Olympus CAMEDIA C-100 User manual

●Thank you for purchasing an Olympus digital camera.
●Follow the procedures in this manual to install the USB driver. Following
other procedures may result in incorrect installation.
CONNECTING
THE CAMERA
TO A PC
DIGITAL CAMERA
C-100
D-370
OPERATION MANUAL

2
INTRODUCTION
This manual explains in detail how to connect your camera to a personal
computer. Read it carefully and keep it in a safe place for future reference.
ABOUT THIS MANUAL
●The contents of this publication are subject to change without notice. For
the latest information, please contact your local Olympus representative.
●Considerable care was taken in preparing this manual. If, however, you
have any queries or note any errors or omissions, please contact your
local Olympus representative.
●Duplication of this manual, in whole or in part, other than for personal
use, without the prior permission of Olympus is prohibited. Reproduction
without permission is strictly prohibited.
TRADEMARKS
●Microsoft products, such as Windows and Internet Explorer are registered
trademarks or trademarks of Microsoft Corporation in the United States of
America and in other countries.
●Macintosh and Apple are registered trademarks of Apple Computers, Inc.
●Other brand names and product names mentioned in this manual are
trademarks or registered trademarks of their respective owners.

3
INDEX
FOR Windows (98/Me/2000) USERS 5
FOR Macintosh (Mac OS9) USERS 15
FOR OTHER OS USERS 21
Windows Macintosh

4
FLOW
Checking
Connecting
Installing (First time only for Windows)
Saving
Disconnecting
There are various items to be
checked before you start.
Connect the camera to the
PC using the USB cable.
Install the driver in the PC to
ensure detection of the
camera.
After checking that the PC
detects the camera, you can
copy and save images on the
PC.
Disconnect the camera from
the PC.
➜➜➜➜

5
Windows
CHECKING
• When a SmartMedia card is inserted, you can download the images
stored on the card.To download images from the internal memory,
remove the SmartMedia card.
• Turn the PC on and check that Windows is running.
• Quit all applications that may be running.
• Olympus recommends the use of an optional AC adapter. If you
are using batteries and the power runs out while you are accessing
the SmartMedia card in the camera from the PC, the camera may
stop functioning mid-operation and files (image data) may be lost.
• If you are not using an AC adapter, check the battery level to make
sure that there is enough power left.
• Do not connect or disconnect the AC adapter while the camera is
connected to the PC.
Caution
•Olympus cannot guarantee operation on a PC that has been
upgraded from Windows 95 to Windows 98 even if it has a USB
connector.
•If the camera is connected to the PC with the batteries still
loaded in the camera, connecting and disconnecting the AC
adapter may lead to damage or loss of the image data on the
SmartMedia card or computer system lockup.
•Use the USB cable to connect the PC and the camera.
We cannot guarantee operation if you connect the PC and the
camera by HUB adapter (for connecting several peripheral devices).
•Olympus cannot guarantee operation on a PC whose
operating system is not pre-installed at the time it leaves the
factory or a PC assembled by the user, as the operating
environment of such PCs is not guaranteed by the
manufacturer.
Connecting your camera to the PC ........................................ 6
Installing the driver (First time only) ....................................... 7
Saving images from your camera on the PC ....................... 10
Disconnecting your camera from the PC ............................. 13
FOR Windows
(98/Me/2000) USERS

6
Windows
CONNECTING YOUR CAMERA TO THE PC
1Insert the connector on one end of the USB cable into
the USB port of the PC.
Note
The position of the USB port varies depending on the PC. Refer
to the operation manual for the PC.
2Make sure that the lens barrier of the camera is closed.
3Open the connector cover on
the camera.
4Insert the connector on the
other end of the USB cable
into the USB connector on the
camera.
5The green lamp lights.
The camera is now connected to the
PC.
Caution
All buttons on the camera are ignored when it is connected to
the PC.
This mark is engraved
on the connector
Connector
USB port
Green lamp (lights)
Connector cover
Connector
USB
connector

7
Windows
INSTALLING THE DRIVER (FIRST TIME ONLY)
If you are using Windows 98, install the driver by following the procedures
explained below. If you are using Windows Me/2000, you need not follow
these procedures as the driver will be installed automatically. Proceed to
“Saving images from your camera or the PC”( p.10).
1The New Hardware Found window will be displayed on
the PC monitor.
2Click on [Next].
3Select [Search for the best
driver for your device.
(Recommended)] and click on
[Next].
4Insert the CD-ROM supplied
with the camera into the CD-
ROM drive of the PC.
If the CAMEDIA window is
automatically opened, click on
[close].

8
Windows
INSTALLING THE DRIVER (FIRST TIME ONLY)
5Select [Specify a location:]
and click on [Browse].
6Click on +on the left of the
CD-ROM drive icon.
7Click on +on the left of the
[Usb] folder.
8Select the [Win98] folder in
[USB] folder and click on
[OK].

9
Windows
INSTALLING THE DRIVER (FIRST TIME ONLY)
9Click on [Next].
10
Click on [Next] when the
driver has been detected.
Installation of the driver will start.
Do not turn the PC off or disconnect
the camera from the PC during
installation.
11
Click on [Finish].
12
Installation of the driver is
now completed. Proceed to
“Saving images from the
camera on the PC” on next
page.

10
Windows
SAVING IMAGES FROM YOUR CAMERA ON THE PC
This function enables you to save images on the PC. The My Documents
folder is used in this manual as an example. You choose or create a different
folder if desired.
1Double-click on the [My
Computer] icon on the PC
desktop and open the window.
2Double-click on the
[Removable Disk] icon.
The [Removable Disk] icon will be
displayed when the camera is
connected to the PC, indicating that
the camera is recognized as the
[Removable Disk].
Note
•If the [Removable Disk] icon is not displayed, or if an error
message is displayed when you double-click on the
[Removable Disk] icon, one of the following may have
occurred:
1There is a problem with the power supply to the camera
(the AC adapter is not connected properly or the batteries
are exhausted).
2There is a problem with the SmartMedia card.
Check that you can confirm recorded images on the
camera’s monitor.
3There is a problem with the connectivity between the
camera and the PC via the USB cable.
•If no SmartMedia card has been inserted in the camera, the
internal memory will be indicated by a [Removable Disk] icon.
If a SmartMedia card has been inserted, the card will be
indicated by a [Removable Disk] icons.
3Double-click on the [Dcim]
icon and open the folder.