OkiOki Mid-Century Nightstand User manual

OkiOki Mid-Century
Nightstand Instructional
Guide & Sleep Book

We’re providing you with the necessary
directions to easily and seamlessly set up
your new OkiOki Mid-Century Nightstand
as well as some leisurely reading to
reward your eorts.
1

Contents
3 Mid-Century Nightstand
Instructional Guide
18 A Bedtime Story
22 Sleep Facts
24 Notes from My Bed
2

3
OkiOki Mid-Century Nightstand
Instructional Guide
Assembly Instructions
2 persons recommended for assembly.
All instructional elements and diagrams provided in this manual are to
serve as a guide and are not meant to replace a licensed professional.
Any construction or use of the product must be in accordance with all
local zoning and/or building codes. The consumer is liable for all risk
and responsibility associated with the assembly and construction of
this product. The person or persons responsible for setting up this
product should follow all safety instructions carefully as to not put
themselves or any other parties at risk.
Read instructions, cover to cover
Have two adults on hand for assembly
Do not assemble on flooring or carpet
Assemble on a clean, non-marring surface (packing foam)
Save all packaging until finished
**CAUTION : This Nightstand is NOT a TOY. Keep your child/children at bay in the
process of assembly. For turning/flipping the Nightstand and to prevent damage to the Nightstand, 2
persons may be needed to execute this action.

4
What’s in the Box?
If any contents in the box are missing, please contact OkiOki
support right away at 1-833-OKIOKI1.
Parts List
Nightstand Hardware
Nightstand Restraint Device Hardware

5
Assembly Preparation
This Nightstand has multiple parts and may require up to 30 minutes
to assemble. To give you an overview of the Nightstand parts, the above
picture is to help you put the various parts into perspective. Please read
through the instructions here below to familiarise the parts and steps
before assembly.
Before beginnng assembly:
FRONT FACING
Nightstand (A)
Legs (B)

6
Now to the fun part!
Please follow the below steps carefully to ensure a proper assembly.
Step 1
• Unpack and place all parts on a clean, non-marring surface.
• In the next step, you’ll need to turn the Nightstand upside down in
order to assemble. To avoid risk for the user, take out the Drawers of
the Nightstand.

7
Step 2
• Place the Nightstand (A) upside down.
• Align and insert the four (04) Bolts of the Legs (B) to the mounting
positions at the Nightstand’s bottom corners.
• Insert the Bolts (1) through the mounting position and ax the Leg
(B) using the Allen Key (4).
• The use of Washer Springs (2) & Washer Rings (3) are optional and
are especially useful to help alleviate any slight wobble.
• If upon assessment there is any wobble, undo the relevant leg and
thread in a Washer Spring (k) & Washer Ring (3).
• Make sure all parts are connected and securely locked into position.
• To ensure there are NO WOBBLES to the feet, DO NOT overtighten
the bolts.
• Each bolt is to be driven in sequentially and where necessary, the
Nightstand may be turned to check for evenness.
• It may be necessary to execute this check twice to ensure that all 4
legs are axed to the Nightstand with no wobbles.
A
B
4
1
2
3
4
1
2
3

8
Step 3
• Step 3.1: Using a Phillips Screwdriver (not provided), take out the
Handle which is put in the Drawer as shown in the below picture.
• Step 3.2: To ax the Drawer, align the bolts’ mounting position of
the Handle to the mounting positions of the Drawer.
• Insert the Bolts through the mounting position and ax the Handle
by using a Phillips Screwdriver (not provided), as shown in the
below picture.
Step 3.1 Step 3.2

9
**Caution: This Nightstand can only be used on a flat, level surface.
Step 4
• Put the Drawers into the Nightstand.
• Ensure that all bolts of the Nightstand and the Handle of the
Drawers are fully driven in and locked in.
• The Nightstand now is ready to be used.