Onkyo HT-S4100 Specification sheet

TX-SR304
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD player,TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
First of all,
turn on speaker set A.
Press the SPEAKERS [A] button on
the front panel. Make sure that speaker
indicator A is shown on the display.
Turn off speaker set B when not in use.
Indicator should be off.
Speaker Set A Layout (Main Room)
Front
Left
Surround
Left
Surround
Right
Listener
TV
Sub woofer
Front
Right
Center
Speaker Set A Hookup
BA
A SPEAKERS B
SN 49344693(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
See the other side of this sheet for the AV component hookup.
* 4 9 3 4 4 6 9 3 *
QUICK SETUP
Model : HT-S4100
RED/BLACK
CABLE
Front left
speaker
WHITE/BLACK
CABLE
Front right
speaker
GREEN/BLACK
CABLE
Center
speaker
BLUE/BLACK
CABLE
Surround left
speaker
GRAY/BLACK
CABLE
Surround right
speaker
Powered
subwoofer

TX-SR304
Cable/satellite
VIDEO
OUT
AUDIO
OUT
L
R
DIGITAL
OUT
OPTICAL
DVD player
VIDEO
OUT
AUDIO
OUT
DIGITAL
OUT
COAXIAL
TV
VIDEO 1
IN
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
Antenna input
(e.g..RF IN)
Coaxial feed from
TV antenna
A TV, DVD player, and cable/satellite receiver is used in this hookup example.
See the Instruction Manual for how to connect other types of components.
L
R
See the other side of this sheet for the Speaker hookup.
Assigning the Digital Input
If there's no sound, press the [DIGITAL INPUT]
button repeatedly until sound is heard. The digital input is
now properly assigned.
If you connect your DVD player to the AV receiver's
COAXIAL DIGITAL IN, and your cable/satellite receiver
to the OPTICAL 1 DIGITAL IN, as shown, it's not necessary
to assign the digital input.
On the
front panel
DIGITAL INPUT
AV Component Hookup