Omron XTRAWARE User manual

299XtraWare
Software
Programing Software for XtraDrive
XtraWare
Functions
Operating Enviroment
Compatible Units
Software
Cables
Specifications
System setting Setting communication parameters
Data input
- Editing of general parameters, position data, ramp up/ramp down, speeds etc.
- Program Editor
- Load, save, delete parameter files, etc.
Test options/Online operation
- Transfer and comparison of parameter data
- Variables Monitoring
- Immediate execution of control commands
Servo AutoTuning
Tools
- Setup Wizard
- Chart utility (Digital scope)
- Program Editor and Debugger
Mechanical Analysis (FFT)
Operating systems Windows 95/98/NT/ME/2000/XP
Processor Pentium class at 300 Mhz recommended
Memory requirements Hard disk 100 MB free memory space
RAM 64 MB min.
Screen 800x600 resolution or higher, minimum 256 colors
Peripheral connections CD-ROM Drive
RS232 or RS-422 serial port
Specification
Motion Controllers All XtraDrive Servo Drives
Ordering Information
Description Model
XtraWare MOTION TOOLS CD
Description Model
Computer Connecting cable R88A-CCW002P2
or JZSP-CMS02
Advanced software tool for the setup, optimal
tuning and user programming of the Xtradrive
Servo Drive
• User-friendly software tool that allows complete control
of the system
• Setup Wizard for an easy Drive setup
• Immediate execution of control commands
• Servo AutoTuning
• Alarm Display
• Parameters Setting
• Program Editor and Debugger
• Variables Monitoring
• Chart utility (Digital scope)
• Mechanical Analysis (FFT)
Y203-EN2-01.book Seite 299 Montag, 29. März 2004 12:52 12

300 Programing Software for XtraDrive
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. I32E-EN-01
Y203-EN2-01.book Seite 300 Montag, 29. März 2004 12:52 12