
Clothes Dryer
: CD-S1232
: 220-240V~, 50/60Hz
: 1000W
Model
Voltage
Power
Maintance and Care
1) Unplug the power cord before cleaning.
2) Do not immerse the main body of Dryer in water, it may cause
electric shocks.
3) Clean the main body of Dryer with a soft cloth. To remove
presistent dirt, wipe down with a cloth that has been dampened
with warm soapy water.
Warranty
This product is guaranteed for 1 year (commercial use for 3
months)from the date of receipt against manufacturing defect.
The warranty does not cover the aluminum stand, clothes cover
and other accessories, damage or defect caused by negligence or
use not according to this instruction manual.
Paper weight: 120 gram or above
Printing Color: Black
1) Plug the power cord into a 220-240V~ electrical outlet.
2. Turn the control knob clockwise, the Dryer switch on and the
power indicator light will be on.
3. Turn the control knob to set desired auto power off time. The
range of the timer is from 0 to 180 minutes.
4) To turn the Dryer off, rotate the control knob to "OFF" position.
5) Turn the control knob anti-clockwise to "ON" position for drying
without time limit.
Remark: For repair service, please contact and bring alone the
invoice or receipt to the Service Centre.
***Extra 3 months warranty: just complete Online Warranty
Registration within 10 days from the date of receipt, free
warranty will be extended to 15 months (not applicable to
commercial use). Please enter our website: www.origo.hk
Caution
1) Read all instructions carefully before using the Clothes Dryer.
Appropriately keep it for furture reference when necessary.
2) Before using the Dryer, check if the volatage marked on
the rating label corresponds to the mains in your home.
3) This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
4) Only the provided power cord can be used.
5) Remove all the package before using the Dryer.
6) The Dryer is not intended for use in wet or damp locations.
7) Place the Dryer on a stable surface and keep away from heat
source.
8) Do not use the Dryer in outdoor location.
9) The Dryer is designed for domestic use only.
10) Ensure spin-drying completely before using the Dryer.
11) To avoid being scalded, never touch the metal parts on the
wind outlet during drying process.
12) This Dryer is intended only for drying textiles washed in
water.
13) Check the clothing care label before drying, Make sure they
can be dried using the drying machine, pay special attention
to its temperature limits.
14) Keep a distance of at least 150mm between Dryer and the
wall.
15) Clothes to be dried should be able to endure 75 degree
above, and maximum weight is 15 kgs.
16) Always check the Dryer, if the power cord is damaged, it must
be replaced and repaired by authorized service agent.
Operation
Main Parts
STORAGE: Store the Clothes Dryer with these instructions in the
original box in a cool and dry place.
Installation
1) Insert the round tube with
connector into correspond
holes at the flat tube, then
fix it with screw.
2) Up insert the casters into flat
tube and put the main body
support rack onto the two
round tube.
3) Insert the round tubes with
the connector nuts into the
plastic holes of the flat tube,
then screw the connector nuts
tightly.
4) Put the clothes cover through
the lower round tube. Connect
the lower round tubes and
upper round tubes by the
connectors and connector nuts.
5) Repeat step (1) and fix it onto
the upper round tubes with
the connector nuts. Let the
clothes cover up to cover the
whole aluminum stand.
Flat Tube Main Body Support Rack Caster
Round Tube
Connector/Connector Nut
Round Tube with Connector
Connector
Clothes Cover Water Proof Cover Main Body
Screw Flat Tube
Round Tube
with Connector
Up insert
Caster
Flat Tube
Down
insert
Screw
tightly
Screw
tightly
Screw
tightly
Screw
tightly
6) Screw and fix the water proof
cover on the wind outlet of
the main body, then insert the
air outlet of the main body
into the clothes cover from the
round hole at the bottom of
the clothes cover.
Screw
tightly
Screw
tightly
Service Centre
ORIGIN MARKRTING LIMITED
Unit H,21/F, Reason Group Tower
(nearby 12 Wah Sing Street), 403 Castle Peak Road,
Kwai Chung, N.T., Hong Kong.
Tel: 2156 8238
Office Hours
10:30am - 12:30pm (Mon ~ Fri)
02:30pm - 05:30pm (Mon ~ Fri)
10:30am - 12:30pm (Sat)
(Closed on Sunday and Holiday
Origin Map