Okina SP27HB-V55DN User manual

OKINA
High Speed Dome
Camera Series
USER MANUAL
SP27HB-V55DN
SP37HB-V55DN
v2.61

CONTENTS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.
FCC COMPLIANCE STATEMENT
CE COMPLIANCE STATEMENT
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS‘S AUTHORITY TO OPERATE THE
EQUIPMENT.
FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE
LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMI TS ARE DESIGNED TO PROVIDE REAS ONABLE PROTECTION AGAI NST HARMFUL
INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT
INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A
RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER
WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
WARNING: THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE
REQUIRED TO TAKE ADEQUATE MEASURES.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER ( OR BACK). NO
USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying this unit.
WARNING
CAUTION: BEFORE ATTEMPTING TO CONNECT OR OPERATE THIS PRODUCT, PLEASE
READ THE LABEL ON THE BOTTOM AND USER'S MANUAL CAREFULLY
1. Precaution......................................................1
2. Features.........................................................2
3. Packing list.....................................................3
4. Installation...................................................... 4
5. Operation........................................................10
6. OSD................................................................11
7. Adress and Protocol Setting...............................19
8. Specifications..................................................23
Technical specification are subjects to change without
prior notice. Manual may contain mistake or print error.
All trademarks mentioned belong to their respective owners.

1.PRECAUTION
Refer all work related to the installaion of this product to qualified service
personnel or system installers.
Do not attemp to disassemble the appliance
To prevent electric shock, do not remove screws or cover. There are no user-
serviceable parts inside. Contact qualified service personnel for maintenance
Handle the appliance with Care
Do not strike or shake, as this may damage the appliance. It should be protected
against extreme pressure, vibration and humidity during transportation and storage.
Damages caused by improper transportation avoid the warranty.
Do not use strong or abrasive detergents when cleaning the appliance body and
transparent cover.
Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove,
use a mild detergent and wipe gently.
Do not operate the apliance beyond its specified temperature, humidity or power
source ratings.
Do not use the dome camera in an extreme environment where high temperature or
high humidity exists.
Use the indoor models within -10°C to +50°C(14°F to 122°F) and a humidity below
90%. The input power source is 24V AC, 50/60Hz and requires 1000mA.
Use the outdoor models within -20°C to +60°C(-4°F to 140°F) and a humidity below
90%. The input power source is 24V AC, 50/60Hz and requires 2500mA.
Do not expose the indoor model of dome camera to water or moisture, not try to
operate it in wet areas.
Take immediate action when the indoor speed dome becomes wet. Turn off the power
and refer servicing to qulified service personnel. Moisture may damage the appliance
and cause eletric shock.
Do not point the camera lens directly to sunlight or any strong light source.
This will cause permanent damage to the camera and avoids the warranty.
Read this user's manual carefully before operating the appliance.
Make sure that local electric safty standard are followed when using or installing the
appliance
Do not install the camera in other orientation as designed.
And do not bend or squeez the sturctiure, as this may damage the mechanic sturcture
of the appliance and avoids the warranty.
Do not touch the Cover with bare hands or any object.
These will scratch the serface and affect the image qulaity.
2.FEATURES
The high speed dome camera series are designed for in- and outdoor video surveillance
application. The integrated, motorized pan-tilt mechanic allows user to point the camera
to any position( 360° horizontal and 180° vertical). Both series can be equipped with
digital zoom camera modules, which provide zooming functon from 18 to 36 times
(optical) and advanced image features.
Key features:
- 360° Pan and 180° Tilt range (90° with auto-image-flip)
- Support most well-known camera modules
- 128 preset points memory (80 can be used for auto tour function)
- 4 pattern tours
- 1 Scan tour
- Basic setup directly from Keyboard.
- Advanced setup through OSD (On Screen Display) menu.
- up to 24 privacy masking zones ( despends on camera module)
- 7 alarm input & 2 output ( 4 input & 1 output pre-wired)
- Multi-Protocol through Rs485 or coaxial cable.
- Dirction Indicator on screen
- Aluminum Alloy structure with high intensity and heat-sinking
- High-precision step-motor for flicker-less image during movement.
Camera Features:
-HighResolution with 520TVL and Wide-Dynamic*
- Auto-Focus
- Auto-Iris
- Auto- Brightness control,
- Auto-Balance
- IR cutter control, Day-Night mode switching.
- Auto Slow-Shutter
Temperature monitoring and protection
- Alarm notification will be displayed once the inner temperature exceeds the limit
- In low temperature area, the dome camera will only start after the operation
temperature is reached.
- Cooling fan activity is managed by the CPU ( extends the duration)
Other features:
- Proportional pan for Focus / Speed on different zoom factor.
- Auto-resuming user-defined action, such as tour, pattern or scan after selectable idle
time.
- Power-up Action activates tour or pattern by default.
* depends on camera module type.
1 2
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details

3.PACKING LIST
Safety Instructions before starting
- Do not install and operate this appliance in a flammable and explosive environment.
- Make sure that the installation is done according to the local electricity safety regulation
of your country.
.
- Before installation and mentainence, make sure that the appliance is disconnected
from the power source.
- Do not use any power source other than 24V AC, in order to prevent damages to this
device. For details, please refer to the section "Precaution" in previous chapter for
more details.
- Handle the device during the installation carfully. Falls or extreme vibration may cause
irrepairable damages and avoid the warranty.
- Do not install or operate the appliance near any high-voltage devices or high-voltage
cable. The safety distance should remain at least 50 m.
- To archive best image quality, its recommanded to use underground cable shielded with
steel tube. Do not install the cable without any protection.
- In a thunderstorm area or region with high inductive voltage, such as high voltage
transformer stations, it is necessary to use additional lighning-proof equipments or
lightning rob for protection.
- For outdoor installation, lightning-proof and grounding of the device should be
considered. Please refer to the industrial saftey regulation and request of your country
.
- Grounding of the appliance should consider anti-interference and fulfill the saftey
requirements. Do not connect the ground with short-circuited or other high-voltage
electric network.
- The resistance of down conductor should not exceed 4 Ohm, and its thickness should
be at least 25mm²
- This appliance has the lightning-proof function which can prevent damages caused by
high-voltage pulse, such as lightning strike below 1500.
- This appliance meets the Ip66 standard for water and dust proof. Do not install the in-
door model for out-door application which is not designed with water protection. Make
sure that the installation is protected from long-time water-drop or spatter, which may
damage the appliance.
- Make sure that the enviroment of installation meets the requirement of the appliance,
such as holding the weight, enough spaces for bracket and power supply.
4.INSTALLATION
Indoor
Series US ER'S M ANUA L
High S peed do me
Came ra Seri es
Core Unit
1 Piece
Indoor Roof-Mount
base platte
1 piece
Instruction and
operation manual
1 piece
Outdoor
Series
Core Unit
1 Piece
Out-Door housing
with sun.shield and
cover
1 piece
Instruction and
operation manual
1 piece
Spare dome cover
1 piece
Outdoor
Series
Core Unit
1 Piece Out-Door housing
with sun.shield and
cover
1 piece
Instruction and
operation manual
1 piece
Spare dome cover
1 piece
Some models may not be available in your country, please contact VIDO distributor for more details
Unpacking
The speed dome is packed with protection. please take
out the core unit carefully. In case of transportation
please use the original packing box.
WARNING: The transparent cover part is sensitive and should
be handled with care. Do not touch or rub the surface in any way
with the protection foil.Inproper cleaning method will cause
permanent scratches on the cover and cause unclear image or
focusing error of the camera. For Cleaning the cover, please
replace the original first with the spare cover, and wash it by
diving into warm water with non-corrosive cleaning solution.
34
Some products may not be available in your country, please contact our distributor for more details
USE R'S MAN UAL
High S peed do me
Came ra Seri es
USE R'S MAN UAL
High S peed do me
Came ra Seri es

4.INSTALLATION
Connector description
The wiring cable of the PTZ camera provides connectors for power supply, video and
I/O interface
Video output
BNC
Inner Conn: Signal +
Outer Conn: Ground
Video Output to monitor or DVR
Using optional accessories
The speed dome cameras can be connected to various optional accessories through
the standard connector types, which simplifiy the cable handling and avoids possible
mistakes. All accessories are tested for max. compatibility and best performance.
Outdoor power adaptor box
AC 230V to AC 24V
AC 24 Power
supply
RS 485
Alarm I/O
AC 230V
Power input
Indoor power adaptor
AC 230V to AC 24V
AC 230V
Power input
AC 24 Power supply
3-Axis keyboard
controller
RS 485
Telemetric control
camera setup
21”High Res.
security Monitor.
Professional Real-time
16 Channel DVR
Video signal
RS 485 cable
The telemetric control of the appliance uses Rs485 serial communication with half-
duplex transmission technology.
Depends on the cable typeand baud rate, the transmission distance could vary. The
following table shows max. distances based on cable with 0,56mm (24AWG) twisted
pair:
2400 bps
1100 m
700m
4oom
4800 bps
1700m
9600 bps
19200 bps
Baud Rate Max. Distance Due the environmental interferences, such as
eletromagnetic and induction fields, or number of
connected appliance on the RS-485 bus, the
transmission range may be less, e.g with cable thinner
than than 24AWG.
4.INSTALLATION
5 6
Power
Connector
RS485
Connector
RJ-11
Alarm I/O 1
RED: AC 24V
BLACK: AC 24V
To power supply
Green:RS485+
Yellow:RS485-
To Keyboard or DVR decives for
telemetric control
RED: Alarm in 1
PINK: Alarm in 2
YELLOW: Alarm in 3
GREEN: Alarm in 4
BLACK: COM
WHITE: Alarm output - N.O
BLUE: Alarm output - N.C
AQUA: Alarm output - N.C2
BROWN: Alarm output - N.O2
GRAY: Alarm in 7
PURPLE: Alarm in 6
ORANGE: Alarm in 5
or control devices
I/O interface to additional alarm sensor
Alarm I/O 2
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details

4.INSTALLATION
4.INSTALLATION
Video Cable
coaxial cable with 75 impedance with copper conductor at center conductor, and
shielded with 95% copper. The following table shows different cable type and its
maximum length:
Ω
The values are for reference only.
Depends on the cable quality and
environmental condition, the
transmission distance might be less.
RG 6 /U
Cable standard
RG 11 /U
229m / 750 ft
Max. Distance (m /ft )
305m/ 1000 ft
457m / 1500 ft
RG 59 /U
If the cable length is more than 400 m, it is recommended to use optional
accessories, such as video amlifier or twisted-pair video converter , for boost
the video signal.
Vid eo Amp lif ier
(optional )
Real time DVR C ent er
(optional )
High Res Moni tor
(optional )
Up to 750m, coaxial cab le
Extend connection dist ance with
video amplifier
TP re cei ver
(optional )
Real time DVR C ent er
(optional )
High Res Moni tor
(optional )
Up to 1200m, twisted pair or cat.5 cabl e
Extend connection distance with Twisted-Pai r
video converter
transmitt er
(optional )
The PTZ cameras provide integrated termination switch. It should be turned on
when the dome is installed as the last device. If the controller keyboard is used,
you need also to turn on the termination on it. please refer to the keyboard’s
manual for details.
RS-485Termination
Devices using Rs485 control are usually connected in daisy-chain. which reqiuers
termination with 120Ω resistor on both ends. Following picture illustrates the
connection methods. please note that a daisy-chain connection type shall not
exceed 7 meters.
120Ω
Resist or
Device 2 Device 3Device 1
120Ω
Resist or
RS 485+
RS 485-
RS 485+
RS 485-
Termination
on
Termination
off
Termination
off
How to turn on termination on the high speed dome camera
The termination switch is located on the rear side of the connection board. For
switching on, you need to open the
Star-Connection
The star-form connection is mostly used. it enables the connection of different dome
cameras in longer distance. It is recommended to use RS-485 distributor to ensure the
telemetric data transmission:
The advantage of star-connection is
that every channel can work
independently and take a cable
length up to 1000 meters( depends
on cable quality). In case more
dome camera are installed, the star-
connection can be extended with
additional RS-485 distributors.
Some products may not be available in your country, please contact our distributor for more details
123
Term. Off ( default)
Term. On
1 2 3
ON ON OFF
OFF ON ON
Jumper
Termination
Jumper
rear side
How to open the connector board
The connector board can be easily
opened by holding the metal clip and
pull.
Press the metal
clip in and pull
the board on this
direction.
Metal
Clip holder
Some products may not be available in your country, please contact our distributor for more details
78
Termination on
Termination on
RS-485
Distri but or
RS-485 cable
up to 1000m
per channel
Termination
activated on
every end.

5.OPERATING THE SPEED DOME
FIRMWARE V2.61
Protocol: PELCO
Dome Address: 001
Comm 9600,N,8,1
Initial Screen
After powering up, the camera will enter the
self-test mode and display the status screen(
as in the picture left).It contains information
about the model and current settings.
- V2.61: Current firmware version
- Protocol: control protocol which currently used
- Dome address: Address ID of speed dome. please refer to the section "Protocol
setup " for details.
- Comm 9600,N,8,1: current setting of the serial communication interface.
9600: Baud rate. please refer to section "Baud-Rate setup" for details
N, 8, 1: No parity bit, 8 bit length, 1 stop bit. this setting can not be changed
Operation Screen
The intial screen will stay remain on until any user action is being taken. If the power-
up action is set, the initial info wil vanish immediatly.
32.0CAM TITLE
ZONE-1
285 78 18X
Pan degree
Zoom factor
Tilt degree
Zone description
Temperature
4.INSTALLATION
Optional bracket accessories
The PTZ cameras can be equipped with various bracket accessories for indoor
and outdoor installation. please contact your distributor for further details.
Corner
Mount
Pole
Mount
Wall mount and
Power box
Ceilling
mount
Indoor Wall
mount
Outdoor
Power Box
Indoor ceilling
mount
Extended wall
mount
Swan-Neck
Mounting
bracket
Wall
mount
Installing the core unit to base board.
The PTZ camera core unit and base board are packed seperatly, in order to be
protected through the transportation. After unpaking and during the installation, the
core unit should be installed as following:
Installing the core unit by
pushing into the
housing.please note the
position of connector. For
releasing, please press the
lever-lock to core and pull off
the unit. Lever-
Lock
Connector
Interface
Power
LED
Metal
Clip
WARNING:
Do not pull or hold the connector interface with force. It
is design only to connect the core unit and the base
board. Any presure on connector will cause damage and
avoids the warranty.
PTZ operation
For the surveillance operation, the dome can be controlled from a keyboard device,
Multiplexer or DVR through RS-485 Interface. Make sure that the cable is connected
and the settings (baud rate, Address ID and protocol) of both keyboard and the dome
are configured correctly. For more description about the PTZ operation, please refer
to the user ’s manual of the keyboard.
Safety spring
Rubber ring
cable Heater connector
Once the base board is connected to power,
the power LED will light.
Heater connector
on outdoor
housing
Outdoor
housing cover
Screws
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details
9 10
Indoor
embedded
mount
The operation screen can display additional
information.
Temperature: current temperature inside the
speed dome( °C)
Cam title: User definable camera title
Zone: Current zone name
Pan deg.: Pan angle, 0-359°
Tilt deg.: Tilt angle, 0-90°
Zoom Factor: Zoom factor
Display of the information can be activate or
deactivate through the OSD menu. please refer to
the system setting for detais.

OSD
OSD Menu
The PTZ cameras are equipped with new OSD-Menu function. All operation functions and
camera related settings can be changed or modified here. In order to use the OSD function,
a telemetric controller device, such as Keyboard, DVR or other devices with similiar function
is necessarily required. please make sure that the device used is physically connected to the
dome properly, and all connection parameters are set correctly.
How to start the OSD menu
To start the OSD Menu, you need to press following key on the keyboard:
With or 2 X
With or 2 X
In case a DVR is used for the OSD, select “goto preset 95” or 2 X “goto preset 9”. Please
refer to the DVR’s operation manual for more details.
Note that in some certain situations, it is not possible to enter the OSD menu:
1. the dome is running tour
2. performing PTZ operation
3. dome is receiving command other than OSD-request from the keyboard.
please stop the operation and try again.
Shot 9 5 Enter
Main menu and navigation
Main Menu
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARM
EXIT
After entering the OSD Menu, the screen will show menu
items . Use the controller’ joystick to navigate through
the menu’s main and sub items by moving in the
direction. The angle mark on the beginning of every
items indicates the selection.
UP, DOWN: - Moving between current menu items
- Changing the value in subitems
RIGHT: - Enter the selected menu item
- Confirm the value change and return to
item selection
LEFT: Exit from sub menu
For more inforamtion, please refer to the illustration on
the next page for the OSD menu structure.
OSD - MAP
Symbols and indicator
Cursor.
Sub item is selected. use up or down to change value
This item has subitem(s)
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details
call 9 5 Enter call 9Enter
Shot 9Enter
MAI N MENU
SYS TEM SE TTING →
CAM ERA SET TING→
FUN CTION SETTI NG→
WIN DOW BL ANKIN G→
ALA RMS→
EXI T
SYS TEM SE TTING
EDI T DOME LABE L→
INI TIAL I NFO→
DIS PLAY SE TUP→
MOT ION→
CLE AR→
PASS WORD SETU P→
CLO CK SET TING
BAC K
EXI T
CAM ERA SE TTING
ZOO M SPEE D HIGH
DIG ITAL ZOO M ON
BLC MODE O FF
SLO W SHUT TER ON
LIN E SYNC N/A
WDR MODE N /A
ADVA NCE S ETTI NG 1 →
ADVA NCE S ETTI NG 2 →
BAC K
EXI T
FUNC TION SETTI NG
IR CU TTER FI LTER AU TO
IR CU T ON TI ME N/A
IR CU T OFF TIM E N/A
THR ESHO LD 10d B
MAX G AIN 28d B
EXP OSURE C OMP OFF
MIR ROR OFF
FLI P OFF
BAC K EXI T
PR ESET S
SC AN
SCA N NUMBE R 01
SCA N SPEED 6 3
SET L EFT LIM IT
SET R IGHT LI MIT
CLE AR SCAN
RUN S CAN
EDI T SCAN LA BEL→
BAC K
EXI T
PA TTER NS
PATTE RN NUM BER 1
PRO GRAM PATT ERN
RUN PAT TERN
CLE AR PATTER N
EDI T PATTE RN LAB EL→
BAC K EXI T
EDI T TOUR
P0- S-TM P0-S- TM P0- S-TM
00- 0-00 0 0-0-00 00 -0- 00
00- 0-00 0 0-0-00 00 -0- 00
00- 0-00 0 0-0-00 00 -0- 00
00- 0-00 0 0-0-00 00 -0- 00
00- 0-00 0 0-0-00 00 -0- 00
BAC K
EXI T
ZON ES
ZON ES NUMB ER 1
SET L EFT LI MIT
SET R IGHT L IMIT
CLE AR ZONE
EDI T ZON E LABEL→
BAC K
EXI T
DOME LABEL OFF
PRESET LABEL OFF
ZOOM LABEL OFF
ZONE LABEL OFF
DIRECTION LABEL OFF
TEMPERATURE LABEL OFF
TIME LABEL OFF
DATE LABEL OFF BACK EXIT
MOT ION
AUTO F LIP ON
PROP ORTION PA N ON
PARK T IME 005
PARK AC TION NONE
POWE R UP ACTION NO NE
FAN EN ABLED 040
TEMP C /F CENT
ADVA NVE SETTI NG →
BACK
EXIT
PASS WORD S ETUP
INI TIAL IN FO
SPE ED DOME V 2.61
PRO TOCOL : PELCO
DOM E ADDRE SS: 001
COM M: 9600 . N .8.1
BAC K EXI T
PRE SET NUM BER 00 1
SET P RESE T SHO W PRESE T
CLE AR PRES ET
EDI T PRE SET LAB EL→
BAC K
EXI T
LAB EL: PRE SET-0 1
BAC K EXI T
ED IT PRE SET LA BEL
LAB EL: AUT O SCAN
BAC K
EXI T
EDI T SCAN LABEL
LAB EL: PAT TERN- 1
BAC K
EXI T
EDI T PATT ERN LA BEL
LAB EL: ZON E-1
BAC K EXI T
EDI T ZONE LABEL
LAB EL:SP EED DOM E
BAC K
EXI T
1.0 0
EDI T DOME LA BEL
DIS PLAY SE TUP
ADV ANCE SE TTING 1
PRE SETS →
SCA N→
PATTE RNS→
TOU R→
ZON ES→
TIM E RUNN ING→
AUT O-TR ACKI NG
BAC K
EXI T
OLD PA SSWO RD : *** ***
NEW PA SSWO RD : *** ***
CON F PASS WORD : ** ****
ENA BLE PASS WORD O FF
BAC K EXI T
CLE AR ALL ZO NES
CLE AR ALL PR ESETS
CLE AR ALL PA TTERN S
CLE AR ALL TO URS
CLE AR ALL WI NDOWS
FAC TORY DE FAULT S
RES TART
BAC K EXI T
TOU R
TOU R NUMBE R 1
EDI T TOUR→
RUN T OUR
CLE AR TOUR
BAC K
EXI T
WIN DOW NUM BER 01
EDI T WINDO W
ENA BLE WIN DOW ON
CLE AR WIND OW
BAC K EXI T
WIN DOW BLA NKING
ALARM NUMBER 001 ALARN ACTION NONE ACTIVATE AUX NONE ALARM PRIORITY
BACK EXIT
ALARMS
RESUME OFF SEQUENCE 60 RESET DELEY 030 ALARM CONTACT N/O ALARM SETTING→ ARM SETTING →
BACK EXIT
ADVA NCE SE TTIN G
EIS E NABLE D N/A
PRE SET FRE EZE OF F
AUT O FOUC S OFF
DEF OGGER 0 15C
HEA D UP OFF
BAC K
EXI T
CLE AR
CLO CK SETT ING
TIM E 00:00 :00
DATE 0 1/01 /01
DAY MO N BAC K EXI T
AE MO DE AUTO
SHU TTER N/ A
IRI S N/A
BRI GHT N/A
WB MOD E AUTO
R GAI N N/A
B GAI N N/A
HI- RESOL UION N/ A
BAC K
EXI T
ADV ANCE SE TTING 2
TIM E RUNNI NG
DAY SU N
TIM E CHAN NEL 1
STAR T TIM E 00:00
RUN NING NO NE
BAC K
EXI T
AUT O-TRA CKIN G
DAY SU N
STATE O N
STAR T TIM E N/A
END T IME N/ A
SEN SITIV E LOW
TRA CKING -ZOOM O FF
SET L EFT LI MIT →
SET R IGHT L IMIT →
BAC K
EXI T
DAY SUN
ARM STATE OFF ARM TIME N/A
UNARM TIME N/A
BACK EXIT
ARM SETTING ALARMS SETTING
2-Axis
keyboard
3-Axis
keyboard

System Setting
In system setting menu, you can modify operation and
display setting, such as dome label, temperature and
display of various value on the operational screen.
EDIT DO M E L A B E L
LABEL： ENTRANCE
BACK
EXIT
INITIAL INFO
SPEED DOME V1.00
PROTOCOL：FACTORY
DOME ADDRESS：001
COMM：4800,N,8,1
BACK
EXIT
6.OSD - System Setting 6.OSD - Motion, Clear
Initial information:
Shows the information about current setting.
Dome Label:
1. use UP or DOWN to change the charactor.
2. use RIGHT to move to next char.
3. use RIGHT to move to last char and save.
4. use Left to first char and cancel.
Display setup
Actuvate the display for the on-screen info in operaton
mode.
Dome label: the name of dome
Preset label: shows the labe of every preset
Zoom label: shows zoom factor on screen
Zone label: shows the zone name
Direction label: shows the coordinates
Temperature label:
shows the cur. temp in the speed dome
DISPL A Y S E T U P
DOME LABEL OFF
PRESET LABEL OFF
ZOOM LABEL ON
ZONE LABEL OFF
DIRECTION LABEL ON
TEMPERATURE LABEL OFF
BACK
EXIT
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details
13 14
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
MOTION Motion control
AUTO FLIP: Auto. Image flip in tilt range from 90° to 180°
PROPORTIONAL PAN: depends on the zoom factor, the
dome will adjust the pan and tilt speed automatically for
comfortable viewing.
PARK TIME: defines the idle time prior to start a custom
defined action( park action).The range is from 1 to 240
minutes. This function can be deactivated by setting the
minute to 0.
PARK ACTION: the action which will be started after the
idle time (park time). Selectable between Preset, Scan,
Pattern (Nr), Tour or None.
POWER UP ACTION: defines the action which will be
started after power up and self test. Selectable between
Auto,Preset 1, Scan, Pattern (Nr), Tour or None. By
selecting Auto, the dome will resume the last action
before power off.
EIS ENABLED: Elctronic Image Stablizer.
PRESET FREEZE:
AUTO FOUCS: adjust the image focus.
DEFOGGER: when the temperature arrive the setting
degree, the heater will be open.
HEAD UP: flip the image.
Freezes image when moving between
presets in tour.
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME 005
PARK ACTION SCAN
POWER UP ACTION AUTO
FAN ENABLED 040
TEMP C/F CENT
ADVANCE SETTING
BACK
EXIT
Clear
You can clear setting’s memory or reset the camear to
factory default. The follwing functions are supported:
- Clear Zones
- Clear all presets
- Clear all patterns
- Clear all tours
- Clear all windows
- Factory defaults
Warning: The clear action can not be undone.
once a item is cleared it is impossible to
retrieve the deleted setting. Please make sure
that the requested clear action is desired.
CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL TOURS
CLEAR ALL WINDOWS
FACTORY DEFAULTS
RESTART
BACK
EXIT
O
NEW PASSWORD : ******
CONF PASSWORD : ******
ENABLE PASSWORD OFF
BACK
EXIT
LD PASSWORD : ******
PASSWORD SETUP
Password setup
You can change password to access the OSD menu.
Default Password is 000000.
TIME 00:00:00
DATE 01/01/01
DAY MON
BACK
EXIT
CLOCK SETTING Clock setting
Some function like Auto-Tracking require the timer for
activation.
Time: HH:MM:SS
DATE: YY/MM/DD
DAY: MON-SUN
ADVANCE SETTING
EIS ENABLED N/A
PRESET FREEZE OFF
AUTO FOUCS OFF
DEFOGGER 015C
HEAD UP OFF
BACK
EXIT

Camera setting
In camera setting menu, you can setup camera module
related settings. please note that depends on module’s
capability, some function may not available. please contact
your local sales representative for detailed information.
ZOOM SPEED: defines the speed when performing zoom
function.
DIGITAL ZOOM: Activate or deactivate the digital zoom
function of the camera module.
BLC MODE: Select the Back Light Compensation mode,
improves the image when an object has strong back light.
SLOW SHUTTER: Activates the Slow Shutter function of the
camera, which provides a higher light sensibility in low-
environment.
WDR: Activates the Wide Dynamic Range function, which
improves the image contrast when an object has very strong
light on background. Only available with camera modules
with WDR.
OSD - Camera Setting OSD - Preset, Scan
CA M E R A S E T T I N G
ZOOM SPEED HIGH
DIGITAL ZOOM ON
BLC MODE OFF
SLOW SHUTTER ON
LINE SYNC N/A
WDR MODE N/A
ADVANCE SETTING 1
ADVANCE SETTING 2
BACK
EXIT
ADVANCE SETTING 2
AE MODE AUTO
SHUTTER N/A
IRIS N/A
BRIGHT N/A
WB MODE AUTO
R GAIN N/A
B GAIN N/A
HI-RESOLUTION OFF
BACK
EXIT
Advanced setting 2
Under the advanced setting, you can make improvements
to image quality due to different environmental conditions.
AE MODE: Auto Exposure mode. Depends on the light
condition in the surveillance area, you can set the AE in
different modes and adjust the parameters, such as shutter
speed, iris factor and brightness for the best image quality.
WB MODE: White balance mode, a image improvement
based on DSP processing. you can also adjust the Red-
Gain or Blue-Gain to change the color tone.
ALC, PLC: Average and Peak Level Control, additional
setting to WB function. only avialble with dedicated camera
modules.
Function setting
In function setting menu, you can define and activate
different PTZ funcitons, such as preset points, auto
scan, tours and Pattern. Presets and tour functions
can also be set or activated directly from keyboard
device without OSD. Please refer to the keyboard’s
manual for operation details.
EDIT PRE S E T L A B E L
LABEL：ROOM 1
BACK
EXIT
PRESETS:
PRESET NUMBER: the PTZ supports up to
128 presets. The number can be selected from 0 to 128.
SET PRESET: Defining the preset points directly in
OSD by entering this menu item and move the PTZ.
press IRIS-OPEN key on the keyboard to save. If the
preset is pointed within digital zoom, it will
automatically go back to max. optical zoom range in
order to provide the best image.
SHOW PRESET: Moves to current preset point
CLEAR PRESET: Clear the current preset
AUTO-TRACKING: Start Auto Tracking, if the preset
is called.
EDIT PRESET LABEL: For the current preset, you
can define a name which will be shon on the
operation screen once the preset is called. please
choose the preset number at first. The avaialbe
characters are: 0-9, A-Z, <,>,. and space.
PRESETS
P R E S E T NU M B E R 0 0 1
S E T P R E S E T
S H O W P R E S E T
C L E A R P R E S E T
AUTO -T R AC KI N G ON
E D I T P R E S E T L A B E L
BAC K
EXI T
SCAN
The SCAN function moves the PTZ between 2-
predefined points in constant speed.The
following parameters can be set:
SCAN NUMBER: the PTZ supports up to 4 scan.
SCAN SPEED: cruising speed between the
points.
SET LEFT LIMIT: defines the left point.
SET RIGHT LIMIT: defines the right point
CLEAR SCAN: Delete the scan setting
RUN SCAN: starting the scan function
EDIT SCAN LABEL: set the name for the scan
SCAN
SCAN NUMBER 01
SCAN SPEED 63
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR SCAN
RUN SCAN
EDIT SCAN LABEL
BACK
EXIT
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details
15
ADVANCE SETTING 1
IR CUTTER FILTER AUTO
IR CUT ON TIME N/A
IR CUT OFF TIME N/A
THRESHOLD 10dB
MAX GAIN 28dB
EXPOSURE COMP OFF
MIRROR OFF
FLIP OFF
BACK
EXIT
Advanced setting 1
IR CUT FILTER: Enables the removal of Infrared Cutter
Filter (IRC), also known as “DAY/NIGHT” mode. with the
removal of IRC, the camera turns into Black/White mode and
has higher sensibility to low-light or IR-Light in the night.
Selectable between On, Off, Auto or Time. Only available
on camera module with IRC function.
Max Gain: improve the image quality in the Night modus
EXPOSURE COMP: open/close the exposure compensation
function
MIRROR, FLIP: mirror and flip image
FU N C T IO N S E TT I N G
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
AUTO-TRACKING
BACK
EXIT

6.OSD - Patterns, Tours 6.OSD - Zones and Privacy Mask
PATTE R N S
Pattern
Pattern records the user’s operation steps on
performing PTZ control and stores as a track. The
high speed dome series can record up to 4 tracks
with max. 180 sec. each.
PATTERN NUMBER: Selects the pattern number, from 1
to 4
PROGRAM PATTERN: Starts recording the pattern
when selected. you can perfome PTZ movement for
recording and shall not exceed 180 sec. Press IRIS-
OPEN to save the track.
RUN PATTERN: Starts the current pattern
CLEAR PATTERN: Delete curretn pattern.
EDIT PATTERN LABEL : Sets the name for current
pattern.
PATTERN NUMBER 1
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
BACK
EXIT
Tour
Tour is an auto-run through selected preset
points with definable pause time. A tour can
store up to 32 presets points.
TOUR DWELL: pause time for every stop on the
preset points. selectable between 000-255(s).
TOUR PRESETS: press IRIS-OPEN Key on the
keyboard device to enter the preset point
selection. Move the joystick with up and down to
select the preset points by number and save the
setting with IRIS-OPEN key. with IRIS-CLOSE
key you can move to the previous selection. If a
select point has the value 0, all the following
presets points will be ignored.
RUN TOUR: Starts the tour and exit the OSD
menu.
EDIT TOUR
TOUR DWELL 001
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
RUN TOUR
BACK
EXIT
Zone
to up to 8 zones with individual label. When the
display setting “Zone Label” is activated, the
label will be displayed on the operation screen.
The definition of the zones should not be
overlapped.
ZONES NUMBER: Current zone selection
SET LEFT LIMIT: Left limit of the current zone
SET RIGHT LIMIT: Right limit of the current zone
CLEAR ZONE: Delet the current zone
EDIT ZONE LABEL : change the laben of current
zone.
You can define the zones in the whole PT range up
ZONES
ZONES NUMBER 1
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details
17 18
TIME RUNNING
DAY SUN
TIME CHANNEL 1
START TIME 00:00
END TIME 00:00
RUNNING NONE
BACK
EXIT
Time Running
You can set up the timer to start a function like
preset, tour or pattern. Each day can be set 4
action.
AUTO TRACKING
DAY SUN
STATE ON
START TIME 00:00
END TIME 00:00
SENSITIVE LOW
TRACKING-ZOOM OFF
SET LEFT LIMIT
SET RIGHT LIMT
BACK
EXIT
AUTO TRACKING
Auto-Tracking can seach people or object with
high speed and low light performance.
DAY: set current day
STATE: activate AUTO-TRACKING on this day
START TIME: set the time for activation
END TIME: set the time for stop the tracking
SENSITIVE: set the sensitivity for the detection
TRAKING ZOOM: activate auto-zoom
SET LIMIT: set the max. angle for the tracking.

6.OSD - Alarm Setting
Alarms
RESUME: Continue the function on the camera , if it
was setting before the alarms.
RESET DELAY: How long the camera stay in Alarm
position.
ALARM CONTACT: Setting between N/C (normal Close)
or N/O (normal Open).
ALARM NUMBER: curent Alarm number.
ALARM ACTION: Setting for PRESET, SCAN, TOUR,
PAT 1-4, or NONE, if the camere in Alarm position.
ACTIVATE AUX: Setting Alarm Output, when Alarm is
activate. Select between AUX1, AUX2 (not connected)
or BOTH.
ALARM PRIORITY: define the priority of the alarm input.
ARM SETTING: define the operation timer of the alarm
7. Dome Address & Protocol
Sw1 Sw2
Protocol setting
In order to establish a connection for
telemetric control with keyboard device. you
need to setup the dome address and protocol.
The PTZ cameras are capable with multiple
communication protocol. The setting can be
changed through the DIP-Switches on the rear
side of the connector boards as Illustrated.
please use the following table for details setup.
current pattern.
Baud rate DIP 7 DIP8
2400 bps 0 0
4800 bps 1 0
9600 bps 0 1
19200 bps 1 1
SW 1:
represent the domes address in binary form.
please refer to the list on next page for reference.
SW 2:
Used for protocol settting and baud rate.
DIP 1 to 6 : Protocol setting
DIP 7 and 8: Baud rate setting
Protocol / DIP 1 2 3 4 5 6
B02 0 0 1 1 0 0
DIAMOND 1 0 0 1 0 0
HUNDA 1 0 1 1 0 0
KALATEL 0 1 0 1 0 0
LILIN 1 1 0 1 0 0
MOLYNX 0 0 1 0 0 0
PANASONIC 1 1 1 0 0 0
PELCO (D/P) 1 0 0 0 0 0
PHILIPS 0 0 0 0 0 1
SAE 0 1 0 0 0 0
SAMSUNG 0 0 0 1 0 0
SANTACHI 0 1 1 0 0 0
UNIVISION 0 1 0 0 0 1
VCL 1 1 0 0 0 0
VICON 1 0 1 0 0 0
AD 1 0 0 0 0 1
Some products may not be available in your country, please contact our distributor for more details
ALARM SETTING
ALARM NUMBER 001
ACTION TOUR
ACTIVATE AUX AUX1
ALARM PRIORITY LOW
BACK
EXIT
ALARM
WINDO W B L A N K I N G
WINDOW NUMBER 01
EDIT WINDOW
ENABLE WINDOW OFF
CLEAR WINDOW
BACK
EXIT
Privacy Mask ( Window Blanking)
Privacy Mask is used to protect the privacy area not to be
displayed once the camera is pointed on, such as
ulevatory area or the operation desk of an ATM machine.
It might be required for video surveillance application
depends on the local law regulation. The PTZ camera
supports up to 24 private masks. ( depends on installed
camera module, please contact your local sales
representative for more information)
Hitachi camera modules: 8 masking area.
Sony Camera modules: up to 24 masking area (
except the 45 series provides only 8)
LG,CNB Camera modules: no masking function.
WINDOW NUMBER: Mask number
EDIT WINDOW: Edit position of the mask by joystick of
the keyboard. presse IRIS-OPEN to save.
ENABLE WINDOW: shows the mask on screen OFF
CLEAR WINDOW: Delete the mask
ALARMS
Resume OFF
SEQUENCE 001
RESET DELEY 030
ALARM CONTACT N/O
ALARM SETTING
ARM SETTING
BACK
EXIT
ARM SETTING
DAY SUN
ARM STATE OFF
ARM TIME N/A
UNARM TIME N/A
BACK
EXIT
19

7. Address ID, 1 to 67 7.Address ID, 68 to 135

7. Address ID, 136 to 203
177
7. Address ID, 204 to 255

8. Specification
Some products may not be available in your country, please contact our distributor for more details
25
Iris Control
Gain Control
Video Output
S/N Ratio
Auto / Manua/ Auto Slow Shutter
LOW / MEDIUM / HIGH / MANUAL / OFF
CVBS : 1.0Vp-p/75Ω
Shutter Speed 1 to 1/10,000 Sec. 1/3 to 1/10,000 Sec.
Focus
White Balance
Auto / Manual
Auto / Manual (ATW, Indoor, Outdoor, One Push WB, Manual WB)
Wide Dynamic Function (SB18WD/ SB26WD / SB36WD models)
Viewing Angle
Image Sensor 1/4” Sony Super HAD Color CCD
Model
Signal Format
Scanning
PAL / NTSC
2:1 Interlace
H. Resolution Color: 550 TVL / B&W: 680 TVL
H: Appr. 55.5°(Wide) to 2.24°(Tele)
V: Appr. 42.5°(Wide) to 1.79°(Tele)
Min. Illumination 0.4 Lux/F1.6(50 IRE): Color / 0.02 Lux/F1.6 (50 IRE) : BW
More than 50 dB
Object Tracking
(only G70AT serie)
Communication
Preset Positions
Auto Pan
Tour / Sequence
Alarm inputs
Operating Environment
Power
Manual activation / Preset triggering / Scheduled activation
Tracking zone selection
RS-485, , coax16 Multiple protocol supported
128 Presets
Yes, between 2 presets
4 progr. Tours with max 32 presets/ 4 Pattern up to 180s
7 inputs / 2 output
Outdoor: -40℃ to 60℃ / IP66 weather protection
Indoor: -10℃ to 50℃ / humidity up to 95%
24V AC / 24W(indoor) 48W(outdoor)
On-Screen Display
OSD Menu
Date/ Time/ Zoom Rate/ Temperature/ Zones/ Camera name
Setup/ Automation programming/ Password protection
PTZ Characteristics 360° PAN (0.4° ~320° per sec) / 90° Tilt (0.4°~150° per sec) with
Auto Flip/ Vario-Speed control* / Proportional & constant PT speed
H: Appr. 55.5°(Wide) to 1.59°(Tele)
V: Appr. 42.5°(Wide) to 1.19°(Tele)
zoom
SP27HB-V55DN SP37HB-V55DN
P.I.C. P-042 P-043
27x Optical Zoom / 12x Digital Zoom 37x Optical Zoom / 12x Digital Zoom