Omcan BS-VE-3200-S User manual

Revised - 09/01/2017
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Bandsaws
Model BS-VE-3200-S, 3200-T
Item 10272, 18943
Instruction Manual

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 5
-------------------------------------------------------------------------- 6
-------------------------------------------------------------------------------------------- 6
----------------------------------------------------------------------------------------- 6 - 7
------------------------------------------------------------------------------------ 7 - 8
----------------------------------------------------------------------------- 9 - 17
---------------------------------------------------------------------- 18 - 19
------------------------------------------------------------------------------------------- 20 - 22
---------------------------------------------------------------------------- 23
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model BS-VE-3200-S / Model BS-VE-3200-T

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
MAIN PRECAUTIONS
When incorrectly used, a bandsaw can be a potentially dangerous machine. Cleaning, maintenance or service
must always be done by experienced operators, and with the machine disconnected from the electricity supply.
• NEVER use tools not belonging to the machine to help operation.
• KEEP hands off the moving parts of the machine.
General Information
Safety and Warranty

5
Safety and Warranty
• NEVER connect the power source with wet hands or wet clothes.
• ALWAYS ground the machine properly.
• NEVER touch the blade even when it is not in use because its edge is very sharp, it can cause serious
cuttings.
• NEVER adjust the cutting regulator (optional) with the blade in motion.
• NEVER use clothes with loosen sleeves specially near the wrist during the cutting operation.
• USE steel gloves during the cutting operation.
• NEVER switch on the machine with one of its doors opened.
• NEVER spray water or other liquid substances directly at motor, power switch or any other electrical
components.
• KEEP your working area clean and dry to prevent it from becoming slippery.
• ALWAYS install equipment in working area with adequate light and space away from CHILDREN and
visitors.
• NEVER operate without all warning labels attached and owner/operator manual available to operator.
• NEVER leave unattended while operating.
• STOP the machine immediately if you hear abnormal noises, of fear that injuries may occur.
• CONTACT your Distributor if you have any problems with the installation and operation of this machine.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

6
Installation
Operation
Be sure to install the bandsaw in an easily accessible area with plenty of space.
Grounding wire must always be connected.
IMPORTANT: Check the tension of the blade by turning the handle clockwise before operating it.
BEFORE OPERATION
Check and make sure the machine is in a stable location. Wash with warm water and soap all the food-contact
parts, and wipe dry. To do it proceed as follows:
1. Switch the machine off and disconnect it from the power source.
2. Open the upper door and lower door by pulling the handle.
3. Loosen the blade turning the handle or calibrator (optional) clockwise and take it out from the upper and
lower wheels.
4. Take out the staples which are in front of the upper and lower wheels to be able to pull them out.
5. Assemble the components following the inverse steps.
IMPORTANT: The blade must be well calibrated. Use the handle turning it clockwise to get the right
tension of the blade. Keep the machine off to adjust the cutting regulator.
Technical Specications
Model BS-VE-3200-S BS-VE-3200-T
Power 3 HP / 2.24 kW
Blade Length 126” / 3200mm
Blade Saw Dimensions 0.8” x 12.6” / 20 x 320mm
Cutting Capacity 15” x 18” / 381 x 457mm
Electrical 220V / 60 Hz / 1 Ph 220V / 60 Hz / 3 Ph
Amps 11A 9A
Weight 374 lbs. / 170 kgs.
Packaging Weight 415 lbs. / 188 kgs.
Packaging Dimensions 40” x 54” x 96” / 1016 x 1372 x 2438mm
Item Number 10272 18943

7
Operation
Maintenance
OPERATION
Switch on the machine pressing the on/off switch.
Put the product to be processed onto the table, pushing it to the direction of the blade lined up by the cutting
regulator (optional), maintaining the thickness of the slice desired.
When pulling back the product do not touch the blade avoiding disconnecting it from the wheels.
Drop a little bit of water onto the xed table to facilitate the slipping of the product.
COMPONENTS ADJUSTMENT
PULLEY BELT
• The belt must be rmly xed to prevent it from skidding. Do not tighten it too much because it can wear out
quickly.
• To have access to the belt remove the screws with a screwdriver from the inferior back lid and take it out.
• With a screw-wrench loosen the screws turning it counter-clockwise. To stretch out the belt you have to
push the motor with the wood lever tightening the screws.
IMPORTANT: The pulleys must be lined up.
UPPER BEARING ADJUSTMENTS
• The purpose of this adjustment is to centralize the blade on the gear and avoid it falling down.
• First of all disconnect the machine from the electricity supply. Then loosen blade turning handle counter-
clockwise.
• Take out upper back lid by removing screws using the screwdriver. Loosen the three screw-nuts using a
10mm screw-wrench.
• Using the screwdriver turn the screw-nut ¼ counter-clockwise if the wheel is inclined towards the front or
turn it ¼ clockwise if it is inclined backwards. Tighten the three screw-nut previously loosen. Calibrate the
blade according to pre-operation.
• Turn the wheels manually to check if the blade is centralized, if it is not keep turning the wheels until the
blade is centralized.
CUTTING REGULATOR
• The cutting regulator (optional) was designed to provide cuts with the same thickness and also to protect
the operator from getting injured.
• To adjust the cutting regulator proceed as follows:
Turn locking knob counter-clockwise to be able to move the cutting regulator to the left and right according
to the distance you want to leave from it to the blade.
• Then turn the locking knob clockwise to x the cutting regulator in the desired position.

8
Maintenance
CLEANING
First of all disconnect the machine from power source.
• Remove the upper door by unscrewing the screws of the hinges.
• Remove the lower door doing as above.
• Remove the blade by turning blade calibrator knob counter-clockwise, then loosen the blade and pull it out.
• Take out upper and lower wheels by pulling staples out, which are located in front of the wheels.
• Never use hard tools such as: knives, forks, hooks, or others to remove stuck pieces of cut meat from the
upper and lower doors. To do that use a plastic brush.
• Assemble the components following the inverse steps.
NOTE: The sharp edge of the blade must be facing the front of the machine.
All removable components must be washed with warm water and neutral soap. Be careful when washing the
blade. It has a sharp edge that could cause serious irreparable injuries to the hands.
CAUTION: The machine is not protected against water jets. Do not clean it with steam jets, or high
pressure blasts or similar methods. Under no circumstances should the bandsaw be hose rinsed as
this may result in short circuit or serious damage to the machine.
Clean the body of the machine with a damp clean cloth and wipe dry.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
10272 BS-VE-3200-S Band Saw 126” / 3200mm Blade
3 HP / 2237W 220V/60/1 ETL B40
18943 BS-VE-3200-T Band Saw 126” / 3200mm Blade
3 HP / 2237W 220V/60/3 ETL B40-3PH

9
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943

10
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943

11
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943

12
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943

13
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943

14
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943

15
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943

16
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943

17
Parts Breakdown
Model BS-VE-3200-S 10272
Model BS-VE-3200-T 18943
Item No. Description Position Item No. Description Position Item No. Description Position
62199 Front Cover for Steering Wheel for B40 06226 62189 Fork for B40 060074 62197 Complete Car Iron Wheel for B40 060181
62060 Washer for B40 060003 62201 Switch for B40 060076 62190 Graduated Screw for B40 060184
62202 Metal Tray for B40 060009 62073 Blade Scraper for B40 060078 62095 Guide Screw for B40 060187
62185 Base with Facial Steel Roller or Iron
for B40 060011 62187 Flywheel Scraper for B40 060080 62096 Nut for B40 060190
62152 Motor Base for B40 060012 62186 Steel Handle for B40 060081 62182 Lower Cylindrical Flywheel for B40 060193
62061 Long Door Hinge for B40 060014 62160 Micro Switch for B40 060089 62206 Complete Upper Cylindrical Flywheel
for B40 060202
62210 Full Arm Shield for B40 060019 62208 Complete Aluminum Housing for B40 060098 62181 Upper Cylindrical Flywheel for B40 060206
62166 Belt for B40 060027 62078 Tightening Knob for B40 060107 62183 Trapezoidal Flywheel for B40 060209
62153 Lower Axle Trapezoidal Steering Wheel
Pin for B40 060029 62079 Door Knob for B40 060108 62204 Motor Tension Screw for B40 060222
62184 Spacer for B40 060033 62192 Aluminum Front Plate for B40 060116 62157 Front Cover for B40 060229
62209 Arm Shaft for B40 060035 62188 Flywheel Scraper Holder for B40 060119 62200 Aluminum Housing for B40 060239
62191 Lower Shaft for B40 060038 62203 Motor Pulley for B40 060124 62099 Door Hinge for B40 060245
62198 Top Flywheel Shaft for B40 060042 62142 Roller Port Guide for B40 060127 62102 Front Plate Screw for B34 060248
62205 Steel Square Brackets for B40 060048 62178 Complete Roller Guide for B40 060128 62103 Buttery Screw for B40 060249
62065 Aluminum Flange for B40 060049 62193 Blade Protector for B40 060131 62156 Rear Cover for B40 060251
62066 Aluminum Front for B40 060051 62164 Complete Control Box for B40 060134 62163 Control Box for B40 060252
62207 Complete Front Plate for B40 060054 62132 Hairpin Spring for B40 060138 62161 Green On Button for B40 060253
62170 Steel Door Hook for B40 060062 62155 Retainer Clip for B40 060140 62162 Red Stop Button for B40 060254
62069 Guide Grooved Forks for B40 060063 62086 Roller Bearing 6200 for B40 060148 62143 Screw for Roller Port Guide for B40 060255
62145 Lower Steel Guide for B40 060064 62154 Roller Bearing 6206 for B40 060149 62144 Screw for Clutching Roller for B40 060256
62070 Steel Guide Support for B40 060065 62087 Roller Bearing 6205 for B40 060150 62148 Iron Flywheel Cleaner Screw for B40 060257
62147 Aluminum Guide for B40 060066 62196 Complete Pulley for B40 060157 62195 Wheel Shaft for B40 060259
62149 Nylon Guide for B40 060069 62194 Complete Flat Wheel for B40 060161 62146 Screw for Aluminum Guide for B40 060261
62151 Motor Base Rubber for B40 060070 62138 Seal for B40 060164 39414 Motor 110/60/1 for B40
62071 Rubber Stopper for B40 060071 62091 Aluminum Support for B40 060167 23717 On/Off Switch Assembly for B40

18
Electrical Schematics
Model BS-VE-3200-S 10272

19
Electrical Schematics
Model BS-VE-3200-T 18943

20
Notes