receipt as proof of purchase and warranty validation
to the Outdoor World Rod & Reel Repair address below.
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due
to abuse, accidents, or normal wear. Failure to clean, lubricate, and
provide reasonable and necessary maintenance will void the warranty.
Repairs needed to your reel due to abnormal use or modication, or
after warranty expiration, are available for a reasonable charge from
Outdoor World Rod & Reel Repair, providing the reel is returned
postage prepaid.
Except to the extent prohibited by applicable law, there are no
warranties or conditions, express or implied, other than those expressly
set out herein. Bass Pro Shops shall not, under any circumstances, be
liable for an amount greater than the actual purchase price of the
product nor for any special, incidental, or consequential damages
suffered or incurred in connection with the product and Bass Pro
Shops does not assume, and does not authorize any person to assume
for it, any obligation or liability other than those expressly set out herein.
Made in China. basspro.com
BP151677

1 DRAG SPOOL ASSEMBLY
2 SPOOL SHAFT
3 MAIN SHAFT WASHER
4 CLICK RATCHET
5 MAIN SHAFT ASSEMBLY
6 SCREW
7 BAIL ASSEMBLY
8 LINE ROLLER BUSHING
9 LINE ROLLER
10 LINE ROLLER WASHER
11 LINE ROLLER WASHER
12 BAIL BRACKET
13 SCREW
14 SCREW
15 BAIL ARM COVER
16 TRIPLINK
17 SLIDER SPRING
18 SPRING HOLDER
19 BAIL TRIP WIRE
20 SCREW
21 LOCK WASHER
22 NUT
23 PICKUP HOUSING
24 TRIP BRACKET COVER
25 SPACER
26 SCREW (X3)
27 BEARING COVER
28 ONE-WAY CLUTCH COVER
29 BALL BEARING
30 BEARING HOLDER
31 SPACER (X2 ON SLS70, SLS80)
32 WASHER (X2)
33 ONE-WAY CLUTCH ASSEMBLY
34 BALL BEARING
35 PINION
36 SCREW
37 N-R PAWL
38 N-R SPRING
39 N-R STEM
40 N-R SPRING
41 SCREW
42 N-R LEVER
43 FRAME
44 HANDLE LOCK SCREW ASSEMBLY
45 WASHER
46 REAR COVER
47 SCREW
48 BUSHING
49 LEVEL WIND GEAR
50 LEVEL WIND GEAR COVER
51 SCREW
52 LEVEL WIND BRACKET
53 E-WASHER
54 BUSHING
55 SCREW
56 LWB PLATE
57 SCREW
58 DRIVE GEAR
59 WASHER
60 BALL BEARING (X2)
61 COVER SEAL RING
62 COVER
63 SCREW
64 SCREW (X3)
65 CRANK ASSEMBLY
70 SCREW
71 WASHER
72 BUSHING (X2)
73 SEAL RING (X2)
74 SCREW
75 WASHER
76 SPACER
SEA LION SPINNING REEL: SLS50, SLS60, SLS70, SLS80
NO. PART NAME