Onkyo HT-S6200 Specification sheet

Front
high right
speaker
(Optional)
Speaker Layout (Main Room)
Front
Left
Surround
Left
Surround
Back
Left
Surround
Back
Right
Surround
Right
Listener
TV
Sub woofer
Front
Right
Center
Front
Left
Surround
Left
Surround
Back
Left
Surround
Back
Right
Surround
Right
Listener
Front
Right
Center
Sub woofer
TV
Front High
Left
(Optional)
Front High
Right
(Optional)
Surround right
speaker
Surround left
speaker
Surround back
left speaker
Surround back
right speaker
Powered
subwoofer
Front
left
speaker
Front
right
speaker
Center
speaker
Front
high left
speaker
(Optional)
SN 29344939(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.
See the other side of this sheet for the AV component hookup.
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD/BD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
QUICK SETUP
Model : HT-S6200
* 2 9 3 4 4 9 3 9 *
Speaker Hookup
· HTP-670 speaker package is shown.
· When you connect the front high left and right speakers, preparate it
separately, or use the surround back left and right speakers.
3/8''-1/2'' (10-12mm)

TV
VIDEO 1
IN
Cable/
satellite
VIDEO
OUT
AUDIO
OUT
L
R
Antenna input
(e.g..RF IN)
DVD
player
VIDEO
OUT
AUDIO
OUT
DIGITAL
OUT
COAXIAL L
R
COAXIAL
DIGITAL
OUT
TV
HDMI
IN
HDMI
OUT Antenna input
(e.g., RF IN)
Cable/satellite
HDMI
OUT DVD/BD player
TV
VIDEO 1
IN
AV Component Hookup
IF NO HDMI
See the other side of this sheet for the Speaker hookup.
If your TV or player doesn’t support HDMI, use the analog or digital
connections shown below.
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.
Assigning the Digital Input
If there’s no sound, you’ll need to assign the
digital inputs as necessary using the setup
menus on the AV receiver’s display.
If you connect your DVD player to the AV
receiver’s DIGITAL IN COAXIAL 1, and your
cable/satellite receiver to the DIGITAL IN
COAXIAL 2, as shown, it’s not necessary to
assign the digital input.
On the front panel
With an HDMI cable you can send both audio and video with a single cable,
making connecting simple and keeping wires neat.
If you have an HDMI-compatible TV and players, you can connect them
to the AV receiver with HDMI cables. Digital audio signals received
at HDMI IN input are output by the speakers and headphones connected
to the AV receiver.
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.
Connecting a supplied UP-A1 with the Port connector
Make a connection with the MONITOR OUT V when you watch videos on the TV.