4.3.8 Setup Home Stay Arm Zones
4.3.9 odify Zone NameM
4.3.10 Check Sensors’ Status
1. Enter into sensor management interface,
click the icon of home stay arm.
1. Click related host to get into
users management interface.
1. Enter into sensor management
interface, choose the zone.
1. Click into sensor management
interface,choose the zone.
2. In pop up window, switch to
OFF status and confirm.
2.Click related icons to check alarm messages.
Click ‘Delete Alarm’ to delete all the red bubbles.
1. Intrusion detectors (Door sensors, motion sensors etc) will only trigger the alarm when the
host is in arm status. Other detectors (SOS/ Medical call/ Water leakage) will directly trigger
the alarm regardless of its status.
2. In home stay arm status, the switch of intrusion detectors will turn on in order for the
alarms to be triggered. (The default for newly added detectors is home stay. The user can
modify the zones types, for details please refer to 4.4.8).
3. If a sensor has triggered the alarm, a red spot will appear on the sensor management
interface. Other alarm messages such as power failure and the operating record can be located
in 'Alarm Records', a red spot will appear here too. To clear these, you can either check the
notification or press 'clean' to delete the records.
4. The app is able to alter the sound/ music for each individual alarm notification.
5. There is an option to turn on the 'GSM network breakdown, app push message alert' function.
If the host detects an issue with the GSM network, the app will automatically alert all users.
6. There is an option to turn on the 'Wi-Fi network breakdown, auto change to GSM network'
function. If the Wi-Fi fails, the host will send 3 SMS reminders to the phone numbers provided.
7. When detectors such as door/window, PIR, smoke and water leakage are disconnected using
the alarm host, the app will push alert messages (without the use of SMS) and the related icon
will appear in grey on the sensor management interface.
8. When detectors such as door/window, PIR, smoke and water leakage reach low battery, the
app will show a low battery icon in the sensor management interface and will push alerts every
two hours. This function can be turned off
9. A window or doors open/closed status can be checked prior to arming using the app. If it is
not closed properly once the host has been armed, the app will push an alert message and the
sensor management interface will list an open status icon.
2. In pop up window, input new name,
for example, “Front Door Alarm”.
2.The management interface of
door/window sensors.
After set up, the sensors are not in
home stay status. Please note: home
stay prevents the alarms from being
triggered when indoors.
3.Modified successfully.
Note: All new added sensors are in home stay mode, the following steps can cancel this.
Door/window open
Door/window sensor disconnected
Door/window closed Door sensor low battery
4.3.11 Check Alarm Records
4.3.12 Handling app alarm messages and precautions
15
14
Gate
Detector 001
Front
Door Alarm
Detector 003 Detector 004
As t he image shows: there
are two unread water
le akage alert messages.
3
3
Red point: the number of unread
alarm records.
12
12
Cl ick here to check all the ho st
al arm records.
2
