Onkyo HT-S3100 Specification sheet

Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD player,TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
See the other side of this sheet
for the AV component hookup.
HTP-360 speaker package is shown
First of all,
turn on speaker set A.
Press the SPEAKERS [A] button on
the front panel. Make sure that speaker
indicator A is shown on the display.
Turn off speaker set B when not in use.
Indicator should be off.
Speaker Set A Layout (Main Room)
Front
Left
Surround
Left
Surround
Right
Listener
TV
Sub woofer
Front
Right
Center
Speaker Set A Hookup
BA
A SPEAKERS B
SN 29344694
(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
* 2 9 3 4 4 6 9 4 *
QUICK SETUP
Model : HT-S3100/HT-S3105
RED/BLACK
CABLE
PURPLE/BLACK
CABLE
Subwoofer
Front left speaker
WHITE/BLACK
CABLE
Front right speaker
GREEN/BLACK
CABLE
Center speaker
BLUE/BLACK
CABLE
Surround left speaker
GRAY/BLACK
CABLE
Surround right speaker

Cable/satellite
VIDEO
OUT
AUDIO
OUT
L
R
DIGITAL
OUT
OPTICAL
DVD player
VIDEO
OUT
AUDIO
OUT
DIGITAL
OUT
COAXIAL
TV
VIDEO 1
IN
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
Antenna input
(e.g..RF IN)
Coaxial feed from
TV antenna
A TV, DVD player, and cable/satellite receiver is used in this hookup example.
See the Instruction Manual for how to connect other types of components.
L
R
Assigning the Digital Input
If there's no sound, press the [DIGITAL INPUT]
button repeatedly until sound is heard. The digital input is
now properly assigned.
If you connect your DVD player to the AV receiver's
COAXIAL DIGITAL IN, and your cable/satellite receiver
to the OPTICAL 1 DIGITAL IN, as shown, it's not necessary
to assign the digital input.
On the
front panel
See the other side of this sheet for the Speaker hookup.
DIGITAL INPUT
AV Component Hookup