OKP M100 User manual

Questions Or Concerns?
Please Contact Us At
[e-mail]
VACUUM CLEANER
M100
Instruction Manual

The M100 vacuum cleaer is electrical appliance,so it must be used under
normal conditions,it should not be operated without supervision.
Operation say and notice
Do not plug in the vacuum cleaner when leaving.Unplug when not in use or before mainte-
nance.
To reduce the risk of electric shock, do not use outdoors or on wet suaces.
Please follow this instruction manual.Use only the functions recommended in this manual.
Do not use it when the plug or power cord is damaged.If the product falls,damages, is placed
outdoors or falls into water, and fails to work, please send it to
This product is for general household use, please do not use for commercial or other
purposes.
Try not to absorb glass slag, screws and other sharp hard objects, and construction waste, to
avoid damage to the machine.
Do not use the power cord as a handle or pull it close to the sharp edge.Don't exalt vacuum
cleaners on hot suaces.
Do not use when any duct is blocked.Otherwise, the motor will be damaged.When storing,
keep away from dust, lint, hair, and anything that can clog and reduce air volume.
Keep hair, clothing, mobile phones and any body pas away from vacuum cleaner openings
and moving pas.
Please turn o the machine switch before unplugging the power.
Please disconnect the power of the machine before connecting the aachment.
Do not adsorb anything that is burning or smoking.Such as cigaree bus,matches, or hot
ashes.
Do not use dust bins or strainers when they are not installed.Otherwise it will damage the
motor.
If the power cord is damaged and needs to be replaced, it must be repaired by a professional
or designated repair point.Do not disassemble without authorization.So as not to cause
danger.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
This product is not suitable for some special people, such as children, people with
disabilities, people with mental illness or people lacking experience and relevant
knowledge.Unless they're being supervised,Use this product safely.Please ensure that
children do not use this product as a toy.
Special note:

Introduction of ComponentsIntroduction of Accessory 21
Vacuum cleaner
Instruction manual
Extension tube
1.
4.
7.
Suction Nozzle
Metal filter
2.
5.
Normal Brush
HEPA
3.
6.
Switch
Power cord
Dust cup
extension tube
Normal Brush
Air cover
2 1
3 4 5 6
7
Item
Voltage/ frequency
Cord length
Vacuum
Handheld vacuum cleaner
120V~ 60Hz
6M
≥15kPa
Model No.
Power
Dust capacity
Machine size
M100
600W
0.8L
106*309*233mm

Inse the suction nozzle into the front of the dust cup of the laptop as shown in the
gure. Aer inseing the at suction into the appropriate depth, it can be xed by
friction
Inse Tube in the front of the dust cup of the laptop in sequence as shown in the gure.
Connect the connecting pipe component with the ground brush as shown in the gure,
inse the appropriate depth and x it by friction. The ground brush can be installed in
place and used.Used for cleaning oor and other objects
Operating instructions for hand-held vacuum cleaner accessories
3 4
Operation instructionOperation instruction
Plug the power cord into the socket for power connection
machine stas to work
Press the power switch buon on the poable phone, the machine stas to work, and
press the switch buon again when it is necessary to stop working.

Air sponge cleaning
6
Cleaning
5
Cleaning
Clean the lter components
Turn o the machine
As shown in the gure, grasp the handle of the
machine with the le hand and rotate the dust
cup counterclockwise with the other hand. When
the dust cup is rotated to the boom, pull out the
dust cup outward.
Hold the dust cup and press the arrow
to take out the lter assembly. Clean
up the dust.
As shown in the gure, grasp the handle of the machine with the le hand and rotate the
outlet cover plate clockwise with the other hand.
Pull out the cover plate outwards. Rinse out the cover plate and the sponge with
water.Dry before use.
Clean the lter components regularly, because the mites in the
adsorbed coon wool may not be killed, and will continue to breed. In
order to avoid secondary pollution, the lter components should be
cleaned aer cleaning, or replace with new lter components.
Note
Air cover
AIR Filter Sponge
dust cup
Metal filter
HEPA
Dust cup reset
A.Put the lter element into the lter assembly at any position, and then push the lter
assembly into the dust cup at any position.When the lter unit is at and cannot be moved
down, the unit is placed in place.
B.hold the host, press the disassembly dust cup component in the opposite direction,
push the dust cup into the boom parallel to the inside, and rotate the dust cup clockwise
to the boom

7
Cleaning and storage
All routine maintenance and maintenance work must be done aer the vacuum is
unplugged.
Oen clean the garbage in the dustcup to avoid the vacuum cleaner malfunction.
Vacuum cleaner suace cannot be swabbed with gasoline-like material or oily
material, should swabbed with so cloth or neuter washing-up essence, when be
swabbed, wipe cloth must twist dry, cannot water inltration vacuum cleaneelec-
tric equipment element inside.
Tie up the power cord and put it away with the vacuum cleaner.
The storage area should be kept dry.
Do not pile heavy objects above the vacuum cleaner.
1.
2.
3.
4.
5.
6.
8
Touble shooting
When encountering the following general problems, users can conduct their own investigation:
Note: when the following problems are found, please turn o the switch immediately to
prevent damage to the machine and other hazards.
Reason
power o
did not switch the buon
without baery pack
spare pas damage
dustbin is full or the vent is blocked
dustbin is full
baery is low
HEPA is broken
forgeing put back the HEPA
Problem
could not turn on
Noise
the suction has reduced
dust come out
during using
Solutions
recharge
turn on the switch
put back the baery pack
change the vacuum cleaner
remove and clean the dustbin
remove and clean the iter
recharge
turn o the machine and change the HEPA
stop using ,put back the HEPA
Cleaning and storage