Ophit HDMB2 User manual

Thank you for purchasing HDMB2.
HDMB2, 4K HDMI 2.0 fiber optic cable, is designed to let 4K@60Hz UHD HDMI signal extends up to 40 meters
away from host by optical transmission technology.
www.ophit.com
User’s Guide
4K HDMI 2.0 Fiber Optic Cable
HDMB2

NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without
further notice to a product described herein to improve reliability,
design, packaging or function.
User’s Guide
Check the package and make sure you have everything:
Contents
(1) HDMB2 cable–4K DisplayPort fiber optic cable
(2) +5V DC Power supply x 1pc
(3) HDMI copper cable 1pc
(4) User’s Guide
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
Check your package Installation
Installation Steps:
1. Connect the HDMB2 transmitter(TX) to DisplayPort source device.
2. Connect the HDMB2 Receiver(RX) to Display device with copper
cable which is included.
3. Connect the included +5V DC power supply to HDMB2 transmitter.
4. Blue LED indicator on the TX module will be light up after all
connections are completed.
※Be careful not to connect TX and RX cable to the opposite direction.
※Use DP to Mini DP or HDMI/DVI adapter to connect HDMB2 is
not guaranteed.
Receiver
Transmitter

User’s Guide
Trouble shooting Application
HDMB2 cable may not be compatible with some of graphic cards.
Please follow the troubleshooting steps below.
Please check that blue LED light of TX module are on.
- If LED light was off,
1) Please re-connect +5V DC power supply of HDMB2.
- If there is no display when TX side of LED light are on,
1) Please re-connect TX and RX connector of HDMB2.
2) Please reboot monitor.
Please contact manufacturer if problem are still not fixed after
troubleshooting.

We, OPHIT hereby warrant the final purchase of our product as follows.
In the case of troubles on our products, please contact the shop purchased.
One year limited warranty
Our customers have right to be served with free of charge when there is trouble in this product during 1(one) year from the day purchased.
Out of warranty services
When you request services (in the case of non manufacturing defects but the troubles by misusage), may served with charge as follows.
- Defects of products caused by accident, disaster.
- Damages of products caused by the customer’s carelessness or mistaken application.
- Damages of products caused by the application of the parts or products not supplied or sold by our company.
- Damages of products and related defects caused by not our staff or the men or group not nominated by us for services.
The interchanged parts and products for maintenance services shall be replaced as new parts and products operating
normally, and the inter-changed parts and products shall be subjected to our company.
Warranty
www.ophit.com

RMA Request Form
Customer Name: Return Date:
Company Name: Phone:
Model Name: E-Mail:
Serial No: Place of Purchase:
Address: (For RMA Return)
RMA details: (Please describe RMA status, application used and failure symptom)
RMA No.:
www.ophit.com

Technical and Sales Support
REV. 1.0
USA
Foreseeson Custom Display
2210E, Winston Road Anaheim,
CA 92806 USA
Tel: [phone]
Fax : [phone]
E-mail: [e-mail]
KOREA HQ
OPHIT CO., LTD.
3F Suntechnovil 77, Deogyeong-daero 1471beon-gil, Yeongtong-Gu, Suwon-City,
Kyunggi-Do, Korea (16681)
Tel: + 82 (0)31 695 5543
Fax: + 82 (0)31 695 5545
E-Mail
[email protected]
Europe
Foreseeson GmbH
Industriestrasse 38a
63150 Heusenstamm, Germany
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
UK
Foreseeson UK Ltd
Unit 2Kingsmill Business Park, Chapel Mill Rd.
Kingston Upon Thames, Surrey; KT1 3GZ; UK
Tel : [phone]
Fax : [phone]
E-mail: [e-mail]
www.ophit.com
© 2016 OPHIT CO., LTD. All rights reserved.
Printed and designed in Korea
Regional Office