Onn AAABLK100008726 User manual

Digital Clock Radio
We’d love to hear from you. Scan with you Walmart
app and let us know what you think.
PRODUCT GUIDE
Model: AAABLK100008726
January 16, 2020_V1

January 16, 2020_V1 January 16, 2020_V1
Overview
Need help?
We’re here for you every day
from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630
Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized
or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement
of the obsolete outlet.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
FCC Warnings
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• Mains plug is used as disconnect device and it should
remain readily operable during intended use. In
order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected
form the mains socket outlet completely.
• Caution marking is located at the rear or bottom of the
apparatus.
• WARNING: To reduce the risk of fire or electric shock,
do not expose this apparatus to rain, moisture,
dripping, or splashing.
• CAUTION: Use of controls or adjustments or
performance of procedures other than those specified
may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
• WARNING: Do not place this unit directly onto furniture
surfaces with any type of soft, porous, or sensitive
finish. As with any rubber compound made with oils,
the feet could cause marks or staining where the feet
reside. We recommend using a protective barrier such
as a cloth or a piece of glass between the unit and the
surface to reduce the risk of damage and/or staining.
• CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
• WARNING: Shock hazard - Do Not Open.
• Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Keep new and used batteries away from children. If the
battery compartment does not close securely, stop
using the product and keep it away from children.
• WARNING: DO NOT INGEST BATTERY, CHEMICAL
BURN HAZARD. If you think batteries might have been
swallowed or placed inside any part of the body, seek
immediate medical attention.
• If the coin/button cell battery supplied with this
product is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
• Completely replace all old batteries with new ones.
• Batteries should be recycled or disposed of as per
state and local guidelines.
Information and Safety Instructions
Clock/Mem
In O mode, press
and hold to begin
setting the time.
In Radio Mode,
press
to cycle through
preset stations.
Power/Source/
AL O
Press to turn the
unit on.
Press and hold to
turn o the radio.
Press to turn
o the alarm.
Press repeatedly to
select AM, FM.
Snooze/
Sleep
Press to
snooze the
alarm after
it sounds.
Press
repeatedly
to set
the sleep
timer.
Alarm 1: Buzzer/
Radio Indicator
Lights when the
alarm 1 is on and
set to buzzer or
radio.
Alarm 2: Buzzer/
Radio Indicator
Lights when the
alarm 2 is on and
set to buzzer or
radio.
Volume/
AL1/AL2
Press to
adjust
the volume.
Press to
begin
setting
Alarm 1 or
Alarm 2.
PM Indicator
Lights when
the time is in
the PM.
LED Display
Dimmer
Press to dim
the display.
Tuning/Min/
Hour
Press to tune
the radio.
Press to adjust
the minute
or hour when
setting the
clock or alarm.
AC In (side)
Speaker (side)
To power the unit using battery power, insert 2
AAA batteries (not Included). The battery backup
is intended for short power outages only. The clock
radio’s primary functions cannot run on battery
backup alone.
To power the unit, plug the AC adaptor on the
back of the unit into a standard power outlet.
Note: Do not mix old and new batteries and Do not mix
alkaline, standard (carbon-zinc) or rechargeable (ni-cad,
ni-mh, etc.) batteries.
Power & Batteries

January 16, 2020_V1
Clock & Sleep Timer
Alarm
Tuning the AM or FM Radio
1. Press the Power/Source/Al O button to
turn the clock radio on.
2. Press the Power/Source/Al O button
again to switch between AM and FM Radio
Mode.
3. Press the Tun+/- buttons to adjust the radio
to the desired frequency.
4. Press and hold the Tun+/- buttons to
search for the next available frequency.
5. Press the Vol+/- buttons to adjust the
volume.
6. Press and hold the Power/Source/Al O to
turn the radio o.
Radio
Setting the Clock
1. If in Radio Mode, press and hold the
Power/Source/Al O button to
turn the unit o.
2. Press and hold the Clock/Mem button until
the display begins to blink, then release
the button.
3. Press the Hour button to adjust the hour.
The PM indicator will light when the hour is
set in the PM.
4. Press the Min button to adjust the minute.
5. Press the Clock/Mem button to finish
setting the time.
Setting the Sleep Timer
Note: There may be up to a 1 minute deviation in
the sleep timer.
1. Press the Snooze/Sleep button repeatedly
to set the sleep timer ( 90, 80, 70, 60, 50, 40,
30, 20, 10 or OFF ).
2. Once the set sleep time has expired the
clock radio will automatically power o.
Setting the Alarm
1. If in Radio Mode, press and hold the Power/
Source/Al O button to turn the unit o.
2. Press the AL1 or AL2 button until the display
begins to blink.
3. Press the Hour button to adjust the hour.
The PM indicator will light when the hour is
set in the PM.
4. Press the Min button to adjust the minute.
5. Press the AL1 or AL2 buttons repeatedly to
switch between Radio and Buzzer.
6. Once the set alarm time is reached, the
alarm will sound.
7. To set the other alarm, follow the above
steps and choose the alarm not currently
set.
Disabling the Alarm
• Press the AL1 or AL2 buttons repeatedly until
the indicator is no longer lit.
Saving and Tuning to a Station as
a Preset
1. Tune to the desired station.
2. Press the Clock/Mem button to cycle
through preset radio stations.
3. Press Tun+/Tun- to select which preset
you want to save the station to. Up to 10
stations can be saved.
4. Press the Clock/Mem to save selected
station.
5. To cycle through presets press the Clock/
Mem button and press the Tun+/Tun- to
select which preset you want to listen to.
Radio Reception
A wired FM antenna is built into the clock radio and
exits from the rear of the unit. To improve radio
reception, adjust the position of the antenna, or if
need be, adjust the position of the clock radio.
Snooze and Alarm Reset
After the alarm sounds:
• Press the Snooze/Sleep button to delay the
alarm for several minutes.
• Press the Power/Source/Al O button to
turn the alarm o until the set alarm time is
reached again.