OmySalon SBWD-B User manual

Model# S B W D - B
ATTENTION! PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS DEVICE PRODUCT MANUAL
NOTICE: Thanks for your purchase. We hope you love it! If you enjoyed your shopping
experience, tell us (and others) about it! You could post an online review. This helps us to
continue providing great products. Thanks in advance!If anything we could do better, kindly
email us and we’ll try hard to solve the issue for you.
Email: [e-mail](Please kindly provide order number when you contact us.)
SAFETY
To reduce risk of injury when installing & using the bed, follow these precautions:
• Read all of these instructions before installing and using your salon bed.
• It is helpful to have 2 people install and turn the bed upright after installing.
• Do not over-extend the bed and the weight of person should not exceed 150KG, creating the
risk of falls or tipping the bed, and its occupant over, resulting in injury
OTHER ITEMS YOU WILL NEED (not included)
•Hand Tools:Wrench
Sturdy box
OmySalon Beauty Bed

PARTS & FEATURES
A
B
C
D
E
F
H
D
C
G
2

Installation instruction
FIRST：Install B to A
1.Remove 4 bolts which pre-fixed on B
2.Install B to A by 4 bolts which
removed from A
SECOND：Install C to A and B
1.Remove 6 bolts which pre-fixed on A
2.Install C to A by 6 bolts which
removed from A
B
A
C
C
A
B
3

THIRD：Install F to H
1. Remove 4 bolts which pre-fixed on A
and remove 2bolts which fixed on F.
2.Install F to A by 4 bolts which
removed from A .
3.Install H in the middle of F by 2 bolts
which removed from H.
FOURTH：Install G to C
1.Remove 4 bolts which pre-fixed on C
2.Install G to C by 4 bolts which
removed from C.
H
G
C
A
C
F
C
4

FIFTH：Install D to B and A
2: Install D to A
SIXTH：Install E to B and A
Put E in the bottle of seat(A) and in the
middle of F one by one .
D
D
E
A
E
F
A
5

Function description
Adjustment of backrest and seat
Adjusting the support bar on the two
supports to match the rack, which can
adjust the tilt of the backrest and the
Seat cushion
( Notice! When moving the
adjustment support rod, it must not
exceed the gear on both sides of the
rack)
6