opticis Stretch LHM2-P Series User manual

Preliminary
User Manual
LHM2-Pxxx
Doc No. : OEC-H210910-L2 / Ver 1.0
Stretch HDMITM
HDMI 2.0 Detachable
Active Optical Cable

Manual Contents
______________________________________________________
Manual Contents 1-0
Welcome!, Product Description 1-1
System Requirements for Setup 1-2
Installation 1-3
Troubleshooting, Maintenance, Technical Support 1-4
Product Specifications 1-5
Warranty Information 1-6
1-0 Manual Contents
Welcome!
Product Description
Congratulations on your purchase of the Stretch HDMITM LHM2-Pxxx,
Detachable Active Optical Cable for HDMI 2.0. This manual contains
information that will assist you in installing and operating the product.
OPTICIS active optical HDMI 2.0 cable, LHM2-Pxxx is designed for critical
display applications that demand flawless HDMI signal integrity and it
provides transparent signal transmission over plenum graded, LSZH graded,
or TPU hybrid cable.
It enables to deliver 4K DCI (4096x2160) at 60Hz signal up to 100m (384ft). It
avoids any scaling or data compression for lessening a burden of data
transmission.
LHM2-Pxxx offers perfect flexibility during installation by separating HDMI
connector part and Active Optical Cable part. It gives slim, light, easy
installation like a general copper HDMI cable.
LHM2-P is powered by external 5V micro USB power supply cable
Shipping Group
LHM2-Pxxx, Active Optical Cable: One (1) unit, length as you
inquire.
5V Micro Power Supply
User Manual
Optional:
HDMI M/F to USB AM, 540mm
1-1 Welcome, Product Description

System Requirements for Setup
Hardware requirements
You must have a HDMI display source (Media player, PC or
laptop). It should support the maximum graphic resolution
feature of Display (TV, Monitor or Projector) to be connected.
No special requirements memory size, CPU speed and
chipsets, if you’ve already properly installed your HDMI
systems.
Software requirements
No special restrictions, if you’ve already properly installed your
HDMI / DVI systems.
AC/DC Power Adapter Technical Advisory
The LHM2-Pxxx is designed to use +5V internal power supplied
through a HDMI pin (#18) on the graphic source port. However,
LHM2-Pxxx requires USB power supply on RX side to power up.
Note that if either of Display source or Display does not support
HDMI 2.0 standard, LHM2-Pxxx would not transmit HDMI 2.0 signal.
Just like copper cable, transmitting information will follow lower
resolution of the two.
(Example: 4K Display source –2K Display → 2K resolution,
2K Display source –4K Display → 2K resolution)
Warning
Do not connect micro HDMI connector, which is place on the end
part of core cable, directly to any micro HDMI receptacle other than
LHM2-Pxxx body part. Using micro HDMI connector without LHM2-
Pxxx connector will damage cable and/or HDMI devices.
1-2 System Requirements for Setup
Installation
Important: Please use the installation procedure below. Improper or no
operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Connect both connector and cable of LHM2-Pxxx if they are not engaged with
each other.
Step 3
Power ON the body connector by using the micro USB power supply provided.
Step 4
Directly plug the TX side into the HDMI receptacle of HDMI source without
powering up of the devices.
Step 5
Plug the RX side into the HDMI receptacle of a HDMI Display.
Step 6
Power ON the device of a HDMI source and a Display.
Step 7
If the system does not work properly, go to page 1-4, trouble shooting.
Note: It is NOT recommended for customer to use any intermediate cable or
adapter between them. It may deteriorate the signal transmission performance.
Note: Do not use electric screw driver to tighten the screw. Excessive force on
screw may damage the product.
Note: Do not pull the cable with excessive force.
Note: This cable is directional cable. Please be cautious with the direction.
Note: Do not bent the neck (strain relief) of the cable too much.
1-3 Installation

Troubleshooting
The display shows black screen.
Ensure that the HDMI ports are firmly plugged into the HDMI source and
display. Ensure that the TX and RX modules are plugged correctly to the
HDMI source and display respectively, the cable guides which side to insert.
Check if the HDMI source and display are powered on and properly booted.
Reset the system by de-plugging and re-plugging the TX HDMI port or RX
HDMI port.
Re-boot up the system while connecting the optical HDMI cable system.
Check if the cable or its jacket is not physically damaged.
Check if the cable is not bent or kinked.
Screen is distorted or displays noises.
Ensure connections of both plugs while disconnecting and reconnecting the
optical HDMI cables.
Maintenance
No special maintenance is required for the optical HDMI cables. Ensure that
the cables and power modules are stored or used in a benign environment
free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis.
Technical Support and Service
General Inquiries: [email protected]
Tech Support: [email protected]
Visit us at www.opticisusa.com to learn more about Opticis products
1-4 Troubleshooting, Maintenance, Technical Support
Product Specifications
LHM2-Pxxx, HDMI 2.0 Detachable Active Optical Cable
Supports HDMI 2.0 Standards
Extends up to 4K (4096x2160) at 60Hz (RGB & YCbCr : 4:4:4)
Transmits HDMI 2.0 data up to 100m(328feet) over hybrid cable
Offers perfect flexibility during installation by separating HDMI
connector from cable
Cable Options:
-LHM2-PPxx : Plenum Jacket
-LHM2-PLxx: LSZH Jacket
-LHM2-PTxx:TPU Jacket
*Note: “xx” stands for the length of the cable.
Ex: 10m of LHM2-PP LHM2-PP10 (“A0” for 100m)
Operates by external USB power on the display(RX) side
Provides USB power cable on display source(TX) side for
insufficient power supply(optional)
Supports 3D contents transmission
Complies with CEC, EDID and HDCP 2.2
Supports HDR at 10 bit or 12 bit speeds respectively within its
maximum bandwidth, 18Gbps
Tensile load: 500N
Minimum bending radius: 6mm
Outer diameter of cable: 3.4mm (±0.2)
Mechanical specifications of TX and RX module parts
Dimensions: 71.7mm / 24.2mm / 10.1mm (L/W/H)
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: - 30°C to 70°C
Humidity: 5% to 85%
Certifications: CE / FCC
1-5 Product Specifications

Warranty Information
1 (One) Year Warranty
Opticis warrants this optical HDMI extension cable to be free from defects in
workmanship and materials, under normal use and service, for a period of
one (1) year from the date of purchase from Opticis or its authorized resellers.
If a product does not work as warranted during the applicable warranty period,
Opticis shall, at its option and expense, repair the defective product or part,
deliver to customer an equivalent product or part to replace the defective item,
or refund to customer the purchase price paid for the defective product.
All products that are replaced will become the property of Opticis.
Replacement products may be new or reconditioned.
Any replaced or repaired product or part has a ninety (90) days warranty or
the reminder of the initial warranty period, whichever is longer.
Opticis shall not be responsible for any software, firmware, information, or
memory data of customer contained in, stored on, or integrated with any
products returned to Opticis for repair under warranty or not.
Warranty Limitation and Exclusion
Opticis shall have no further obligation under the foregoing limited warranty if
the product has been damaged due to abuse, misuse, neglect, accident,
unusual physical or electrical stress, unauthorized modifications, tampering,
alterations, or service other than by Opticis or its authorized agents, causes
other than from ordinary use or failure to properly use the Product in the
application for which said Product is intended.
Dispose of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate systems)
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
1-6 Warranty Information
© 2021 Opticis Co., Ltd. All Rights Reserved
Revision 1.0 Sep 2021
OPTICIS USA, LLC
Office: 949.701.4742
Email: [email protected]
https://www.opticisusa.com
For order support, please contact us at [email protected]