Orava HR-108 User manual

Automatic toaster
HR-108
Instruction manual
Before using the device, read this manual carefully and
store it for future reference.
EN

2EN
The intended use of the device
The device is intended exclusively for toasting or heating the bread, to the
extent that it is determined by the technical and operating parameters and
functions, the safety and user instructions and the external influences of the
operating environment.
ORAVA electrical appliances are manufactured according to the state of the art
and recognized safety-technical rules. Nevertheless, the use or use contrary
to designation may result in the risk of injury or endanger the life of the user or
third person, damage to the device and other material values.
1. GENERAL SAFETY INSTRUCTIONS AND
WARNINGS
• This document contains important safety instructions and
warnings for safe, correct and economical operation of the
electrical equipment. Its compliance helps the user avoid risks,
increase reliability and product life.
• In this document, the generic term product is used in text parts
such as:
electrical equipment - any device used for the production,
conversion, transmission, distribution or use of electricity.
• From the point of view of the purpose of using electricity, the
concept of electrical equipment in the strict sense of the word will
include the following categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational
1.1 General safety instructions
• Before commissioning the unit, we recommend that you carefully
read
the operating instructions and operate the equipment in
accordance with the instructions!
• The safety instructions and warnings in this manual do not cover
all the possible conditions and situations that may arise when
using the device. The user must understand that a factor that can
not be incorporated into any of the products is responsibility and
caution. These factors must therefore be ensured by users / users
who use and operate this device.

3EN
• Failure to follow the safety instructions and warnings is forbidden
by the manufacturer for any damage to health or property!
• Make sure that the appliance is complete and shows no signs of
damage before using the appliance for the first time. If the product
is defective or if it has any visible damage, do not use the product.
• Keep the operating instructions as close to the device as possible
throughout its service life. Always keep the operating instructions
together with the appliance for future use and use by new users.
• Use the appliance only for the purpose for which it is intended
and in the manner specified by the manufacturer.
• The appliance is intended for home and similar indoor use, with
no special focus.
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the
device by unauthorized modification or modification of any part of
the device.
• The manufacturer is not responsible for damages caused during
transportation, misuse, damage or destruction of the equipment
due to adverse weather conditions.
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside
environment.
• Always keep the operating environment clean and well lit.
• Do not place the device on an unstable surface. Overriding or
dropping the device may result in personal injury or damage to
the device.
• Do not expose the unit to direct sunlight or excessive heat
sources.
• Do not use an electric appliance in areas with flammable liquids,
gases or dust. The appliance may be the source of scaling, which
can result in the ignition of dust or vapors.
Features of the operating environment
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or
occurrence of water vapor
5. Occurrence of foreign bodies: amount and type of dust are not
significant
Protection class: IP20

4EN
• Other characteristics of the operating environment (mechanical
stress
- shocks and vibrations, occurrence of plant, animals, weather
effects) are negligible in terms of effect on the correct and safe
use of electrical equipment.
1.3 Electrical safety
• Before connecting the appliance to the power supply for the
first time, make sure that the voltage on the appliance label
corresponds to that of the household electrical outlet.
• The electrical appliance is designed for mains supply 230 V ~.
The electrical safety of the appliance is guaranteed only if it is
properly connected to the electricity grid.
• Only use a power cord with a plug (mains lead) that came with
the device and compatible with a wall outlet. Using another cable
may result in fire or electric shock.
• Always connect an electrical appliance to an easily accessible
power outlet. In the event of an operating fault, the appliance
must be switched off as soon as possible and disconnected from
mains supply.
• Do not pull the power cord / power cord by pulling on the cord /
cord. Disconnect the power cord by pulling the plug behind the
power cord / power cord plug.
• If you use an extension cord, check that the total rated (ampere)
power of all devices connected to the extension cord does not
exceed the maximum current rating of the extension cable.
• If you need to use an extension cord or power supply block, make
sure that the extension cord or power pack is plugged into a
power outlet, and not to another extension cord or power supply.
Extension power cord or power supply block must be designed for
grounded plugs and plugged into a grounded outlet.
• The power plug of the appliance must be compatible with the
mains socket. Never use any adapters or modify the socket in any
other way. Do not use inappropriate or damaged soclets.
• To avoid electrical shock, plug the power cables into properly
grounded electrical outlets. If the device is equipped with a
3-pin power supply cord, do not use adapters that do not have
a grounding element or remove the grounding element from the
plug or adapter.
• Do not bend, crush or otherwise expose the power cord / power
cord of the appliance to mechanical stress or external heat
sources. Damage to the power cord may result in electric shock.

5EN
• If the power cord is damaged, disconnect the appliance from the
mains and do not use it again. If the power cord / power cord is
damaged, it must be replaced by the manufacturer, its service
department, or a qualified person to avoid the risk of electric
shock.
• Regularly check and maintain the electrical appliance as well as
the power cable. Disconnect the power plug regularly and clean
it if necessary. Pollution by dust or other substances may cause
disruption of the insulating state and consequently fire.
• Do not expose the appliance to water or moisture. The ingress
of water into the appliance increases the risk of electric shock.
If the power cord is wet or the appliance gets water, disconnect
it immediately from the mains. If the appliance is plugged into a
mains socket and if possible, turn off the power supply before
attempting to disconnect the power supply. If you are pulling wet
wires from a live power source, be very careful.
• If the electrical equipment is installed (connecting) the protective
covers are dismantled, the electrical parts must not be accessible
to the user when the installation is finished.
1.4 Safety of persons
• This appliance is intended for use by persons without an
electrotechnical qualification (layperson) according to the
instructions specified by the manufacturer.
• Device operation includes activities such as switching on and off,
user manipulation and setting of operating parameters, visual
or auditory inspection of the equipment, and user cleaning and
maintenance.
• This appliance can be used by children 8 years of age and older
and persons with reduced physical, sensory or mental abilities
or lack of experience and knowledge only when under the
supervision or guidance of the responsible person have been
instructed to use the appliance in a safe way and understand the
potential hazards .
• Cleaning and user maintenance can be carried out by children
8 years of age and older only under the supervision of the
responsible person.
• Children may not play with the appliance.
• Always keep the appliance out of reach of children during use
and operation. Be sure to download the appliance even for a
freely accessible power cord.

6EN
• Always be careful when operating the electric appliance. Do
not use an electric appliance if you are overly tired, under the
influence of medication or narcotic drugs that reduce attention
and focus. Inattention during operation may result in serious
injury.
1.5 Cleaning, maintenance and repairs
• Observe the normal user cleaning and maintenance of the
appliance in the recommended way. Do not use solvents or harsh
cleaners for cleaning. Pollution and visible stains from finger
contact, respectively. The hands can be cleaned using detergent
detergents specially designed to clean household appliances.
• If you do not use the appliance, clean it or disconnect the
appliance from the power supply when the appliance is faulty.
• Do not disassemble the appliance. The appliance works with
a dangerous voltage. For this reason, always switch off the
appliance and disconnect it from the power supply. In the event of
a fault, please have the repair serviced by an authorized service
center.
• Only guarantee qualified and qualified personnel to repair and
repair the electrical appliance.
(*) Appropriate qualified professional: the sales department of the manufacturer or
importer or the person qualified and authorized to carry out this type of activity
with the ability to avoid all risks.

7EN
2.Special Safety Instructions.
Read carefully!
Electrical equipment is designed and manufactured in such a way as to allow
for safe operation and use by persons without a professional qualification.
Despite all the measures taken by the manufacturer to ensure safe use,
handling and use, it carries with it some residual risks and associated potential
hazards.
To warn of possible hazards, the following symbols and their meanings were
used on the device and in the accompanying documentation:
This symbol alerts users that the device is operating a dangerous
electrical voltage. Do not remove protective covers on the device.
Failure to observe the safety instructions during use and operation of
the device may result in:
Danger of electric shock! Danger of serious injury or life threatening!
This symbol alerts users to the following: • Risk of serious injury or
life threatening when not following the safety instructions when using
and operating the unit!
Danger of damage to equipment or other damage to property!
This symbol warns users that if the safety instructions for use and
operation of the appliance are not followed, there is a risk of: Burns
from hot surfaces!
This symbol alerts users to the following: Failure to comply with the
safety instructions for use and operation of the equipment may result
in: Fire hazard!
This symbol used on the product replaces the sentence: Do not
immerse in water or other liquids!
Transportation/Transfer
• When transporting , be careful when moving to avoid overturning the device.
• Transport / carry the equipment only after thorough inspection of the space
and the routes, which must be unobstructed.
• Never carry the machine while it is in operation. Do not carry the device while it
is plugged into a wall outlet.
Warning!
• Some surfaces may be hot during operation.
• Never transfer the appliance until it has cooled down to ambient temperature.
• Transfer the device firmly by gripping the handles or the lower edge of the base
or fixed parts of the body.
• Make sure that your hands and equipment are not damp or slippery when
carrying. There is a risk of serious injury or life threatening!
There is a risk of damage to the device!

8EN
Unpacking/Packaging
• Unpack and remove all parts and accessories of packaging materials, labels,
and labels before putting the device into operation. Keep all packaging
materials in a safe place or keep them out of the reach of children and
inappropriate persons.
There is a risk of serious injury!
There is a risk of choking!
Check / Startup
• We recommend performing both initial and subsequent regular machine
inspections. Do not attempt to interfere with the construction or adjustment of
the component parts in any way.
• Never use the appliance if it is incomplete, damaged, or damaged during use
(eg due to fall). In case of damage, have the appliance repaired by a specialist
workshop.
• Clean the machine before commissioning as described in the „Startup“ section.
„Cleaning“.
• Never clean the device (body with electrical parts) and the power cord with the
plug in a way that could cause the liquid to flow into the device.
• Clean these parts with a slightly moistened cloth and wipe dry or let it dry.
Location/Installation
Warning!
• The appliance is not intended for use in recreational and motor homes and
boats.
• Only place the appliance on straight, strong and stable pads - kitchen work
desks and furniture parts, suitable for the location of kitchen utensils.
• It is recommended to use a heat-resistant insulation pad underneath the
device to provide effective protection against excessive heat flowing from the
device.
• The insulating washer must be made of the reaction-to-fire class A1 (non-
combustible) or A2 (non-flammable) with a thickness of at least 1 mm. The size
of such a pad should exceed the ground plan of the device by 150 mm on each
side.
• Always make sure that the place you want to place the device has sufficient
space, stability, mechanical strength and appropriate lighting.
• Do not place objects or containers of liquids on the heated plates unless you
use them.
• Do not place the appliance:
- unstable tables or inappropriate parts of furniture,
- on an uneven and dirty surface,
- on the sealing edge of tables or parts of furniture,
- in the vicinity of containers with water or other liquids.
Warning!
• It is forbidden to install and use the device in an environment where there is a
risk of fire or explosion of flammable gases and vapors, and a fire of flammable
liquids.
Warning!
• Place the device in a place where children can not reach freely. Work desks
and furniture for placing should not be less than 85 cm.

9EN
• Prevent children from handling the device. The device may overwrite and
cause serious injury. Mechanical damage (breakage or breakage of parts and
covers) of the device can cause serious injury.
• Do not place the appliance and do not use in the proximity of containers
containing water. If the appliance falls into the water, do not remove it. First,
pull the power cord plug out of the mains socket and then select the appliance
from the water. In such cases, take the device for inspection to a specialist
service to check that it is safe and working properly.
There is a risk of electric shock!
There is a risk of electrical short circuit!
• Do not cover the device in any way. Do not insert or allow the foreign bodies
to enter the holes of the device covers. Do not cover the cover openings for air
flow. Air ventilation ensures reliable and safe operation of the device.
• From a fire protection and safety point of view, the device can also be placed
on a work table or similar surface if a safe distance from the flammable
surfaces is maintained. materials:
- at least 500 mm in the direction of the main heat sink, and
- at least 200 mm in other directions.
There is a risk of electric shock!
There is a danger of fire!
Operation/Supervision
Danger!
• Do not reach the work area with your fingers (especially at
the operating time of the appliance and when the heaters
are hot or warm) or any tools, utensils.
• You can only reach the machine‘s work area if it is switched
off completely and disconnected from the power supply.
When handling, be very careful.
• Do not switch on the appliance until the appropriate cooking
area has been placed in the work area.
There is a risk of serious injury or life threatening!
There is a risk of serious burns!
Warning!
• There is a high degree of food warming and hot air when
cooking food. Be very careful at the time of operation.
• Do not place the face or other body parts in the immediate
vicinity of the work area of the device and under the
influence of radiant heat.
There is a risk of very serious injury!
There is a risk of burning from the radiant hot air!
• Use only the clean and appropriate type and size of pastry
for preparing toasts. An inappropriate type and size of
pastry may cause the device to malfunction (for example, an
over-sized piece of bread may block the automatic cut-off
mechanism).

10EN
• Do not put pastry in the machine with grease or other
ingredients. A high degree of heating will result in the
spreading of these foods, subsequent contamination and
possible damage to the appliance.
• Always keep your device under control during use and
operation!
• This device is not intended to be operated via a programmer,
external time switch or remote control because there is a
risk of fire if the device is covered or incorrectly positioned.
• Do not leave the appliance unattended during use and
during operation, especially when there are children,
inappropriate persons or animals nearby.
• Do not use the appliance near easily flammable materials
and objects, curtains, curtains, decorative fabrics,
There is a danger of fire!
There is a risk of damage to equipment or other property
damage!
Warning!
• The temperature of the accessible surfaces may increase
during operation.
• Do not touch hot surfaces, especially when operating and
immediately after use.
• Be very careful when preparing meals. Heat-treated dishes
are also very hot. When handling equipment and food use
kitchen gloves and appropriate tools.
Warning!
• After turning off the machine, the surfaces remain warm for
a certain amount of time. Before any further handling of the
device - storage , always wait for the device to cool down
completely.
There is a risk of burning from the hot surface!
There is a risk of burning from a hot food!
• Do not use the appliance for space heating, drying textiles,
clothing, footwear or any other items! Do not place any
objects on the device covers.
There is a danger of fire!
There is a risk of damage to equipment or other property
damage!
• The unsupervised cooking of food can be dangerous and
may result in fire - bread can burn.

11EN
• If there is a fire, do not attempt to extinguish with fire. Always
turn off the device first
(disconnect from the electrical outlet) and cover the flame on
the device, for example, fireproof blanket.
There is a risk of damage to the device or other damage to
property.
There is a danger of fire!
• The electrical socket and power cord must remain easily
accessible for safe disconnection of the device from the
power supply.
• Protect the power cord from touching the hot parts of the
device and sharp edges.
• Always unplug the power cord from the wall outlet when
leaving the device unattended.
• Never leave the appliance unattended and freely accessible
with a free-hanging power cord. Children,
unqualified persons or animals could download the device
for the power cord.
• Always switch off and unplug the appliance before removing
the accessories, before installing and dismantling, before
cleaning or servicing, or after use, by unplugging the power
supply from the electrical outlet.
There is a risk of serious injury!
There is a risk of electric shock! There is a risk of damage to
equipment or other property damage!
• Do not store the appliance with a wrapped cord around your
body. Unfold the network cord „in the way it was put in the
original packaging by the manufacturer.
There is a risk of damage to the device or other damage to
property.
• Never overload the equipment beyond the limits specified by
the technical specifications!
• Observe the operating mode of the device (normal operating
time and rest time) according to the operating and operating
instructions.
• If you notice any unusual occurrences (sounds, odors,
smoke, etc.) while using the device, switch off the device
immediately and disconnect it from the power supply. Have
the appliance checked by a specialist workshop.

12EN
• Carefully clean the appliance after all use of all residues of
processed food. Incorrect cleaning or neglect of cleaning
results in reduced equipment safety and service life.
• Before cleaning, disconnect the appliance from the power
supply and allow it to cool down sufficiently.
Warning!
• Do not immerse the appliance (even in part) in water or
other liquid.
There is a risk of electric shock! There is a risk of damage to
equipment or other property damage!
• If any safety component (mechanical, electrical) is part of
the device, never disable this part/component! If the safety
component/part is damaged or not working, do not use the
appliance!
• Carefully clean the appliance after all use of all residues of
processed food. Incorrect cleaning or neglect of cleaning
results in reduced equipment safety and service life.
• Before cleaning, disconnect the appliance from the power
supply and allow it to cool down sufficiently.
Warning!
• Do not immerse the appliance (even in part) in water or
other liquid.
There is a risk of electric shock! There is a risk of damage to
equipment or other property damage!
• If any safety component (mechanical, electrical) is part of
the device, never disable this part/component! If the safety
component/part is damaged or not working, do not use the
appliance!
• Never underestimate the potential hazards and take extreme
caution !!!

13EN
Instructions for cleaning the surfaces of parts and components of food
contact devices
• The appliance must not adversely affect the quality and properties of the food
while using it; therefore, it is necessary to regularly and thoroughly clean all
surfaces that come in contact with the processed food.
• Once the appliance has been used, it is always necessary to clean all parts of
it from the food residue. It is important to thoroughly clean the surfaces from
the residues of burners and possible greasy deposits.
Follow these steps:
• Disassemble (depending on the type of appliance and the manufacturer‘s
instructions) parts and components that are individually washable either
directly under running hot water or can be immersed in warm water where
appropriate detergent is added.
Otherwise, clean the unit in assembled condition.
• Carefully remove any visible parts of the food from all parts of the appliance
(parts of the food processor).
• It is a good way to use all areas with a dry paper towel. Do not use abrasive
cleaners and metal utensils for cleaning.
• Areas designed to prepare food and contaminated surfaces with adequate
pressure, but thoroughly use a cleaning sponge soaked in warm water and,
if necessary, a small amount of detergent, and remove all food and grease
residues.
• Apply the cleaned area of parts and parts of the appliance using a soft sponge
or cloth soaked in clean, warm water. Be careful not to get water into the
electrical parts of the appliance.
• Repeat this procedure as necessary to remove any detergent residue.
• Always dry thoroughly with a soft cloth or paper towel, or allow it to dry.
• It is important to clean the device (parts and components intended for contact
with food) because food residues tend to be subject to a rotting process and
thus contaminate unsafe foods when they are processed.

14EN
Parts description
1 Interior Slipper Control – switching on the toasting
2 Inner baking area up to 4 pieces of toast
3 Crate tray
4 STOP button
5 Heat intensity regulator (browning) - 6 degrees
6 Power cord

15EN
Operations
1. Connect the appliance only to a 230V ~ 50Hz electrical outlet
with a protective pin installed in accordance with the applicable
regulations.
2. Using the controller (5), you can select the baking degree from
1 to 6. We recommend that you set a lower grade to maximize
baking and bake repeatedly. The team gets the desired shade.
3. Push 1 bread pan into each baking bore and pull the blade down
with the handle (1) down until it locks into place.
4. The appliance starts to operate and turns off automatically when
the cooking is completed according to the set stage.
5. The baking process can be interrupted at any time by pressing
the STOP button (4).
6. Allow the device to cool before storing.
Advice
• Thin and dry baking slices are cooked faster than damp and
coarse lace.
• If you feel a burn when you are baking, stop cooking.
• Do not dangle a lace that is coated with butter or other spreads.
Warning
Do not put the wrapped bread in the toaster. Remove the wrapped
wrapping material before baking.

16EN
Cleaning the decanter tray
When using the machine, periodically clean the grease trays (3).
The tray is located at the rear bottom of the toaster. Grasp the tray
and pull it out. After cleaning, slide the tray back.
Cleaning
• Before each cleaning, disconnect the appliance from the mains
and allow it to cool down.
• Do not attempt to remove the loop of bread from the machine
without disconnecting the appliance from the mains.
• Use only a slightly moistened cloth to clean the appliance.
• Do not use any solvents or abrasive cleaners.
• Unscrew the screw at the bottom of the toaster, open the cover
and empty the remaining bread.

17EN
Technical specifications
Power supply: 230 V~ 50 Hz
Power consumption: 1 200 W
Dimensions (WxHxD): 37 x 16,8 x 14,7 cm
Weight: 1,1 kg
The right to change is reserved!

18EN
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
Dispose of used packaging material at a municipal waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on the products or in the accompanying documents means that used electrical
and electronic products should not be mixed with general household waste. For proper
disposal, recovery and recycling, please return these products to designated collection
points. Alternatively, in some countries of the European Union or other European countries,
you may return your products to your local retailer when purchasing an equivalent new
product. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment natural resources and help prevent potential
negative effects on environment and human health, which could be the consequences
of improper disposal waste. Contact your local authority or nearest office for more
details collection point. Improper disposal of this type of waste may result in penalties in
accordance with national regulations.
For business entities in the countries of the European Union
If you wish to discard electrical and electronic equipment, please request the necessary information from
your seller or supplier.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to discard this product, please request
obtain the necessary information on the correct method of disposal from the local authorities or from the
your supplier.
This product complies with all the essential requirements of the EU directives that apply to it.
Producer:
Importer:
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
ORAVA distribution CZ, s.r.o.
Ostravská 494
739 25 Sviadnov
Česká republika
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika