Optiview EM Series User manual

VR Embedded DVR series: EM, LT and PRO series
jb 08122011
REMOTE CONTROL
The remote control interface is shown as in Figure 2-7.
Button Number
Name
Same Function from the DVR Front Panel
1
Address
Press to input DVR serial number to enable user to
control DVR. DVR Serial number will be the DVR
address.
2
Multiple-window
Multiple window
switch button as in the front
panel labeled as (MULT)
3
0-9 number key
Input password, channel or switch channel. Shift is the
button to switch the input method.
4
Record
Used to control record function
5
Auxiliary key
a. One-window monitor mode, click this button to
display assistant function: PTZ control and image
color.
b. Backspace function: in numeral control or text
control, press it for 1.5 seconds to delete the
previous character before the cursor.
c. In motion detection setup, working with Fn and
direction keys to configure settings.
d. In text mode, click it to switch between numeral,
English character(small/capitalized) and etc.
e. In HDD management interface, you can click it to
switch HDD record information and other
information

VR Embedded DVR series: EM, LT and PRO series
jb 08122011
6
Confirm /menu
Used to confirm operation or go to MENU OSD
7
Cancel
a. Go to previous menu, or cancel current operation
b. At playback screen: click it to restore real-time
monitor mode
8
Direction
a. Activate current control, modify setup, and then
move up and down.
b. Increase or decrease numeral value
c. Function button for PTZ menu such as pan, tilt to
left, right, up and downward.
d. Shift current activated control, and then move left
and right
e. When at playback screen, click these buttons to
control playback bar
9
Forward
Various forward speeds and normal speed playback.
10
Previous
In playback mode, playback the previous video.
11
Backward
In normal playback or pause mode, click this button to
reverse Playback
12
Stop
Stops playback