Opticon PX-36 User manual

PX-36
V-1.0
1
PX-36
2D Data Collector with Bluetooth
The PX-36 is a Data Collector with a 2D barcode scan engine,
Bluetooth communication and time stamp functionality.
V-1.0

PX-36
V-1.0
2
The information in this document is subject to change without notice.
Document History
Model Number: PX-36 Original release date 31-08-2015
Revision: V-1.0 Date 31-08-2015
2015 Copyright Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING
OR USING THE PRODUCT.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to
the device purchased. Do not remove the serial number from your Opticon device. Removing the
serial number voids the warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in
materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at
its option, replace products that are defective in materials or workmanship with proper use during the
warranty period. Opticon is not liable for damages caused by modifications made by a customer. In
such cases, standard repair charges will apply. If a product is returned under warranty and no defect is
found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and
software, even if Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should
you need to transport your data collector or send it for service. Damage caused by improper
packaging during shipment is not covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of
OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002.
TEL [phone]; FAX [phone]
SUPPORT
USA Europe
Phone: [phone]
Email: [e-mail] Email: [e-mail]
Web: www.opticonusa.com Web: www.opticon.com

PX-36
V-1.0
3
Revision History
Product Name : PX-36
Edition Date Page Section Description of Changes
First 2015/08/31 - - Initial release

PX-36
V-1.0
4
Contents
1Abstract ........................................................................................................................6
2Overview ....................................................................................................................... 6
3Basic Specifications .................................................................................................... 7
3.1 Ambient Light Immunity conditions.......................................................................................... 9
4Electrical Specifications ............................................................................................ 10
4.1 Main Battery...........................................................................................................................10
4.2 Battery Operating Time and Charging Time (TBD)...............................................................10
5Mechanical.................................................................................................................. 11
5.1 Dimensions............................................................................................................................11
5.2 Weight....................................................................................................................................11
5.3 Color ......................................................................................................................................11
5.4 Detailed view .........................................................................................................................12
6Interface Specifications............................................................................................. 13
6.1 Bluetooth................................................................................................................................13
6.2 IrDA........................................................................................................................................ 13
6.2.1 Specifications.....................................................................................................................13
6.2.2 Transmission Speed..........................................................................................................13
7Optical Specifications................................................................................................ 13
7.1 Basic Optical Specifications ..................................................................................................13
7.2 Aiming Pattern.......................................................................................................................14
7.3 Imaging Range ......................................................................................................................14
7.4 Barcode reading/decoding specifications..............................................................................15
7.4.1 Conditions..........................................................................................................................15
7.4.2 Bar Code Test Sample ......................................................................................................16
7.4.3 Scan Area and Depth of Field ...........................................................................................17
7.4.4 Printed Contrast Signal (PCS)...........................................................................................18
7.4.5 Minimum Resolution..........................................................................................................18
7.4.6 Max. Width Barcode .......................................................................................................... 18
7.4.7 Pitch, Skew and Tilt...........................................................................................................19
7.4.8 Curvature...........................................................................................................................19
7.4.9 Motion Tolerance............................................................................................................... 20
8Environmental Specifications ................................................................................... 21
8.1 Temperature..........................................................................................................................21
8.2 Humidity.................................................................................................................................21
9.3. Ambient Light Immunity ..............................................................................................................21
8.3 Drop Impact Strength (without packaging)............................................................................22
8.4 Drop Impact Strength (in individual packaging).....................................................................22
8.5 Electrostatic Discharge (ESD) Immunity ...............................................................................22
9Regulatory Compliance ............................................................................................. 23
9.1 LED Safety.............................................................................................................................23

PX-36
V-1.0
5
9.2 Product Safety.......................................................................................................................23
9.3 EMC.......................................................................................................................................23
10 Labeling ...................................................................................................................... 24
10.1 Serial Number label...............................................................................................................24
10.2 FCC Warning Label...............................................................................................................25
10.3 White box label......................................................................................................................25
11 Packaging Specifications .......................................................................................... 26
11.1 Individual Packaging Specification (TBD) .............................................................................26
11.3 Collective Packaging Specification........................................................................................27
12 Safety precautions..................................................................................................... 28
12.1 Shock.....................................................................................................................................28
12.2 Temperature Conditions........................................................................................................28
12.3 Foreign Materials...................................................................................................................28
12.4 Other......................................................................................................................................28
Table of Figures
Figure 1: Ambient Light Immunity............................................................................................................ 9
Figure 2: Mechanical drawing................................................................................................................11
Figure 3: Detailed view.......................................................................................................................... 12
Figure 4: Aiming pattern ........................................................................................................................14
Figure 5: Scan Area and Depth of Field................................................................................................17
Figure 6: Barcode width.........................................................................................................................18
Figure 7: Pitch, Skew and Tilt................................................................................................................19
Figure 8: Curvature................................................................................................................................19
Figure 9: Motion tolerance.....................................................................................................................20
Figure 10: Drop test...............................................................................................................................22
Figure 11: PX-36 product labels............................................................................................................24
Figure 12: Serial number label ..............................................................................................................24
Figure 13: FCC warning label................................................................................................................25
Figure 14: White box label.....................................................................................................................25
Figure 15: Individual packing................................................................................................................. 26
Figure 16: Shipment packing.................................................................................................................27

PX-36
V-1.0
6
1 Abstract
This manual provides specifications for the PX-36 Bluetooth data collector with built-in 2D barcode
scanner.
2 Overview
The PX-36 is a programmable data collector that features a CMOS image sensor, built-in Bluetooth
and IrDA for data communication. The CMOS barcode engine is able to read barcodes in its view,
regardless of their direction even when they are upside down they can be read. This scanner is also
particular well suited to read barcodes from LCD screens. The PX-36 has a single green LED aiming
line towards a target bar code that helps users to find the most optimal scanning position.
Bluetooth is one of the communication options for this device allowing it to wirelessly connect to many
peripherals like printers, smart phones and tablets. The supported profiles are SPP (Serial port
profiles) and HID (keyboard emulation). This means that the scanner can work with many Bluetooth-
enabled host devices, such as PCs, tablet PCs and smart phones.
Infra-red is another communication option of the PX-36. Stored data can be sent out via an IrDA
Ver.1.2-compliant infra-red transceiver. For easy connection to a computer, Opticon sells several
cradles that can be used to receive the infra-red transmission and convert that to a standard RS232 or
USB signal that can be connected to any computer. On top of the communication features that the
cradles can offer, they can also be used to charge the battery inside the data collector.
The PX-36 also has a clock function, allowing it to add a time stamp to scanned barcode data.
Last but not least, the PX-36 is fully programmable allowing users to write a wide range of applications
that allow the PX-36 to exactly according to their wishes.

PX-36
V-1.0
7
3 Basic Specifications
Item Specification Note
Control Section
CPU 32 bit CISC / 96 MHz
FROM (OS only) 512 Kbyte + 32 Kbyte
SRAM (OS only) 96 Kbyte
FROM (storage) 1 Mbyte For applications
SRAM (storage) 1 Mbyte For applications & file
system
Input
Section
Key type 18 keys: trigger, up, down, CLR, BS, shift and 10
numeric keys
Indic
ator
LED 3 colors (red, green and blue)
Buzzer Loudness and tone adjustable
Interface
Bluetooth
Frequency 2402 ~ 2480 MHz
Specification Bluetooth Ver 4 compliant
Communication
distance
10 m Range depends on
environment
Output level Class 2 Max output 4 dBm
Profile SPP / HID
Optical Section
Scan method WVGA (0.36 million-pixel) CMOS area sensor Frame rate: 60 fps
Light source for illumination 2 red LEDs
Light source for aiming 1 green LED
Effective pixels 0.36 million pixels (H: 752 x V: 480)
View angle
Horizontal: about 40.6°
Vertical: about 26.4°
Supported 1D Symbologies
Symbologies
UPC-A, UPC-A Add-on, UPC-E, UPC-E Add-on,
EAN-13, EAN-13 Add-on, EAN-8, EAN-8 Add-on,
JAN-8, JAN-13, Code 39, Tri-Optic, NW-7,
Industrial 2 of 5, Interleaved 2 of 5, S-Code, IATA,
Code 93, Code 128, MSI/Plessey, UK/Plessey,
TELEPEN, Code 11, Matrix 2 of 5, Chinese Post
Matrix 2 of 5, Korean Postal Authority code,
Intelligent Mail Barcode, POSTNET, JPN
The list is constantly
updated with new
symbologies so this
list may not be
complete.
Minimum resolution Code 39 : 0.1 mm PCS 0.9
Curvature R ≥16 mm (10-digit 0.15 mm Codabar)
R ≥20 mm (12-digit UPC)
PCS 0.9
Wide bar code 100 mm wide 0.2 mm resolution Code 39 (DOF 115
mm) is readable:
Motion Tolerance
UPC 100% moving at 2m/sec (DOF 80 mm)
is readable:
Depth of Field
Code 39 Resolution 0.127 60 ~ 95
Resolution 0.254 45 ~ 185
Code 128 Resolution 0.508 50 ~ 250
Resolution 0.20 65 ~ 150
UPC Resolution 0.33 45 ~ 175

PX-36
V-1.0
8
Item Specification Note
GS1/Composite
Symbologies
GS1 DataBar, GS1 DataBar Limited, GS1
DataBar Expanded, Composite GS1 DataBar,
Composite GS1-128, Composite EAN,
Composite UPC
GS1 DataBar: formerly
called “RSS”
Minimum resolution
GS1 DataBar
0.169 mm
Composite Code
0.169 mm
Supported 2D Symbologies
Symbologies
PDF417, MicroPDF417, Codablock F, QR
Code, MicroQR Code, Data Matrix (ECC 0 -
140 / ECC 200), MaxiCode (Modes 2 to 5),
Aztec Code, Aztec Runes, Chinese-sensible
code, PLANET，Netherlands KIX，UK Postal，
Australian Postal
Disable Code 128
when Codablock F is
enabled.
Refer to Chapter 17. for
details
Minimum resolution (mm)
PDF417
0.169 mm
PCS 0.9
QR Code
0.169 mm
DataMatrix
0.212 mm
Depth of field
(mm)
PDF417 Resolution 0.169 55 ~ 105
PCS 0.9
Resolution 0.254 35 ~ 155
QR Code Resolution 0.212 70 ~ 95
Resolution 0.381 35 ~ 165
DataMatrix Resolution 0.254 65 ~ 120
Common
Scan angle
Pitch : ±50°
Skew : ±50°
Tilt : ±180°
Minimum PCS 0.2 or more MRD 12% or more
Power Section
Main battery Lithium-ion 1880 mAh (typ.)
Charge the battery
before initial use
Up-time 20 hours or more
1 scan/10 sec, room
temp, active SPP
connection.
Operating (charging) voltage 6.0V ± 10% Charging with dedicated
cradle.
Current
consumption
Charging Approx 300mA
Environmental Specifications
Temperature Operating 0 ~ 50°C
Storage -20 ~ 60°C
Humidity Operating 20 ~ 85% No condensing
No frost
Storage 20 ~ 85%
Ambient light
immunity Fluorescent 10,000 lx or less UPC, optical axis angle 75°,
distance 90 mm. See figure
1below for details
Sunlight 100,000 lx or less
Drop Drop the scanner 12 times (6 faces x 2) from
the height of 150 cm onto a concrete floor

PX-36
V-1.0
9
Item Specification Note
Regulatory Compliance
LED safety IEC 62471-1:2006 Exempt Group
Peak Wavelength
624 nm
Product safety EN60950-1:2005
IEC60950-1:2006
EMC
EN 55022:2010
EN 301 489-1 V1.9.2
EN 301 489-17 V2.1.1
EN 300 328 V1.8.1
FCC Part 15 Subpart C, Subpart B ClassB
For residential,
commercial and light-
industrial environments
Other Bluetooth logo certification
Immunity
Test
ESD No distruction Air discharge (direct): ±15 kV Conditions:
IEC61000-4-2
compliant
No malfunction Contact discharge (direct / indirect): ±6 kV
Air discharge (direct): ±8 kV
Physical
Features
Dimensions 44 × 25 × 140 (WDH mm)
Weight Approx. 115 g Excluding battery
3.1 Ambient Light Immunity conditions
Ambient Light Immunity is measured using the following conditions:
Figure 1: Ambient Light Immunity
Barcode Label:
Resolution Symbology PCS Size (mm) No. of Digits
0.330 mm (13mil) 12-digit UPC 0.9 31.5 × 25.0 12
Angles : α = 0°, β = +15°, γ = 0°
Curvature : R = ∞
Note: α, β and γ respectively represent pitch, skew and tilt. Please see chapter 7.4 for details on how
these values are defined.

PX-36
V-1.0
10
4 Electrical Specifications
4.1 Main Battery
The main battery is a lithium-ion secondary battery.
Nominal capacity: 1880 mAh
Battery charging time: Approximately 7 hours
Battery type: NP120, without leads
4.2 Battery Operating Time and Charging Time (TBD)
Parameter Specifications Notes
Backup battery 3 mAh manganese dioxide battery
Current consumption 1 mA or less* Standby
100 mA or less* Bluetooth and Backlight on
400 mA or less* When scanning
Usable time 10 hours or more 1 scan/5s
Data hold time 72 hours or more After main battery discharged
*With nominal battery voltage (3.7V)