Omron DST1 Series User manual

DST1-series
Safety I/O Terminals
DeviceNet Safety
DST1-ID12SL-1 Safety Input Terminal
DST1-MD16SL-1 Safety I/O Terminal
with Semiconductor Outputs
DST1-MRD08SL-1 Safety I/O Terminal
with Relay Outputs
OPERATION MANUAL
Cat. No. Z904-E1-01

DST1-series Safety I/O Terminals
Operation Manual
Produced April 2005

Notice
Notice
OMRON products are manufactured for use according to proper procedures by a
qualified operator and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this manual.
Always heed the information provided with them. Failure to heed precautions can result
in injury to people or damage to property.
WARNING
Indicates an imminently hazardous situation which, if not avoided, is
likely to result in serious injury or may result in death. Additionally,
there may be severe property damage.
WARNING
Indicates a potentially hazardous situation which, if not avoided, will
result in minor or moderate injury or may result in serious injury or
death. Additionally, there may be severe property damage.
CAUTION Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Indicates required actions.
Indicates prohibited actions.
OMRON Product References
All OMRON products are capitalized in this manual. The word “Unit” is also capitalized
when it refers to an OMRON product, regardless of whether or not it appears in the
proper name of the product.
The abbreviation “PLC” means Programmable Controller. “PC” is used, however, in
some Programming Device displays to mean Programmable Controller.
Visual Aids
The following headings appear in the left column of the manual to help you locate
different types of information.
IMPORTANT Indicates important information on what to do or not to do to prevent failure to
operation, malfunction, or undesirable effects on product performance.
Note Indicates information of particular interest for efficient and convenient operation
of the product.
1,2,3… Indicates lists of one sort or another, such as procedures, checklists, etc.
1

Trademarks and Copyrights
Trademarks and Copyrights
DeviceNet and DeviceNet Safety are registered trademarks of the Open DeviceNet
Vendors Association.
Other product names and company names in this manual are trademarks or registered
trademarks of their respective companies.
The copyright of the DeviceNet Safety DST1-series Safety I/O Terminals belongs to
OMRON Corporation.
© OMRON, 2005
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form, or by any means, mechanical, electronic,
photocopying, recording, or otherwise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained
herein. Moreover, because OMRON is constantly
striving to improve its high-quality products, the information contained in this manual is
subject to change without notice. Every precaution has been taken in the preparation of
this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the information
contained in this publication.
2

About this Manual
About this Manual
This manual describes the installation and operation of a DST1-series Safety I/O
Terminals (referred to as the DST1 in this manual).
Please read this manual carefully and be sure you understand the information provided
before attempting to install or operate the DST1. Be sure to read the precautions
provided in the following section.
The following manuals provide information on the DeviceNet and DeviceNet Safety.
Manual Products Contents Cat. No.
DeviceNet Safety
DST1-series Safety I/O Terminals
Operation Manual (This manual)
DST1-series
Safety I/O Terminals
Information on DST1-series
Safety I/O Terminals
Z904
DeviceNet Safety
System Configuration Manual
WS02-CFSC1-E Information on using the
Network Configurator
Z905
DeviceNet Operation Manual Describes the network configuration and connection
modes of a DeviceNet network. Also provides
details on connection methods, specifications, and
power supply methods to the communications
systems of connection devices, such as cables and
connectors.
W267
WARNING
Failure to read and understand the information provided in this manual
may result in personal injury or death, damage to the product, or
product failure. Please read each section in its entirety and be sure you
understand the information provided in the section and related sections
before attempting any of the procedures or operations given.
3

Read and Understand this Manual
Read and Understand this Manual
Please read and understand this manual before using the product. Please consult your
OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a
period of one year (or other period if specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING
NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE
PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on
which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS
REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS
WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
4