Opticon 8000 User guide

OPTICON 8000
WIRELESS SETUP
MANUAL
Version # 1

Opticon 8000 Wireless Setup
Version # 1
Hand Held
Confidential Page 2 9/5/2014
Prepared By:
Elliott Data Systems, Inc.
17825 Edison Ave
Chesterfield, MO 63005
[phone]
Fax [phone]
Customer Service Support
1-888-345-8511
[e-mail]
www.elliottdata.com

Opticon 8000 Wireless Setup
Version # 1
Hand Held
Confidential Page 3 9/5/2014
Wireless configuration
1. Select > Start > Settings > Control Panel
2. Select the WLAN icon to configure.
3. Select the “Profile” tab at the top.
Select “Control Panel”.
Double click the
WLAN Manager icon.

Opticon 8000 Wireless Setup
Version # 1
Hand Held
Confidential Page 4 9/5/2014
4. Select the “Scan” button and highlight your desired wireless network
5. Select “Configure”. You can set up encryption if desired.
Select “Profile”
tab

Opticon 8000 Wireless Setup
Version # 1
Hand Held
Confidential Page 5 9/5/2014
6. Select the “List” button and set the “Auto-Profile” for your wireless network.

Opticon 8000 Wireless Setup
Version # 1
Hand Held
Confidential Page 6 9/5/2014
7. Select “Auto Profile” radio button and click “OK” to close.
** Notice the signal strength icon at the bottom task bar **
Note: When wireless configuration is complete back up the hand held
device.
1. Start button, “Settings”, “Control Panel”, “Control Center”, “Backup
& Restore”, “Backup Now”