ONAGO FLY ONAGOfly Series Mounting instructions

Firmware Update Guide
V1.0
For ONAGOfly Series Smart Nano Drone

Preparation:
Before you update the firmware, please prepare these tools below:
1. PC x 1 (For Win XP , Win7 32/64bit with .netframework4.0 installed)
2. Micro SD card(Max capacity 64GB, Class 10) x 1
3. USB to Micro-USB Cable x 1
4. Find and download the firmware kit from bbs.onagofly.org
a. ONAGOfly0630.bin
and unzip it. The kit includes these
files as below:
b. ONAGOfly0630.ong
c. ONAGOflySetup0630.msi
StepⅠ: UPDATE YOUR FLIGHT CONTROL SYSTEM.
a. Install ONAGOflySetup0630.msi Utility on your PC, and there is an “ONAGOflyDriver” icon
on your Windows Desktop(Figure 1) after the installation.
Figure 1
b. Connect your PC and your Drone with the USB to Micro-USB Cable.
Figure 2
c. Run ONAGOflyDriver Utility, and press the “load” button(figure3) to load the
“ONAGOfly0630.ong” file.
Figure 3
d. You need to re-plug the cable on the board and click “OK” to wait for the update(Figure 4).

It will take about 40 seconds for the update process(Please don’t shut down your
computer during the update).
Figure4
e. Click “OK” button, and congratulations! Your flight control firmware has been upgraded to
the latest version(Figure 5).
Figure5
Step Ⅱ: UPDATE YOUR CAMERA SYSTEM.
a. Format your Micro-SD Card to FAT or FAT-32 format, and load the “ONAGOfly0630.bin” file
into the Micro-SD Card.
b. Insert the Micro-SD Card with “ONAGOfly0630.bin” loaded into the Drone.
c. Power it on. Different from the normal power on process, there are no beep and no LED
light blink during the update. The update will continue for 40 seconds until the LED lights
turn on. Congratulations! Your camera system firmware has been upgraded to the latest
version.
d. Power it off and remove the Micro-SD card. If you want to use the current Micro-SD on
ONAGOfly, please remember to delete theONAGOfly.bin file or format the card on your
computer first.
FAQ
1. Q: Why my computer can’t install ONAGOflyDriver Utility?
A: ONAGOflyDriver Utility support Microsoft Win XP and Win7 32/64bit, and it don’t support
Win8 32/64bit, Win10 and Macbook now. You can download and install Microsoft .NET
Framework 4 first(https://www.microsoft.com/en-us/download/details.aspx?id=17851), and
then install ONAGOflyDriver Utility.

2. Q: Why ONAGOflyDriver Utility can’t find ONAGOfly after I install ONAGOflyDriver Utility and
connect ONAGOfly with USB to Micro-USB Cable?
A: You can find ONAGOfly in Windows Device Management if you successfully install the
ONAGOflyDriver Utility. If you still can’t find the device, please check or change “the USB to
Micro-USB cable” and try again.
3. Q: When I update the “ONAGOfly.ong” file, the computer is down suddenly and the upgraded
process is interrupted. What can I do for it?
A: You can restart the computer and restart the upgraded process.
4. Q: Do I need to update the Application in my mobile device after I update the firmware?
A: Yes, we recommend the user to update the Application to the latest version too.
The content is subject to change.
If you have any questions for the document, please send message to [e-mail].
@2016 ONAGOfly. All Rights Reserved.