Oneida Air Systems SMK180000 User manual
oneida-air.com1-800-732-4065
Rev: 02/08/2019 Doc. #ZBI010018
Wall Bracket
V-Systems
# SMK180000
INSTRUCTION SHEET
ID Part number Part description Qty
A SMS180000A V-System Wall Bracket 1
B AHX180000 Wall Bracket Hardware Pack 1
B1 AFT900516 5/16"-18 Nylock Nut 8
B2 AFW180000 5/16" Flat Washer 8
Please unpack the parts carefully and conrm you have
received each item listed here.
You will need the following:
• Wall Mounting
Hardware i.e. Concrete
Anchors, Lag Screws,
• 1/2" Wrench
• 1/2" Socket Wrench
• Stud Finder
• Level
• 2x4
• Pencil
• Drill
System Contents
oneida-air.com1-800-732-4065
Locate the studs on the wall that you plan on
mounting the system. Hold bracket against wall
so that the top of plate to the oor measures at
54" (35 gallon drum) or 68" (55 gallon drum). It
may mount higher, but you will need additional
ex hose for the cyclone to the drum. Mark
where mounting holes land.
Note: For wall mounting, the bolt centers on the
brackets are at 16" to accommodate most wall
stud spacing. See [FIG. 1] for full dimensions.
1
3When installing the system where the lter or
the inlet will be parallel with the wall [FIG 3a],
or mounting to a concrete wall, you must mount
additional spacing between the wall and the
bracket [FIG 3b]
Note: e additional spacing (i.e. multiple 2x4’s)
helps to stabilize and dampen vibration. e
collector will seem quieter if the outlet is aimed
away from where people tend to work.
FIG. 2
Attach bracket to wall with mounting hardware.
Slots in the brackets are 1" x 13/32" [FIG 2].
2
FIG. 1
Assembly Instructions
23.5"
597 mm
16"
406 mm
16”
406 mm
1" x 13/32"
25 mm x 10 mm
FIG. 3a FIG. 3b
4Aligned the Cone and Barrel’s Flange with the
angle ring of the wall bracket.
Secure both components to the wall bracket
using eight Hex Head Bolts, sixteen 5/16” Flat
Washers, and eight Nylock Nuts. [FIG 4]
Note: Tighten rmly but do not over compress the
gasket. Extra hardware is vincluded to mount
wall bracket to collector
FIG. 4
B2
B1 A
Barrel
Cyclone
Hex Head Bolt
Cyclone
INLET
WALL
Table of contents
