Omron ONE SOFTWARE - User manual

JUST CREATE
One Software
Our software solutions reduce complexity by providing an integrated environment enabling users to
design a modular automation system. Our concept is to provide ‘One Software’ that is simple and
easy to use. Through Smart Components our software embeds advanced knowledge to speed up
the entire process: development, commissioning and maintenance.
Check for more software:
www.omron-industrial.com
516
Software

517
Software
Software – Table of contents
Software 31
Product overview 518
Software CX-One 521
CX-Supervisor 522
CX-Server OPC 523
CX-Server LITE 523

Simulation Network
configuration
Controlling, Visualization, Positioning, Sensing and Regulation
A single software for programming controllers, HMIs, networks, motion controllers, drives, control units, switches and sensors
PLCs HMI terminals Process control
Configuration
via FDT
Temperature
controllers
Regulation
Software
NetworkProgramming
One Software
ONE SOFTWARE-ONE CONNECTION-ONE MINUTE
“One Software” is a key component of the overall vision of Smart Platform; Omron’s integrated automation
architecture. Our CX-One solution is based on a core architecture of open integration. This architecture not
only allows all our applications to share core data and project design, but also we enable open connectivity by
our reliance on key open standards such as FDT/DTM and OPC.
•Common graphic user interface
•One programming tool
•Control, visualise, position, detect and regulate
For more information visit:
www.smartplatform.info
One software for all your automation needs
518
Software

Operation and Monitoring
Motion control Drives Positioning Laser measuring
CX-Supervisor CX-Server LITE CX-Server OPC
Motion & Drive Sensing
519
31 Software

520

521
31 Software
CX-One Software
Integrated “One software” that covers all
your requirements for complete machine
automation
This single programming and configuration environment is an integrated software
management tool called CX-One that enables the user to build, configure and program
networks, PLCs, HMIs, motion control systems, drives, temperature controllers and
sensors. The result of a single software is to reduce complexity of the configuration
and allow automation systems to be programmed or configured with minimal training.
By registering a licence number at www.omron-industrial.com, users can benefit
from free upgrades to their version of CX-One. An automatic update service can notify
users as soon as relevant patches are available.
CX-One is available as as two types. FULL supporting all PLCs or LITE designed for
our compact PLC range. Thus our integrated "One Software" applies to our complete
portfolio.
Ordering information
Specifications
CX-One FULL Media Order code
Single licence Licence Only CXONE-AL01-EV_
Three user licence Licence Only CXONE-AL03-EV_
Ten user licence Licence Only CXONE-AL010-EV_
Thirty user licence Licence Only CXONE-AL030-EV_
Fifty user licence Licence Only CXONE-AL050-EV_
Site licence Licence Only CXONE-AL0XX-EV_
Software on CDs CD CXONE-CD-EV_
Software on a DVD DVD CXONE-DVD-EV_
CX-One LITE Media Order code
Single user licence Licence Only CXONE-LT01-EV_
Software on CD CD CXONE-LTCD-EV_
Subject Indicator Description
Programming CX-Programmer CX-Programmer provides one common PLC software platform for all types of Omron PLC controllers – from micro PLC's up to
Duplex processor systems. It allows easy conversion and re-use of PLC code between different PLC types, and the full re-use of
control programs created by older generation PLC programming software.
CX-Simulator A debugging environment equivalent to the actual PLC system environment can be achieved by simulating the operation of a
CS/CJ Series PLC with a virtual PLC in the computer. CX-Simulator makes it possible to evaluate program operation, check the cycle
time and reduce debugging time before the actual equipment is assembled.
CX-Designer CX-Designer is used to create screen data for NS-series Programmable Terminals. CX-Designer can also check the operation of the
created screen data on the computer. CX-Designer enables efficient development process for screen creation, simulation and project
deployment. Users can develop screens more efficiently with Easy-to-use Support Software. CX-Designer has about 1,000 standard
functional objects with associated graphics and advanced functions, so even first-time users can create screens easily just by
arranging functional objects in a screen.
Networks CX-Integrator CX-Integrator is the main configuration software for CX-One. It enables easy performance of many operations, such as monitoring
the connection status of various networks, setting parameters, and diagnosing networks.
CX-ConfiguratorFDT Based on FDT/DTM technology, CX-ConfiguratorFDT can be used to configure devices from any vendor connected to a PROFIBUS
network. This concept will later be expanded to support many more networks using this technology.
Motion & Drives CX-Motion CX-Motion can be used to create, edit, and print the various parameters, position data, and motion control programs (G code)
required to operate Motion Controllers, transfer the data to the Motion Control units, and monitor operation of the Motion Control
units. Increase productivity in every step of the motion control process, from development of the motion control program to system
operation.
CX-Drive The complete current range of Omron Yaskawa inverters and servos is covered in this software with full access to all parameters
(with 3 different operator levels available). An easy overview of parameters is also included which includes filters to show values
that are: different from default, different from inverter, invalid setting. Graphical overviews are available to further assist with
configuration of some more detailed parameters such as jump frequencies, v/f profiles and analog setting.
CX-Postion CX-Position simplifies every aspect of position control, from creating/editing the data used in Position Control units (NC units)
to communicating online and monitoring operation. The software is equipped with functions that can improve productivity, such as
automatically generating project data and reusing existing data.
Regulation and Switchting CX-ThermoTools CX-ThermoTools is a configuration and monitoring product for E5CN and E5ZN-series Temperature Controllers. It provides easy
setup, online data logging, and real-time monitoring. Users can easily create, edit, and batch-download parameters from a personal
computer, reducing the work required to set parameters. It is possible to monitor data for up to 31 Temperature Controllers at the
same time.
CX-Process CX-Process simplifies every aspect of loop control, from creating/transferring function blocks to running the Boards/units and
debugging (tuning PID parameters, etc.) operation. Function block programs can be created easily by pasting function blocks in the
window and making software connections with the mouse.
Sensing CX-Sensor CX-Sensor allows configuration and monitoring of Omron's ZX range of sensors via a series of easy to use displays. The graphing
dialog allows the outputs from several sensors to be reviewed and compared simultaneously, allowing configuration of complex
processes. The software also includes a driver that allows sensor data to be accessed via an Omron serial control unit (SCU) and
from other Omron applications such as CX-Supervisor. With the aid of Omron's CX-Server OPC application it is even possible to
monitor sensor data in real time from Microsoft Excel.

522
CX-Supervisor Software
Powerful Machine Visualisation
CX-Supervisor is dedicated to the design and operation of PC visualisation and
machine control. It is not only simple to use for small supervisory and control tasks,
but it also offers a wealth of power for the design of the most sophisticated
applications.
CX-Supervisor boasts powerful functions for a wide range of PC based HMI
requirements. Simple applications can be created rapidly with the aid of a large
number of predefined functions and libraries, and even very complex applications can
be generated with a powerful programming language or VBScript™. CX-Supervisor
has an extremely simple, intuitive handling and high user friendliness. Importing
ActiveX®components makes it possible to create flexible applications and extend
functionality.
CX-Supervisor now comes in two editions:
CX-Supervisor Machine Edition is the perfect choice for almost all machine
visualization requirements. Supporting connection of up to 15 devices and up to
500 user definable points (array = 1 point), it is flexible and powerful enough for the
control and supervision of a complete machine or an entire manufacturing process.
And its easy-to-use Windows®Explorer-style development environment makes
building the most sophisticated graphic interfaces simple.
CX-Supervisor PLUS is for those exceptional cases where an application demands
a higher number of devices or points than can be handled by CX-Supervisor Machine
Edition. It otherwise shares all of the same power and features.
Ordering information
Specifications
Description Media Order code
Developer & runtime (no protection included) CD CX-SUPERVISOR-V_ _
Developer upgrade (no protection included, requires licence of previous version) CD CX-SUPERVISOR-UPGR-V_ _
Machine Edition runtime including USB dongle protection CD CX-SUPERVISOR-RUN-ME-V_ _
PLUS Edition runtime including USB dongle protection CD CX-SUPERVISOR-RUN-PLUS-V_ _
Feature Supervisor
Machine Edition Plus
ActiveX Yes Yes
VBScript Yes Yes
Recipes Yes Yes
Alarms 300 3000
Animation Yes Yes
Max Devices (PLCs etc) 20 256
OPC Connections Yes Yes
Max Points 500 8000
Max Regular Interval Scripts 10 100
Max Num Pages 100 500
Databases supported MS Access MS Access SQL, ODBC, MS Access, MS Excel. dBase, CSV

523
31 Software
CX-Server OPC Software
Omron’s devices meet ‘Open Integration’
CX-Server OPC provides a connection between the industry standard OPC interface
specification and Omron's network architecture and controllers. CX-Server OPC
allows any OPC compliant client software to interface easily with Omron.
The multi-vendor connectivity and information exchange capability of CX-Server OPC
eliminates driver development issues.
CX-Server OPC includes an ActiveX OPC client control and a set of graphical
components. Linking the graphical controls can be done without a single line of
script. No programming knowledge is required!
Ordering information
CX-Server LITE
Simple but effective connectivity
As a pair to our OPC product, CX-Server LITE is designed to meet a wide variety of
programmers' needs from the simple to the advanced. Used to create PC-based sim-
ple HMI projects, CX-Server LITE allows designers of custom programs to send and
receive PLC data and manipulate controllers within Omron networks.
Based on ActiveX technology, it is easy to add a communications control to a VB
project or an Excel spreadsheet. Live data can be updated directly into a cell or range
of cells.
CX-Server LITE includes a set of graphical components designed to connect to the
communications control. Linking the graphical controls can be done without a single
line of script. No programming knowledge is required!
Ordering information
Description Media Order code
CX-Server OPC CD & Licence CX-OPC-EV_
Description Media Order code
CX-Server LITE CD & Licence CX-LITE-EV_