Okina WDSDX-M56AI Quick start guide

OPERATIONAL MANUAL
Wide Dynamic Range Dome Camera
with OSD Multi-function
1/3” Sony Vertical Double-density Interline CCD
3D DNR Function
This is a high resolution, multi-functional and super low illuminated WDR dome camera.
It adopts the new WDR DSP and can display the foreground and background with clarity
even under high-contrast circumstances.
Please read the Operational Manual before attempting to use this product.
WDSDX-M56AI
WDSDX-M56AIP

Copyright 2010. All Rights Reserved. 2 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
CONTENTS
1. Features ………………………………………………….…….………….…… 2
2. Dimension ……………………………………………………………………… 2
3. WDR Function …………………………………………………….…………… 3
4. Installation …………………………………………………………….…..…… 4
5. Menu Operation ………………………………………………………….…… 5-8
6. Specification ………………………………………………………….……..… 9
7. Package Contents …….…………………………………………...………… 10
8. Caution ………………………………………………………………………… 10-11
9. Warranty ……………………………………………………………….……… 11
1. FEATURES
z1/3” Sony Vertical Double-density Interline CCD
z560 TV Lines – Color / 620 TV Lines – B&W
z3.7mm~12.0mm Aspherical Vari-focal Auto Iris Lens / F1.4
Made by Tamron
zIR Cut Filter
z3D DNR Function
zSuper Low Illumination
zSens-up Function: improve the effect under low illumination at night
z0.2 lux @ F1.2 – Color Mode
0.05 Lux @ F1.2 – B/W Mode
0.0002 Lux @ F1.2 – Sens-up Mode
zParameters for high light area and dark area can be adjusted separately
zOSD Menu
zPrivacy Zone Masking Function
zShutter Speed Adjustable from 1/50 to 1/90000 sec
z12V DC
2. DIMENSION

Copyright 2010. All Rights Reserved. 3 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
3. WDR FUNCION
WDR FUNCTION SETTINGS
Enter the menu (EXPOSURE→ALC→WDR SETUP)
WDR →SETUP
WDR LONG 0……｜……PRESS "LEFT" OR "RIGHT" FOR OPTION 0~+100
SHORT 0……｜……PRESS "LEFT" OR "RIGHT" FOR OPTION 0~+100
EXIT RET TOP /END
1. 12V DC Power Input
2. Video Output Port
3. OSD Control
3

Copyright 2010. All Rights Reserved. 4 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
LONG (Adjust to enhance brightness in dark area)
SHORT (Adjust to reduce brightness in high light area)
Displayed image can reach its best effect through adjusting WDR menu options according to
various circumstances.
4. INSTALLATION
Step 1: Fix the ceiling plate to the ceiling
with screws provided.
Step 2: Pull the cable through the center
hole on the installation board.
Step 3: Twist and lock the vandal
resistant dome on the ceiling.
Step 4: A) Adjust lens angle and focus.
Camera board mounted in 3-Axis
Gymbal. B) Locking the fixed screw in
case it dismount easily.
Step 5: Attach bubble cover.
，

Copyright 2010. All Rights Reserved. 5 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
5. MENU OPERATION
CAMERA ID OFF PRESS "LEFT" OR "RIGHT" FOR OPTION 1~255 ID
EXPOSURE ALC PRESS "LEFT" OR "RIGHT" FOR OPTION ALC & ELC
WHITE BAL ATW PRESS "LEFT" OR "RIGHT" FOR OPTION AWC & MANUAL
DAY/NIGHT AUTO PRESS "LEFT" OR "RIGHT" FOR OPTION EXT&DAY&NIGHT
MOTION DET OFF PRESS "LEFT" OR "RIGHT" FOR OPTION ON
3D-DNR MIDDLE PRESS "LEFT" OR "RIGHT" FOR OPTION HIGH&LOW&OFF
PRIVACY OFF PRESS "LEFT" OR "RIGHT" FOR OPTION ON
SPECIAL
RESET
EXIT
EXPOSURE-ALC/ELC
WDR/BLC/HSBLC OFF PRESS "LEFT" OR "RIGHT" FOR OPTION
BRIGHTNESS 50……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 0~100
AGC MIDDLE PRESS "LEFT" OR "RIGHT" FOR OPTION
HIGH&LOW&OFF
SHUTTER AUTO PRESS "LEFT" OR "RIGHT" FOR OPTION OFF
A.FLK & 1/60~1/90000
SENS-UP AUTO PRESS"LEFT" OR "RIGHT" FOR OPTION OFF& X2~X128
EXIT RET TOP /END

Copyright 2010. All Rights Reserved. 6 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
EXPOSURE-WDR/BLC/HSBLC
WDR LONG 0……｜……PRESS "LEFT" OR "RIGHT" FOR OPTION
0~+100
SHORT 0……｜……PRESS "LEFT" OR "RIGHT" FOR OPTION
0~+100
BLC LIMIT PRESS "LEFT" OR "RIGHT" FOR OPTION
HIGH&LOW&MIDDLE
HSBLC AREA SETTING
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
GRAY SCALE GRAY PRESS "LEFT" OR "RIGHT" FOR OPTION D.GRAY&BLACK
USE SCALE 0……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 0~5
MASK OFF PRESS "LEFT" OR "RIGHT" FOR OPTION ON
EXIT RET TOP /END
WHITE BAL
COLOR TEMP INDOOR PRESS "LEFT" OR "RIGHT" FOR OPTION OUTDOOR
RED 0……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION -100~+100
BLUE 0……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION -100~+100
EXIT RET TOP /END
DAY/NIGHT
LEVEL MIDDLE PRESS "LEFT" OR "RIGHT" FOR OPTION LOW/MIDDLE/HIGH
DWELL TIME 5SEC PRESS "LEFT" OR "RIGHT" FOR OPTION
10SEC/15SEC/30SEC/60SEC

Copyright 2010. All Rights Reserved. 7 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
EXIT RET TOP /END
MOTION DET
ZONE NUMER AREA1 PRESS "LEFT" OR "RIGHT" FOR OPTION AREA2/AREA3/AREA4
ZONE STATE OFF PRESS "LEFT" OR "RIGHT" FOR OPTION ON
HEIGHT 40……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 12~100
WIDTH 40……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 16~100
MOVE Y 50……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 6~94
MOVE X 50……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 8~92
SENSITIVITY 50……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 0~100
EXIT RET TOP /END
PRIVACY
ZONE NUMER AREA1 PRESS "LEFT" OR "RIGHT" FOR OPTION AREA1~8
DISPLAY OFF PRESS "LEFT" OR "RIGHT" FOR OPTION ON
COLOR GRAY PRESS "LEFT" OR "RIGHT" FOR OPTION BLACK/WHITE
HEIGHT 40……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 20~80
WIDTH 40……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 20~80
MOVE Y 50……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 20~80
MOVE X 50……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 2~98
EXIT RET TOP /END
SPECIAL
D-ZOOM OFF PRESS "LEFT" OR "RIGHT" FOR OPTION ON
D-EFFECT OFF PRESS "LEFT" OR "RIGHT" FOR OPTION
V-FLIP/MIRROR/ROTATE
SHARPNESS 34……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION 0~68
STABILIZER OFF PRESS "LEFT" OR "RIGHT" FOR OPTION ON
COLOR ON PRESS "LEFT" OR "RIGHT" FOR OPTION OFF(B/W)
SYNC INT
USER TITLE OFF PRESS "LEFT" OR "RIGHT" FOR OPTION ON

Copyright 2010. All Rights Reserved. 8 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
LANGUAGE ENG PRESS "LEFT" OR "RIGHT" FOR OPTION ENG/中文
EXIT RET TOP /END
SPECIAL →DIGITAL ZOOM
ZOOM x1.1……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION x1.1~x8.0
PAN 0……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION -100~+100
TILT 0……｜…… PRESS "LEFT" OR "RIGHT" FOR OPTION -100~+100
EXIT RET TOP /END
SPECIAL →USER TITLE
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz CLR: END：POS:
-.0123456789
←→CLR POS END POS：←→↑↓ MOVE&PRESS SET KEY
RESET
CAMERA REBOOT
FACTORY RESET
COMMUNICATION
EXIT RET TOP /END

Copyright 2010. All Rights Reserved. 9 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
6. SPECIFICATION
Model WDSDX-M56AI WDSDX-M56AIP
Sensor 1/3” Sony Vertical Double-density Interline CCD
Resolution 560 TV Lines – Color / 620 TV Lines – B&W, signal enhancement
Line Scan Frequency 15.734 kHz 15.625 kHz
Filed Scan
Frequency 59.95 Hz 50 Hz
Effective Pixels 768(H) x 494(V) 752(H) x 582(V)
Electronic Shutter 1/60~1/90,000 sec 1/50~1/90,000 sec
Scan Mode 2:1 Interlace
Video Signal 1.0Vp-p 75 Ω, Video 0.714Vp-p / Composite 0.286Vp-p
Illumination
0.2 lux @ F1.2 – Color Mode
0.05 Lux @ F1.2 – B&W Mode
0.0002 Lux @ F1.2 – Sens-up Mode
S/N Ratio 54dB min. (AGC Off)
Iris Control DC Auto Iris (shutter speed 1/50~1/90,000) / ELC
AWB Indoor / Outdoor / Manual Modes
WDR On / Off
Sync Mode Int. / Ext. 2 modes
Privacy Masking On / Off (8 areas for option)
Motion Detect On / Off (4 areas for option)
Mirror Off / H-Mirror / V-Mirror / Rotation for option
AGC Off / Low / Middle / High Optional

Copyright 2010. All Rights Reserved. 10 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
Sens-up Off / 1x~128x
D/N Mode Auto / Day / Night / Ext. Control for option
D-Zoom 1x ~ 8x
Lens 3.7mm~12.0mm Aspherical Vari-focal Auto Iris Lens / F1.4
Made by Tamron
Power Supply 12V DC
Power Consumption 183mA / 2.2W
Operation
Temperature 14°F ~ 122°F / -10°C ~ 50°C
Storage Temperature -40°F ~ 140°F / -40°C ~ 60°C
Humidity 20% ~ 90% RH
Dimension 5.43”(D) x 3.94”(H) / 138mm(D) x 100mm(H)
Weight 0.79 lbs / 360g
*Specifications are subject to change without notice.
7. PACKAGE CONTENTS
One (1)
WDSDX-M56AI or
WDSDX-M56AIP Camera
One (1) Mounting Plate
Four (4) Mounting Screws

Copyright 2010. All Rights Reserved. 11 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
Four (4) Wall Anchors One (1) Mounting Sticker
Template
One (1) Operational
Manual
*For any returns, please include all components listed above with original packaging in
Resalable Condition. Absolutely No Returns will be accepted if any component is
missing/damaged or if any cable is cut or tampered with.
\
8. CAUTION
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the pick-up
device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.
3. Requires a proper operating environment
This camera is designed for outdoor or indoor use. The allowable temperature range for
operation of this camera is between 14°F ~ 122°F / -10°C ~ 50°C. Keep the camera away from
damp or rainy places, and install strictly as per the manual.
4. Clean the front face to the pick-up device
It is recommended that the pick-up device surface be cleaned before lens installation or
whenever the lens is changed. Cleaning should be done by using a chamois, a very fine soft
cloth, lens tissue, or cotton tipped applicator and ethanol to carefully remove any fingerprint or
dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet the
specifications). Camera must be connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of
short out parts that could result in a fire or electric shock. Never spill any kind of liquid on the
video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all service to qualified servicing
personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel

Copyright 2010. All Rights Reserved. 12 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224
under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been dropped or the cabinet has been damaged.
d. When the video product exhibits a distinct change in performance.
9. WARRANTY
OKINA USA products are covered under warranty for one year from the date of purchase. The
warranty will automatically be voided if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information regarding when
and where the product was purchased. We have no other way to verify the purchase record
without the serial number on the camera sticker; therefore, it should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this manual, the
warranty will be voided immediately. It is the customer’s responsibility to keep the camera in
good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the
cables will result in termination of the warranty.

Copyright 2010. All Rights Reserved. 13 P = PAL version. REV081010.
www.okinausa.com WDSDX-M56AI_D-224