Ofita BOSSA Operating manual

information for the user
bossa
i ofita design i

Synchronised movement mechanism for the
seat and backrest. With backrest blocking in
five positions (a) and tension adjustment (b).
It is also fitted with a non-return backrest
system.
Turn the regulator (b) left or right for softer or
harder tension.
+
-
(b)
(a)
synchro mechanism

adjustment of the backrest
blocking
It is activated with the lever on the left (a).
Downwards, it blocks the inclination of the
backrest. Upwards, it allows the user to lean
freely.
Non-return function: to unblock it, in addition
to pulling the lever upwards, the user must
lean on the backrest.
(a)

Adjustable lumbar support in eleven positions
to suit the lumbar area to the anatomical
features of each user.
Activated manually.
lumbar support
adjustment

adjustment of the seat
height
Pull the lever (c) to adjust the height of the
seat to your own height.
This lever controls the gas cylinder to raise or
lower the seat. Lift it to activate it, removing
your weight on the seat to raise it and
remaining seated to lower it.
(c)

Adjustable seat depth (*) to guarantee comfort
and ergonomics for everyone, regardless of
their height.
The depth of the seat is adjusted by pushing
the lever (d) on the right of the seat
downwards.
adjustment of the seat
depth
(d) (d)
(*) Adjustment available depending on the model.

adjustments of armrests
Height adjustment (r1):
press the button that is right under the
cover at the outside of the armrest.
Angle adjustment (r2)*:
intuitive, turn the cover.
Depth adjustment (r3)*:
intuitive, slide the cover.
(r3)*
(r2)*
(r1)
(r1)
(r1)
3d armrest 1d armrest
(*) Adjustment available in 3D armrest.

Customer Service
[phone]
co[email protected]om
www.ofita.com