Olli Maika MK100B User manual
LED Ring
Power PortPower Cable
Power Adapter
OLLI MAIKA SPEAKER
2
Microphone Off
Volume
Down
Microphone
Volume
Up
MAIKA Action
OLLI MAIKA SPEAKER
3
Notes: Turn off 4G/5G/LTE on your smartphone before starting
setup the speaker. The content of this user manual may not include
the latest update of OLLI MAIKA Speaker. For the latest information,
Step 1: Make sure you place your OLLI MAIKA Speaker at a location
with strong WiFi signal and that there is no nearby devices causing
WiFi interference such as wall, glass or metal object.
Step 2: Download and install the latest version of MAIKA app from
Apple App Store or Google Play Store.
Step 3: Open MAIKA app, go to Device ()> Add new device
(), and follow the instruction on the mobile app to
setup your speaker.
SETUP YOUR OLLI MAIKA SPEAKER
4
TALK TO YOUR OLLI MAIKA SPEAKER
To start communicating with your OLLI MAIKA Speaker, simply
say , for which the speaker will answer with a
LED, and tell your request.
5
SAMPLE REQUEST TO ASK YOUR OLLI MAIKA
6
- Reduce the noise of surrounding environment where you place
your speaker.
- Place your speaker at a location with less noise interference.
Avoid placing your speaker close to air conditioner, refrigerator,
- Recommend to put your speaker close to soft materials such as
fabric, mattress, foam.
- Talk to your speaker slowly to avoid missing voice.
- Pronounce correctly and clearly each word in the wake word.
- Say wake word loudly, especially when the speaker is playing
music.
- Stand close to the speaker when talking.
- MAIKA may not work well temporary since its surrounding
environment is so noisy. Please use MAIKA Action button to
activate it or try again later.
- Your OLLI MAIKA Speaker might encounter some issue. Please
contact our Customer Service for assistance.
Step 1: Press and hold MAIKA Action and Volume Up buttons
at the same time for 2 seconds or say
sound with . It will also automatically connect to
the most recent connected device (if any).
Step 2:
which is same as your speaker name. The LED ring will blink once
and turn off. Your speaker will also play the voice
ed
successfully.
successfully or timeout in 45 seconds.
8
-
- To increase or decrease volume, press Volume Up or Volume
Down button or simply say the request listed in page 6.
- Increase/decrease volume by voice will adjust 2 levels.
- Volume will change back to level 6 as default after factory reset.
- To turn off volume, press Volume Down button until it reaches
- If the volume is turned off, press Volume Up button to increase
it back.
- You still can talk to your OLLI MAIKA Speaker as usual when the
volume is turned off. All speaker’s features remain working normally.
However, you won’t hear any response sound.
- If the volume is turned off, LED ring will show color
to indicate.
9
If your OLLI MAIKA Speaker loses WiFi connection, LED ring will
show color to indicate. You cannot communicate
V
speaker will automatically reconnect to the WiFi network.
You can go to function on
MAIKA app and select
option to setup your speaker to an old or new WiFi
network.
If
reset your speaker to setup it with MAIKA app again.
If your OLLI MAIKA Speaker still loses WiFi connection, please
contact our Customer Service for assistance.
You can mute your speaker’s microphone if you want to stop
communicating with it temporary. To do that, press Microphone
Off button on the speaker. To unmute it, press Microphone Off
button again.
Your OLLI MAIKA Speaker won’t listen to wake word
anymore. It won’t respond to any voice commands also.
- I
sound as usual. You need to press MAIKA Action button to
accept the call and unmute microphone if you want to talk.
-
button to turn it off.
- Scenes/routines that have been setup before will work normally.
- LED ring will always show color to indicate until the
microphone is unmuted.
You may need to do factory reset your speaker to original state in
- Press and hold Volume Up and Volume Down buttons at
the same time.
- LED ring will show
Keep holding the buttons.
-
factory reset. You can release the buttons now.
-
-
restarting.
In addition, you can do factory reset via MAIKA app. Go to Device
() >select speaker > System ( )
().
device will auto restart to have the changes take effect. It will do
color. Please do not unplug your speaker’s power
during this process.
Device ( > System ( ).
- Keep the speaker from dropping or crashing.
- Do not tear down the speaker or its power adapter.
- Do not place the speaker under the sunlight directly or in a high
temperature environment.
- Do not place the speaker in a wet place or close to the water.
- Do not clean the speaker with corrosive chemicals.
-
period.
- Observe environmental protection regulations when discarding
and recycling the speaker and its accessories, materials, and
packaging.
H
public holidays.
Yo
for instant assistance.
From MAIKA app, go to ( )
().
or use feature ( ) () from
MAIKA app.
When using OLLI MAIKA Speaker, if you need any support, please
OLLI MAIKA Speaker is free warranted against defects in materials
and workmanship caused by manufacturer or new software issues
- Damaged caused by accident, misuse.
-
objective causes.
- Scratched, cracked, broken, dented due to crashing or dropping.
- Damaged caused by using a power supply other than the speaker
- Damaged caused by placing the speaker in a place subject to
high temperature and humidity, or contact with liquids.
-
without OLLI permission.
If your speaker is not eligible for this warranty or out of warranty,
you still can send it to us for repair. The repair cost varies depending
OLLI MAIKA Speaker is applicable for electronic warranty of
the manufacturer. Follow below instructions to obtain warranty
1
From MAIKA app, go to ( )
() and follow the instruction on the
app. Our shipping partner will come to pick up your device.
Notes: Please pack the speaker carefully to avoid damage during
box for packing.
2
Y
for warranty request.
3
O
Vietnam
Notes:
or go to () on MAIKA app or contact us directly.
under the Vietnamese law.
Only audio data captured while the speaker is in Listening Mode is
sent to our server for processing. At other times, the speaker just
waits for the voice command from the user and does
not save or send the audio data out.
history is saved, you can go to the MAIKA app > Device ()
>select speaker > My Activity ().
-
- 4 elements microphone array.
-
-
-
-
-
versions.
We do not support it currently.
Speaker’s surrounding environment sometimes has sounds that
from other sources such as television, radio, etc… This causes
false wake word triggered.
Same as above, MAIKA is accidentally triggered due to surrounding
environment sounds. So, your speaker replies.
Probably your speaker has an issue with sound component.
Please contact our Customer Service for assistance.
