Ophit OPHD-H102 User manual

HDMI SPLITTER
OPHD-H102
OPHD-H104
OPHD-H108
USER’S manual

Table of Contents
1. Introduction ……………….....................................…2
2. Features ….…………………….............………………....2
3. Model name …………...............………………….………2
4. Panel Descriptions …..............………………….………3
5. Package contents .……….............…………….……….3
6. Installation .………………............……………………….4
7. Specification ………………………..............……………..5
8. Precaution .……………………………..............………….6
9. Warranty .……………………………...…............……….7
10. Contact us..............................................................8
www.ophit.com 1

Introduction
2
OPHIT’s HDMI distributor system(OPHD-Hx) let your one digital video
signal (Set-Top box, DVD Player and PC) with HDMI output distributes
into 2,4,8 digital displays such as PC monitor, HDTV(LCD,PDP) and
Projector.
•Connects 2, 4, 8 HDMI output ports at the same time to one HDMI input ports
•Compliant with HDMI 1.3 and HDCP Rev 1.1
(High bandwidth Digital Content Protection)
•Supports up to 1080p, WUXGA(1920x1200) resolution
•Support Deep Color
•Supports conversion of HDMI signaling to DVI signaling
•LED Indicator : Output status LED
Features
Model Name
OPHD-H102
www.ophit.com
OPHD-H104
OPHD-H108
HDMI Input : 1 / HDMI Output : 2
HDMI Input : 1 / HDMI Output : 4
HDMI Input : 1 / HDMI Output : 8

Panel Descriptions
3
Package contents
Before installing OPHD-Hx series, please check the package contents.
•HDMI Splitter (OPHD-H102/OPHD-H104/OPHD-H108)
•Power Adapter:
- OPHD-H102/OPHD-H104 : +5V, 2A DC
- OPHD-H108 : +12V, 3.33A DC
•User’s Manual
www.ophit.com
Panel Descriptions
Output LED
indicator
Power LED
indicator
HDMI OutputHDMI Input
EDID Switch (for factory setting only)
Power port

Installation
4 www.ophit.com
Installation
1. Connect your source (DVD,PC,PS3..) to the Splitter’s input port.
2. Connect up to 8 displays (TV, Monitor, Projector) on the
output ports.
3. Plug the adapter.
4. Check if all LED blink once.
5. Connected output’s green LED is on.