Offshore Angler Seafire SF9/0 User manual

Congratulations on your purchase of an Offshore Angler™ Seare
conventional reel. This reel was manufactured with the highest quality
components and has been extensively tested to ensure that your day on the
water is more productive. Please take a moment to familiarize yourself with
the performance-enhancing features of this reel before use. This will help
you optimize the reel’s settings and increase your odds of success. We
wish you the best of luck in your future angling adventures!
Reel Specifications
Weight Max Line Capacity
Model Bearings (oz.) Drag(lbs.) mono/braid (lb./yds.) IPT Gear Ratio
SF9/0 448 44 50/700, 60/625, 80/475 30.3" 2.55:1
65/1870, 80/1700, 100/1450
• 1-pc. CNC-Machined-Aluminum Frame
• Double-Anodized Machine-Cut Spool
• 4 Double-Sealed Stainless Steel Ball Bearings
• Low-Profile Audible Bait Clicker
• Powerful Star Drag System
Features and Operations Instructions
Rugged CNC-machined-aluminum frame
The frame of this reel was CNC-machined from solid aluminum bar
stock. It is extremely strong and will not ex under load. It has been treated
to prevent corrosion.
4 double-sealed stainless steel ball bearings
We used double-sealed stainless steel ball bearings in key locations
throughout the Seare reel. These bearings are designed to withstand
corrosion and keep debris out so your reel functions smoothly.
Low-profile audible bait clicker
The bait clicker is located on the palming sidecover. It can be turned on
by sliding the button downward.
Powerful star drag system
The Seare reel is equipped with a star drag system. It is located under
the handle on the right side of the reel. Drag power is increased as the star
is rotated forward.
Offset power handle
The Seare reel includes an adjustable offset power handle with a
comfortable egg-shaped knob. The handle has been anodized to protect
against corrosion.
Bass Pro Shops®Fishing Reels:
Limited Warranty
Bass Pro Shops will repair or replace (at our discretion) any Offshore Angler reel
which proves to be defective in workmanship or materials within one year from the
original date of purchase. You must save your dated sales receipt for warranty
validation. This warranty gives you specic legal rights, and you may have other
rights which vary from state to state or province to province.
For reels purchased through Bass Pro Shops catalogs or
Bass Pro Shops online:
• For reel replacement only: Return your reel postage prepaid with your dated
sales receipt to the Return Center address listed on your receipt.
• For reel repair only: Return your reel postage prepaid with a copy of your dated
sales receipt as proof of purchase and warranty validation to the Outdoor World
Rod & Reel Repair®address below.
For reels purchased through Bass Pro Shops retail locations:
• For reel replacement only: Return your reel (postage prepaid if sending by
mail) along with your dated sales receipt to the store from which it was
purchased.
• For reel repair only: Return your reel postage prepaid with a copy of your dated
sales receipt as proof of purchase and warranty validation to the Outdoor World
Rod & Reel Repair address below.
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due to abuse,
accidents, or normal wear. Failure to clean, lubricate, and provide reasonable and
necessary maintenance will void the warranty. Repairs needed to your reel due to
abnormal use or modication, or after warranty expiration, are available for a
reasonable charge from Outdoor World Rod & Reel Repair, providing the reel is
returned postage paid.
Except to the extent prohibited by applicable law, there are no warranties or
conditions, express or implied, other than those expressly set out herein. Bass Pro
Shops shall not, under any circumstances, be liable for an amount greater than the
actual purchase price of the product nor for any special, incidental, or
consequential damages suffered or incurred in connection with the product and
Bass Pro Shops does not assume, and does not authorize any person to assume
for it, any obligation or liability other than those expressly set out herein.
Reel Care And Lubrication
Your new reel is designed to provide years of dependable service. But like any
other precision machine, periodic cleaning and maintenance is required for
continued peak performance.
Reels made today require both a lightweight oil and grease. Oil and grease should
be used sparingly; too much can have a negative impact on reel performance.
There are lightweight oils and greases made specically for shing reels that can
be found at basspro.com
As a rule of thumb, oils should be used to lubricate any moving part on the reel,
e.g. ball bearings, bushings, handle joints, bail springs, etc. Grease should be used
to lubricate the main drive gear and pinion gear.
We do not recommend using any multipurpose oils. Many of these oils have
properties that will attract dirt and dust to the internal parts. This may cause
excessive wear and reduce the life of the reel.
After each trip, the reel should be checked for dirt or sand. If it has been exposed
to saltwater, the spool should be removed and the entire reel rinsed in freshwater.
Dry with a soft cloth and lubricate the reel as described above.
Wash reel thoroughly after each use with warm, fresh water.
Loosen the star drag when not in use to extend the drag washer's life.
CONVENTIONAL REEL
SF9/0
BP171531
仅供观看(only for viewing)
勿打印 (do not print)

1 LEFT SIDE PLATE
2 NAME PLATE
3 SCREW x2
4 CLICK PAWL STUD
5 CLICK PAWL
6 E-WASHER
7 CLICK SPRING
8 SCREW
9 LEFT BEARING HOLDER
10 O-RING
11 BUSHING STOPPER
12 BALL BEARING
13 LEFT EXTERNAL RING
14 HARNESS LUG
15 SCREW x8
16 FRAME ASSEMBLY
17 SPOOL SUB ASSEMBLY
18 CLICK RATCHET
19 E WASHER
20 RIGHT SIDE PLATE
21 RIGHT BEARING HOLDER
22 RUBBER WASHER
23 SPOOL SHIM
24 BALL BEARING
25 PLATE SUB ASSEMBLY
26 GEAR STEM
27 WASHER
28 E-WASHER
29 WASHER
30 MAIN GEAR
31 DRAG WASHER x7
32 KEYED DRAG WASHER x4
33 EARED DRAG WASHER x3
34 SPRING WASHER x2
35 N-R PAWL
36 N-R PAWL SPRING
37 SCREW x4
38 PINION YOKE ASSEMBLY
39 PINION YOKE SPRING
40 PINION ASSEMBLY
41 DRIVE LEVER
42 SPACER
43 LOCK WASHER
44 CAM
45 CAM SPRING
46 SCREW
47 RIGHT EXTERNAL RING
48 SPACER
49 BALL BEARING
50 DRAG SPACER
51 TENSION WASHER
52 STAR DRAG
53 CRANK ARM WASHER
54 CRANK SUB ASSEMBLY
55 CRANK HANDLE
56 BALL BEARING
57 SCREW
58 PLUG
59 HANDLE NUT
60 HANDLE NUT LOCKER
61 SCREW
62 REEL HOLDER
63 SCREW
64 LOCK NUT
65 SCREW
66 SCREW DRIVER
67 ROD RETAINER
68 RUBBER WASHER
69 HOOK ASSEMBLY x2
NO. PART NAME
SEA FIRE SF9/0
y
x
x
57
1
2
3
4
5
6
7
8
910
11
13
14
15
16
17
18
19
20
12
14
15
15
21
22
23
24
25
26
28
29 30
27
31
32
33
34
35
36
38 39
40
33
33
37
41
42
43
44
45
46
47
48
49
50
52
53
54
55
56
58
59
60
61
62
63
64
65
51
66
67
68
69
仅供观看(only for viewing)
勿打印 (do not print)