OptoSupply OS-OC013AIG2 User manual

www.optosupply.hk
Ver.1
1
Product Manual
NAME: 24-Key infrared LED controller
MODEL: OS-OC013AIG2
Summarization
24-key infrared LED RGB controller adopts the advanced micro control unit, it is
used for controlling a variety of lamp whose source of light is LED. For instance,
point source of light, flexible light strip, wall washer lamp, glass curtain wall light and
so on; At the same time, it has many advantages such as convenient
connection ,simplicity to use and others. According to the actual need of customers,
it can carry out jumpy changing, gradual changing and other effects of change. Total
24 modes for your choice.
Technical parameters
●Working temperature: -20-60 ℃
●Voltage supply: DC5V, 12V, 24V <optional> (for orders specify voltage)
●Output: 3 channels
●Connecting mode: common anode or common cathode
●External dimension: L49.5ΧW34.5ΧH22 mm
●Net weight: 50g
●Gross weight: 71g
●Static power consumption: <1 W
●Output current: <2 A (each channel)
●Output power: 5 V: <30W, 12V: <72W, 24V: <144W
Model No. OS-OC013AIG2
REV. 2

www.optosupply.hk
Ver.1
2
External Dimension
Controller Dimension:
Remote control dimension:
Model No. OS-OC013AIG2
REV. 2

www.optosupply.hk
Ver.1
3
Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short
circuit can’t occur between connecting wire before you turn on the power;
2. Standard color changes as follows:
Brightness +( 16 in all ) Brightness -
--
-
( 16 in all ) Off On
Static red Static green Static blue Static white
Static orange Static pea green Static dark blue 7 color jumpy change
Static dark yellow Static cyan Static brown All fade out & fade in
Static yellow Static light blue Static pink 7 color fade change
Static straw yellow Static sky blue Static purple 3 base color jumpy
Direction:
①
When switching to dynamic modes the button of “Brightness +”/ “Brightness -” means
the speed of light change is up/ down, there are 100 step in all.
②
The FADE and SMOOTH all have two modes, which are “3 base colors jumpy/7
colors jumpy” and “3 base colors fade/7 colors fade”, you can press one more time to
change it.
③
when press FADE and SMOOTH, the “FLASH” and “STROBE” key are invalid.
④When in the static modes, press the “FLASH” /“STROBE” key, the mode
will change to be “ the single color Stroboflash/ Gradual changing”.
Key instruction:
Model No. OS-OC013AIG2
REV. 2

www.optosupply.hk
Ver.1
4
Connecting drawing:
Model No. OS-OC013AIG2
REV. 2