ATTENTION! PLEASE READ THIS MANUAL BEFORE USING AIR DUSTER GUN (TOOL).
IMPROPER USE OF TOOL MAY CAUSE INJURY AND/OR PROPERTY DAMAGE!
ONLY QUALIFIED AND SPECIALLY TRAINED PERSONNEL FAMILIED WITH THESE INSTRUCTIONS IS ALLOWED TO USE AND
MAINTENANCE OF THE TOOL.
This manual contains description, safety rules and all the information necessary for the correct use of the spray gun.
The safety advice given in this manual is in addition to and does not replace the general safety regulations applicable in the
region where the tool is used.
➢Air passing through the hose can build up static electricity. Static electricity can create a fire or explosion
hazard.
GENERAL RULES OF OPERATION
•When working with the tool always use personal protective equipment appropriate for the type of work performed (goggles,
impact resistant glasses, hand protection, body, etc.);
•The employee's appearance must comply with safety requirements;
•Use tool only for its intended purpose;
•Observe grounding rules in the workplace;
•To ensure maximum performance and durability of the tool, the working pressure of the compressed air should be set
at 3.5 bar;
•High noise levels can cause hearing loss. Timely maintenance will help avoid an increase in noise levels;
•The flow of compressed air can cause serious injury. Never direct the air flow towards yourself or others. Do not use
compressed air to clean clothes;
•Before starting work, check the compressed air supply hose for damage, wear or other defects. Replace immediately if found;
•Check screw connections before starting work. Tighten if necessary;
•Do not carry the tool by the compressed air supply hose;
•Always disconnect the tool from the compressed air line before performing maintenance;
