Speaker key operation manual for ONEmicro, ONEmini, ONEmedi
When the speaker is in standby mode (non-playing, blue LED is on), you can enter speaker menu by holding
[+] key for 2 second.
A. Change speaker volume (control speaker group volume):
When speaker is playing music (play mode), press [+] and [-] key to change volume
:volume up
: volume down
B. Check speaker battery level
You can hear the speaker battery level and speaker setting in the “Report Status”menu at first page. A
voice prompt will report : battery level, position, connection status, sound character, tweeter gain, left
right balance and power mode. If speaker battery level is lower than 20%, battery level will automatically
report at every time speaker is turned on.
C. Change speaker connection to transmitter
Each speaker can pair up to 3 transmitters. If your speakers have been paired with more than 1 transmitter, the
“Change Connection”menu can help you to switch your speaker connection. Set to ‘auto’ the speaker will search
available transmitter automatically or set to manual connection to particular transmitter.
Tips : Don’t power on 2 transmitters at the same time if speaker search mode is set to ‘auto’.
D. Set power mode
* ECO mode : offers ~25% longer play time, ONEmedi is not support
* Standby mode : ONEmicro is not support
Transmitter power off, speaker in searching
Auto power off when it
has idled for 15 min
Auto power off when it has lost transmitter
connection for 5 min
Always in searching transmitter
Press and hold both [+] and [-] for 2 seconds to reset
speaker pair volume to default level
