Omni VMP30A User manual

Omni-MPlayer
-VMP30A-
User Manual
Copyright © 2008. No part of this document may be copied or reproduced in any form or
by any means without the prior written consent.

Contents
1. Introduction .........................................................................................................1
1.1 Specification......................................................................................................2
1.2 Package contents...........................................................................................2
2. Remote controller .............................................................................................3
2.1 Replace & Install The Batter .................................................................3
3. VMP30A Installation............................................................................................4
3.1 HDMI Connection.........................................................................................6
3.2 Component Video(YPbPr) Connection .............................................6
3.3 D-Sub(VGA) Connection .............................................................................7
3.4 Composite Video(A/V) Connection.....................................................7
4. VMP30A OPERATION GUIDE...............................................................................8
4.1 Auto-Start...........................................................................................................8
4.1-1 Auto-Start Feature Setting .......................................................8
4.1-2 Remote Controller functions on AUTO-Start............9
4.2 Main Menu ....................................................................................................... 10
4.3 Photo Mode .................................................................................................... 11
4.3-1 Photo Pla ing Functions........................................................ 12
4.4 Music Mode ..................................................................................................... 13
4.5 Video Mode...................................................................................................... 14
4.5-1 Video Pla ing Functions ......................................................... 15
4.6 File Mode........................................................................................................... 16
4.6-1 Cop ing a file .................................................................................. 17
4.6-2 Deleting a file................................................................................. 20
4.6-3 Note....................................................................................................... 20
4.7 Setup Mode....................................................................................................... 21
4.7-1 Note....................................................................................................... 21
4.7-2 S stematic Diagram of options........................................... 22
4.8 Device Mode.................................................................................................... 24
5. Trouble shooting ............................................................................................. 25
6. Limited Warrant .............................................................................................. 26

1
1. Introduction
VMP30A Omni-MPlayer is a whole new multimedia projection system with a handy modern feel
to its modeling and convenient to carry along everywhere Not only can it enlarge your existing
televisions or monitors into a large dimension digital photo frame, it too can be complemented
as a music player You only need to insert the memory card, USB flash drive of your digital
camera/mobile phone into the built-in card reader and turn on the power, to be able to relax
and enjoy the pleasures of digital viewing This projection system is equipped with HDMI
multimedia connector interface supporting high definition signals of 720P╱1080I, and widely
suitable for use in monitors of any size
Simple to Operate
No need to purchase additional computers, digital photo frames or other equipment, you only
need to connect Omni-MPlayer to your television set or monitor to be able to easily display
photos and play music
Wide Range of Use
Applicable for use with business briefings, advertisement installations, wedding dinners,
seminars, etc , Omni-MPlayer can satisfy your needs in various aspects
Product unctions:
1 Automatically broadcast slide show or movie from the multimedia files within the memory
card upon switching on the projection system
2 May copy/delete designated parts of files in one or multiple files of the memory card
through the remote control
3 May amend or adjust the output effects of images according to your needs

2
1.1 Specification
Model VMP30A
Supported File Format
Photo: JPEG, TIFF, PNG, GIF, BMP, Motion-Jpeg
Music: MP3, LPCM, OGG, AAC
Video: MPEG-1/2, AVI(MPEG4, DivX 3 11/4 X/5 X, XviD)
Supported Memory Card Types
CF I/CF II, SD, MS, MS Pro, XD, SM, MMC, USB flash disk,
Microdrive
Video Out Interface HDMI, Composite Video, Component Video, D-Sub
Audio Out Interface Stereo Audio, SPDIF
Read Speed Max 30 FPS/10000 Kbps for CF/USB slot
Max 30 FPS/3000 Kbps for 4-in-1 slot
Supported TV system NTSC/PAL
Supported Display HDTV, LCD TV, Plasma TV, TV, Projector, PC Monitor, Car
Monitors
Max Resolution Photo: 8000X8000(Input), 1080i(Output)
Video: 800X600(Input), 800X600(Output)
OSD Languages English/Chinese/French/Deutsch/Français/Svenska/Dans
k/Português/Español
Operating Temp Range 0-60 /32℃-140℉
Power Supply 5V DC/2A or 12V DC/1A
Size / Weight 17cm X 11 5cm X 3cm/222g
Compliances CF/FCC/VCCI/T-ICK/HDMI/RoHS
* Do not block the thermal discharge holes on both sides of VMP30A
1.2 Package contents
1 VMP30A X 1
2 Power Adaptor (DC 5V) X 1
3 Remote Controller X 1
4 HDMI Cable X 1
5 AV Cable X 1
6 User’s Manual X 1
7 Stand X 1

3
2. Remote controller
Power ON / OFF Previous
Main Menu Next
Output Switch Play / Pause
Menu Mute ON / OFF
Enter Increase Volume
Navigation key: to move UP Decrease Volume
Navigation key: to move DOWN
Music + Photo Slide Show
Navigation key: to move LEFT Video Slideshow
Navigation key: to move RIGHT
reserved key with no function
2.1 Replace & Install The Battery
1 Turn the remote controller upside-down
2 Pull out the battery tray
3 Replace/Install a CR2025 Lithium button battery
4 Push the battery tray back
* Please remove the transparent plastic battery cover when you use the remote
controller for the first time

4
3. MP30A Installation
Select a connector that suits your display We recommend you to use the HDMI for best
displaying result if your display is capable for HDMI connection Otherwise, you can use
Component video(YPbPr), Composite video(A/V) or VGA(D-Sub) connector
To ensure that your display functionally connected, please check the following items after the
connection:
1 Switch your display’s input source to the one you connect the VMP30A with
2 Turn the VMP30A on without inserting any memory card and you will see a message “No
Device Present” on the screen(Please insert your memory card now) If there was no screen
or the screen not correctly showed, please keep pressing the button on the remote
controller every 3 seconds to switch to the correct output
A: Stereo audio output jack
B: Video output jack
C D E: Component Video jacks
: D-Sub port(VGA)
G: HDMI(High-Definition Multimedia Interface) jack
H: DC power jack
I: Power switch
J: USB port (for USB flash disks/Card readers)
K: CF card slot (for CF I/CF II cards & Microdrives)
L: 4-in-1 memory card slot (for SD/XD/MS/MS Pro/SM/MMC cards)

5
M: The power indicator (ON: Blue/OFF: Red)
1: The stereo audio cable of Composite Video
2: The video cable for Composite Video
3: The HDMI cable
4: The power adaptor
Please note that you have to connect the stereo audio cable unless you use the
HDMI connection for audio output

6
3.1 HDMI Connection
Connect your HDTV with an HDMI cable
The HDMI connection
diagram
3.2 Component ideo(YPbPr) Connection
Connect your display with a Component Video cable and a stereo audio cable
The Component Video
connection diagram

7
3.3 D-Sub( GA) Connection
Connect your display with a VGA cable and a stereo audio cable
The D-Sub connection
diagram
3.4 Composite ideo(A/ ) Connection
Connect your display with Composite Video cables
The Composite Video
connection diagram

8
4. MP30A OPERATION GUIDE
To start using VMP30A for photo/video playback, you have to check the 4 items below:
1 Make sure the power of your display is ON
2 Insert your memory card/flash disk with photos/videos into VMP30A
3 Turn VMP30A’s power ON
4 Switch your display to the correct source
4.1 Auto-Start
The VMP30A will automatically start playing the photos/videos/music on startup unless:
1 You did not select the correct output for your VMP30A
2 No memory card/flash disk inserted – You will see “No Device Present” shown on the
bottom-right of the screen
3 No playable file in your inserted memory card/flash disk – You will also see “No Device
Present” shown on the bottom-right of the screen
4 There are more than 1 storage device inserted – The VMP30A will prompt a device selection
screen for you to select the correct device
5 You disabled the Auto-Start feature in setup
4.1-1 Auto-Start Feature Setting
Press to enter the setup menu You will find the AUTO START setting under
[SETUP>PREFERENCES] There will be 4 options – OFF/PHOTO+MUSIC/VIDEO/ALL and you can
select one of them on your demand
O Disable the AUTO-START feature
PHOTO+MUSIC Plays photos with background music on startup repeatedly
VIDEO Plays video files on startup repeatedly
ALL Plays all contents in your memory card by alphabetical sequence on
startup repeatedly

9
4.1-2 Remote Controller functions on AUTO-Start
PHOTO+MUSIC
Press for previous photo or for next You can also press
once to stop the photo slideshow/twice to stop them both/thrice to
restart them both
You can bring up the Button Row on the bottom of the screen by
pressing
VIDEO/ALL You can press either / or any Navigation key to stop the video
and return to the Main Menu
Please note that are disabled under modes listed above

10
4.2 Main Menu
You can press anytime to return to the Main Menu
You can navigate by and press to select the mode:
Photo To browse your photos Chapter 4 3
Music To play your music files Chapter 4 4
Video To play your video files Chapter 4 5
ile To manage your files Chapter 4 6
Setup To setup various features of VMP30A Chapter 4 7
Device To select the memory card if you inserted more than 1 card Chapter 4 8

11
4.3 Photo Mode
The screen will show 12 thumbnails of your photos and you can select them by Navigation keys
Press to enlarge the selected photo to full-screen
The Hint Row will indicate how to access the action buttons on the Button Row
or example:
When you select the first photo(1) on the top-left corner, you will see
on the Hint Row That means you can access the
action buttons now by pressing
Please note that if you select the last photo on the bottom-right corner, the Hint Row will
show That means you have to press to access the
action buttons instead of pressing
Action Buttons
Next Page/File Previous Page/File
Music+Photo Slide Show Repeat Mode
Return to Previous Menu
Playing Modes
Browse all photos once Browse all photos repeatedly

12
4.3-1 Photo Playing Functions
When playing photos in full-screen:
Press to rotate the photo in 90° clockwise
Press to play next photo
Press to play previous photo
Press to pause/play
Press to bring out the Button Row and Hint Row as below:
Action Buttons
Next Page/File Previous Page/File
Play/Pause Rotation
Zoom Mode Information On/Off
Return to Previous Menu
When you select the Zoom function, you will see
Press after you select to switch the zooming rate between 1 5X/2X/3X
You can press and Navigation keys to move the zoomed photo Press again to leave

13
4.4 Music Mode
You can select the song by pressing and access the action buttons by pressing
Action Buttons
Next Page/File Previous Page/File
Music+Photo Slide Show Repeat Mode
Show/Hide Graphics EQ Return to Previous Menu
You can switch different playing modes by selecting then press The selected playing
mode will be shown on the Information Row as below:
Play all music once Play all music repeatedly
Play selected music repeatedly
Play all music randomly
You can also switch between different EQ modes by selecting and press Press to
bring out the EQ screen and you can switch between Standard/Classic/Jazz/Rock/
Pop/Folk/Dance by To leave the EQ screen, please press , select and press
1

14
4.5 ideo Mode
You can select the video by pressing and access the action buttons by pressing
To toggle the video preview function on/off by pressing to access the action buttons,
select and press
Action Buttons
Next Page/File Previous Page/File
Repeat Mode Preview On/Off
Return to Previous Menu
You can switch between different playing modes by selecting then press The selected
playing mode will be shown on the Information Row as below:
Play all videos once Play all videos repeatedly
Play selected video repeatedly
1

15
4.5-1 ideo Playing Functions
When playing videos in full-screen:
Press to control the volume or press to mute
Press to play next video
Press to play previous video
Press to pause/play
Press to bring out the Button Row and Hint Row as below:
Action Buttons
Next Page/File Previous Page/File
Play/Pause Fast Forward
Fast Backward Information On/Off
Return to Previous Menu

16
4.6 File Mode
You can select the song by pressing and access the action buttons by pressing
Action Buttons
Next Page/File Previous Page/File
Preview On/Off Return to Previous Menu
Destination Copy file
Delete file

17
4.6-1 Copying a file
or example:
You have CF card and SD card both inserted Now you want to copy the file “Photo001 JPG”
from the SD card to the CF card First, you have to select “DEVICE” at the Main Menu and you
will see the screen below
Select the “CF/Microdrive” and press
Enter the FILE Mode, press , select and press