NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without
further notice to a product described herein to improve reliability,
design, packaging or function.
User’s Guide
Check the package and make sure you have everything:
Contents
(1) DPHS Splitter
(2) +12V DC Power supply x 1pc
(3) AC 220V Power cord x 1pc
(4) User’s Guide
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
Check your package Installation
Installation Steps:
1. Connect a source device to DPHS input port.
2. Connect sink devices to DPHS output port.
3. Slide the switch to select the input port.
4. Connect the included +12V DC power supply into the DPHS.
5. LED indicators will be light up after all connections are completed.
DC +12V
Power Jack
Input Selection
Switch