4
1. Connect power cable and signal output cable and press POWER switch button on the front panel. Load
shall be displayed on the screen. If there is disc in the machine, screen shall display total tracks and time after a few
seconds. If there is no disc, screen shall display No Disc . Press POWER switch button again to turn of
the machine.
2. If the machine is not used for a long time, please unplug AC power cable of the machine.
Power on/off
Play the disc
1. Press button on the front panel. Disc loader shall open automatically.
2. Load the disc on tray with the labeled or printed side on top. Press button on the front panel. Disc loader shall
close automatically.
3. Once the loader is started, screen shall display total tracks and time.
4. Press button on machine or key on remote control to play all contents on the disc.
Previous / Next
1. During normal playback, press button on front panel or key on remote control to play the previous
track.
2. During normal playback, press button on front panel or key on remote control to play the next track.
Repeated play
1. To continuously play tracks of the current disc, press key on remote control once. Screen shall display
T in front of the total track. To continuously repeat play tracks of the entire disc, press key on remote
control again. Screen shall display A in front of the total track. To cancel repeated play function, press
key on remote control again. Screen shall display normally.
2. This key is not functional if pressed when the disc is stopped.
A-B segment repeated play
1. Press A - B key on remote control at the start point of your desired content. Screen shall display A - in
front of the track. Press A - B key again at the stop point of your desired content. Screen shall display A -
B in front of the track and the machine shall repeatedly play the segment between start point A and stop
point B until A- B key is pressed again to cancel segment play.
2. This key is not functional if pressed when the disc is stopped.
