Orisec IR-100 User manual
12 15m0 2 4 6 8 10
1.8m
12 15m0 2 4 6 8 10
2.0m
www.orisec.co.uk
Min - 10mm
Optional
Ceiling Bracket
Tamper Resistor
For EOL Wiring
LED
On
Rem\Off
LED = NC/
12V
LED = 0V
Pulse Count
Alarm Resistor
Optional
Wall Bracket
Wall
Ceiling
Seal all holes
Mounting
Orisec IR-100
Instruction Manual
without bracket with bracket
2or Mounting
O/C
1K0
2K2
4K7
5K6
1
2
LED
Pulse
LED
Pulse
12V
EOL Zone
0V
Do Not
Touch
LED
•ALARM TAMPER•
O/C
1K0
2K2
4K7
5K6
6K8
Key Features
Location
Min
Max
3.1m
2.0m
1.8m
Location
Warning
0
2
4
6
8
10
2
4
6
8
10
12
15m
15m
0 2 4 6 8 10 12
12 14 16
0 2 4 6 8 10 12 14 16
Coverage Pattern (m)
Mounting
Height
1
12 15m0 2 4 6 8 10
3.1m
• 15 Metre Range
• Grade 2
• Multi Height Optics
• 1.8m - 3.1m Mounting Height
• Selectable EOL Resistors
• Slide to Fit Front Cover
• Remote LED Control
• Sealed Optics
• True Creep Zones
• Digital Pulse Count
• Temperature Compensation
• Advanced Signal Processing
• RFI Immunity up to 2.7GHz
• Optional Tamper Proof Bracket
Patent Pending
For Double Pole Wiring
A-Zone T-Zone
Detector Setup
3
12V 0V LED
•ALARM TAMPER•
PIR Detector
†
†
†
†
12 15m0 2 4 6 8 10
1.8m
12 15m0 2 4 6 8 10
2.0m
www.orisec.co.uk
Min - 10mm
Optional
Ceiling Bracket
Tamper Resistor
For EOL Wiring
LED
On
Rem\Off
LED = NC/
12V
LED = 0V
Pulse Count
Alarm Resistor
Optional
Wall Bracket
Wall
Ceiling
Seal all holes
Mounting
Orisec IR-100
Instruction Manual
without bracket with bracket
2or Mounting
O/C
1K0
2K2
4K7
5K6
1
2
LED
Pulse
LED
Pulse
12V
EOL Zone
0V
Do Not
Touch
LED
•ALARM TAMPER•
O/C
1K0
2K2
4K7
5K6
6K8
Key Features
Location
Min
Max
3.1m
2.0m
1.8m
Location
Warning
0
2
4
6
8
10
2
4
6
8
10
12
15m
15m
0 2 4 6 8 10 12
12 14 16
0 2 4 6 8 10 12 14 16
Coverage Pattern (m)
Mounting
Height
1
12 15m0 2 4 6 8 10
3.1m
• 15 Metre Range
• Grade 2
• Multi Height Optics
• 1.8m - 3.1m Mounting Height
• Selectable EOL Resistors
• Slide to Fit Front Cover
• Remote LED Control
• Sealed Optics
• True Creep Zones
• Digital Pulse Count
• Temperature Compensation
• Advanced Signal Processing
• RFI Immunity up to 2.7GHz
• Optional Tamper Proof Bracket
Patent Pending
For Double Pole Wiring
A-Zone T-Zone
Detector Setup
3
12V 0V LED
•ALARM TAMPER•
PIR Detector
†
†
†
†
12 15m0 2 4 6 8 10
1.8m
12 15m0 2 4 6 8 10
2.0m
www.orisec.co.uk
Min - 10mm
Optional
Ceiling Bracket
Tamper Resistor
For EOL Wiring
LED
On
Rem\Off
LED = NC/
12V
LED = 0V
Pulse Count
Alarm Resistor
Optional
Wall Bracket
Wall
Ceiling
Seal all holes
Mounting
Orisec IR-100
Instruction Manual
without bracket with bracket
2or Mounting
O/C
1K0
2K2
4K7
5K6
1
2
LED
Pulse
LED
Pulse
12V
EOL Zone
0V
Do Not
Touch
LED
•ALARM TAMPER•
O/C
1K0
2K2
4K7
5K6
6K8
Key Features
Location
Min
Max
3.1m
2.0m
1.8m
Location
Warning
0
2
4
6
8
10
2
4
6
8
10
12
15m
15m
0 2 4 6 8 10 12
12 14 16
0 2 4 6 8 10 12 14 16
Coverage Pattern (m)
Mounting
Height
1
12 15m0 2 4 6 8 10
3.1m
• 15 Metre Range
• Grade 2
• Multi Height Optics
• 1.8m - 3.1m Mounting Height
• Selectable EOL Resistors
• Slide to Fit Front Cover
• Remote LED Control
• Sealed Optics
• True Creep Zones
• Digital Pulse Count
• Temperature Compensation
• Advanced Signal Processing
• RFI Immunity up to 2.7GHz
• Optional Tamper Proof Bracket
Patent Pending
For Double Pole Wiring
A-Zone T-Zone
Detector Setup
3
12V 0V LED
•ALARM TAMPER•
PIR Detector
†
†
†
†
12 15m0 2 4 6 8 10
1.8m
12 15m0 2 4 6 8 10
2.0m
www.orisec.co.uk
Min - 10mm
Optional
Ceiling Bracket
Tamper Resistor
For EOL Wiring
LED
On
Rem\Off
LED = NC/
12V
LED = 0V
Pulse Count
Alarm Resistor
Optional
Wall Bracket
Wall
Ceiling
Seal all holes
Mounting
Orisec IR-100
Instruction Manual
without bracket with bracket
2or Mounting
O/C
1K0
2K2
4K7
5K6
1
2
LED
Pulse
LED
Pulse
12V
EOL Zone
0V
Do Not
Touch
LED
•ALARM TAMPER•
O/C
1K0
2K2
4K7
5K6
6K8
Key Features
Location
Min
Max
3.1m
2.0m
1.8m
Location
Warning
0
2
4
6
8
10
2
4
6
8
10
12
15m
15m
0 2 4 6 8 10 12
12 14 16
0 2 4 6 8 10 12 14 16
Coverage Pattern (m)
Mounting
Height
1
12 15m0 2 4 6 8 10
3.1m
• 15 Metre Range
• Grade 2
• Multi Height Optics
• 1.8m - 3.1m Mounting Height
• Selectable EOL Resistors
• Slide to Fit Front Cover
• Remote LED Control
• Sealed Optics
• True Creep Zones
• Digital Pulse Count
• Temperature Compensation
• Advanced Signal Processing
• RFI Immunity up to 2.7GHz
• Optional Tamper Proof Bracket
Patent Pending
For Double Pole Wiring
A-Zone T-Zone
Detector Setup
3
12V 0V LED
•ALARM TAMPER•
PIR Detector
†
†
†
†
12 15m0 2 4 6 8 10
1.8m
12 15m0 2 4 6 8 10
2.0m
www.orisec.co.uk
Min - 10mm
Optional
Ceiling Bracket
Tamper Resistor
For EOL Wiring
LED
On
Rem\Off
LED = NC/
12V
LED = 0V
Pulse Count
Alarm Resistor
Optional
Wall Bracket
Wall
Ceiling
Seal all holes
Mounting
Orisec IR-100
Instruction Manual
without bracket with bracket
2or Mounting
O/C
1K0
2K2
4K7
5K6
1
2
LED
Pulse
LED
Pulse
12V
EOL Zone
0V
Do Not
Touch
LED
•ALARM TAMPER•
O/C
1K0
2K2
4K7
5K6
6K8
Key Features
Location
Min
Max
3.1m
2.0m
1.8m
Location
Warning
0
2
4
6
8
10
2
4
6
8
10
12
15m
15m
0 2 4 6 8 10 12
12 14 16
0 2 4 6 8 10 12 14 16
Coverage Pattern (m)
Mounting
Height
1
12 15m0 2 4 6 8 10
3.1m
• 15 Metre Range
• Grade 2
• Multi Height Optics
• 1.8m - 3.1m Mounting Height
• Selectable EOL Resistors
• Slide to Fit Front Cover
• Remote LED Control
• Sealed Optics
• True Creep Zones
• Digital Pulse Count
• Temperature Compensation
• Advanced Signal Processing
• RFI Immunity up to 2.7GHz
• Optional Tamper Proof Bracket
Patent Pending
For Double Pole Wiring
A-Zone T-Zone
Detector Setup
3
12V 0V LED
•ALARM TAMPER•
PIR Detector
†
†
†
†
12 15m0 2 4 6 8 10
1.8m
12 15m0 2 4 6 8 10
2.0m
www.orisec.co.uk
Min - 10mm
Optional
Ceiling Bracket
Tamper Resistor
For EOL Wiring
LED
On
Rem\Off
LED = NC/
12V
LED = 0V
Pulse Count
Alarm Resistor
Optional
Wall Bracket
Wall
Ceiling
Seal all holes
Mounting
Orisec IR-100
Instruction Manual
without bracket with bracket
2or Mounting
O/C
1K0
2K2
4K7
5K6
1
2
LED
Pulse
LED
Pulse
12V
EOL Zone
0V
Do Not
Touch
LED
•ALARM TAMPER•
O/C
1K0
2K2
4K7
5K6
6K8
Key Features
Location
Min
Max
3.1m
2.0m
1.8m
Location
Warning
0
2
4
6
8
10
2
4
6
8
10
12
15m
15m
0 2 4 6 8 10 12
12 14 16
0 2 4 6 8 10 12 14 16
Coverage Pattern (m)
Mounting
Height
1
12 15m0 2 4 6 8 10
3.1m
• 15 Metre Range
• Grade 2
• Multi Height Optics
• 1.8m - 3.1m Mounting Height
• Selectable EOL Resistors
• Slide to Fit Front Cover
• Remote LED Control
• Sealed Optics
• True Creep Zones
• Digital Pulse Count
• Temperature Compensation
• Advanced Signal Processing
• RFI Immunity up to 2.7GHz
• Optional Tamper Proof Bracket
Patent Pending
For Double Pole Wiring
A-Zone T-Zone
Detector Setup
3
12V 0V LED
•ALARM TAMPER•
PIR Detector
†
†
†
†
WEEE Directive: 2012/19/EU Compliant: This
symbol indicates that according to local laws and
regulations, this product should not be disposed
of as municipal/household waste. Instead, it
should be disposed of at the appropriate
collection points designated for the recycling of
electrical and electronic equipment, or returned
to Orisec upon purchase of new replacement
products. This will help to conserve natural
resources and ensure that it is recycled in a
manner that protects human health and the
environment.
RoHS Directive: 2011/65/EU Compliant:
Orisec declares that this product complies with
and conforms to RoHS legislation that it does not
contain more than the agreed levels of: Lead
(Pb), Cadmium (Cd), Mercury (Hg), Hexavalent
chromium (Cr6+), Polybrominated biphenyls
(PBB), Polybrominated diphenyl ethers (PBDE)
Standards and Approvals
Specification
Warranty Regulatory
Description Passive Infrared Detector
Pyro Electric Sensor Dual Element
Range 15m
Optics Multi Height Spherical
Detection Areas 68
Mounting Height 1.8m - 3.1m
Supply Voltage 9 - 15V
DC
(12V nominal)
Quiescent Current 10mA
Alarm (LED enabled) 15mA
Alarm (LED disabled) 7mA
LED Control = 0V LED Enabled
LED Control = 12V / NC LED Disabled
Pulse Count Digital
Start-up Time 60 seconds
Alarm Time > 2 seconds
Target Speed 0.3m/s - 3.0m/s
Dimensions (whd) mm 60 x 97 x 40
Housing Material 3mm ASA
Operating Temperature -20°C to +55°C
Storage Temperature -35°C to 60°C
Maximum Humidity 95% non-condensing
Product Weight 80g
Packed Weight 95g
Maintenance Annual Installer Check
Security
PD 6662:2010
EN 50131-2-2:2008 Grade 2, Class II
EMC / False Alarm Immunity
EMC Immunity: EN 50130-4:2011
Radiated Immunity: 80MHz to 2.7GHz
Electrostatic Discharge: +/- 8kV
Conducted Immunity: 0.15MHz to 100MHz
Fast Transient Immunity: 2kV
Conducted & Radiated Emissions: EN 55022:2010
Conforms to European Union (EU) Electro-Magnetic
Compatibility (EMC) Directive 2014/30/EU and EN
50130-4:2011+A1:2014
EMC Environment: Residential / Commercial / Light
Industrial / Industrial
CE: You can view the product EC Declaration
of Conformity here: orisec.co.uk/compliance
The Orisec IR-100 is guaranteed against defects in
material or faulty workmanship for a period of 10
years from the date of purchase.
Disclaimer: Orisec will not accept any liability based
on a claim that the Orisec IR-100 failed to perform
correctly as it is a component part of an installation
and not a complete intruder alarm system.
INS001
© Copyright Orisec Ltd 2016
Certificate No. GB2005228 Registration No. 0044/1
BS EN ISO 9001 : 2015
Registered Firm
International
Accreditation Board
UK Based Technical Support:
t: +44 (0) 1706 398740
e: su[email protected]k
Designed and Manufactured
in the United Kingdom
Manufacturer:
Orisec Ltd, 1 St Crispin Way,
Haslingden, Lancashire. BB4 4PW. United Kingdom
WEEE Directive: 2012/19/EU Compliant: This
symbol indicates that according to local laws and
regulations, this product should not be disposed
of as municipal/household waste. Instead, it
should be disposed of at the appropriate
collection points designated for the recycling of
electrical and electronic equipment, or returned
to Orisec upon purchase of new replacement
products. This will help to conserve natural
resources and ensure that it is recycled in a
manner that protects human health and the
environment.
RoHS Directive: 2011/65/EU Compliant:
Orisec declares that this product complies with
and conforms to RoHS legislation that it does not
contain more than the agreed levels of: Lead
(Pb), Cadmium (Cd), Mercury (Hg), Hexavalent
chromium (Cr6+), Polybrominated biphenyls
(PBB), Polybrominated diphenyl ethers (PBDE)
Standards and Approvals
Specification
Warranty Regulatory
Description Passive Infrared Detector
Pyro Electric Sensor Dual Element
Range 15m
Optics Multi Height Spherical
Detection Areas 68
Mounting Height 1.8m - 3.1m
Supply Voltage 9 - 15V
DC
(12V nominal)
Quiescent Current 10mA
Alarm (LED enabled) 15mA
Alarm (LED disabled) 7mA
LED Control = 0V LED Enabled
LED Control = 12V / NC LED Disabled
Pulse Count Digital
Start-up Time 60 seconds
Alarm Time > 2 seconds
Target Speed 0.3m/s - 3.0m/s
Dimensions (whd) mm 60 x 97 x 40
Housing Material 3mm ASA
Operating Temperature -20°C to +55°C
Storage Temperature -35°C to 60°C
Maximum Humidity 95% non-condensing
Product Weight 80g
Packed Weight 95g
Maintenance Annual Installer Check
Security
PD 6662:2010
EN 50131-2-2:2008 Grade 2, Class II
EMC / False Alarm Immunity
EMC Immunity: EN 50130-4:2011
Radiated Immunity: 80MHz to 2.7GHz
Electrostatic Discharge: +/- 8kV
Conducted Immunity: 0.15MHz to 100MHz
Fast Transient Immunity: 2kV
Conducted & Radiated Emissions: EN 55022:2010
Conforms to European Union (EU) Electro-Magnetic
Compatibility (EMC) Directive 2014/30/EU and EN
50130-4:2011+A1:2014
EMC Environment: Residential / Commercial / Light
Industrial / Industrial
CE: You can view the product EC Declaration
of Conformity here: orisec.co.uk/compliance
The Orisec IR-100 is guaranteed against defects in
material or faulty workmanship for a period of 10
years from the date of purchase.
Disclaimer: Orisec will not accept any liability based
on a claim that the Orisec IR-100 failed to perform
correctly as it is a component part of an installation
and not a complete intruder alarm system.
INS001
© Copyright Orisec Ltd 2016
Certificate No. GB2005228 Registration No. 0044/1
BS EN ISO 9001 : 2015
Registered Firm
International
Accreditation Board
UK Based Technical Support:
t: +44 (0) 1706 398740
e: su[email protected]k
Designed and Manufactured
in the United Kingdom
Manufacturer:
Orisec Ltd, 1 St Crispin Way,
Haslingden, Lancashire. BB4 4PW. United Kingdom
WEEE Directive: 2012/19/EU Compliant: This
symbol indicates that according to local laws and
regulations, this product should not be disposed
of as municipal/household waste. Instead, it
should be disposed of at the appropriate
collection points designated for the recycling of
electrical and electronic equipment, or returned
to Orisec upon purchase of new replacement
products. This will help to conserve natural
resources and ensure that it is recycled in a
manner that protects human health and the
environment.
RoHS Directive: 2011/65/EU Compliant:
Orisec declares that this product complies with
and conforms to RoHS legislation that it does not
contain more than the agreed levels of: Lead
(Pb), Cadmium (Cd), Mercury (Hg), Hexavalent
chromium (Cr6+), Polybrominated biphenyls
(PBB), Polybrominated diphenyl ethers (PBDE)
Standards and Approvals
Specification
Warranty Regulatory
Description Passive Infrared Detector
Pyro Electric Sensor Dual Element
Range 15m
Optics Multi Height Spherical
Detection Areas 68
Mounting Height 1.8m - 3.1m
Supply Voltage 9 - 15V
DC
(12V nominal)
Quiescent Current 10mA
Alarm (LED enabled) 15mA
Alarm (LED disabled) 7mA
LED Control = 0V LED Enabled
LED Control = 12V / NC LED Disabled
Pulse Count Digital
Start-up Time 60 seconds
Alarm Time > 2 seconds
Target Speed 0.3m/s - 3.0m/s
Dimensions (whd) mm 60 x 97 x 40
Housing Material 3mm ASA
Operating Temperature -20°C to +55°C
Storage Temperature -35°C to 60°C
Maximum Humidity 95% non-condensing
Product Weight 80g
Packed Weight 95g
Maintenance Annual Installer Check
Security
PD 6662:2010
EN 50131-2-2:2008 Grade 2, Class II
EMC / False Alarm Immunity
EMC Immunity: EN 50130-4:2011
Radiated Immunity: 80MHz to 2.7GHz
Electrostatic Discharge: +/- 8kV
Conducted Immunity: 0.15MHz to 100MHz
Fast Transient Immunity: 2kV
Conducted & Radiated Emissions: EN 55022:2010
Conforms to European Union (EU) Electro-Magnetic
Compatibility (EMC) Directive 2014/30/EU and EN
50130-4:2011+A1:2014
EMC Environment: Residential / Commercial / Light
Industrial / Industrial
CE: You can view the product EC Declaration
of Conformity here: orisec.co.uk/compliance
The Orisec IR-100 is guaranteed against defects in
material or faulty workmanship for a period of 10
years from the date of purchase.
Disclaimer: Orisec will not accept any liability based
on a claim that the Orisec IR-100 failed to perform
correctly as it is a component part of an installation
and not a complete intruder alarm system.
INS001
© Copyright Orisec Ltd 2016
Certificate No. GB2005228 Registration No. 0044/1
BS EN ISO 9001 : 2015
Registered Firm
International
Accreditation Board
UK Based Technical Support:
t: +44 (0) 1706 398740
e: su[email protected]k
Designed and Manufactured
in the United Kingdom
Manufacturer:
Orisec Ltd, 1 St Crispin Way,
Haslingden, Lancashire. BB4 4PW. United Kingdom
WEEE Directive: 2012/19/EU Compliant: This
symbol indicates that according to local laws and
regulations, this product should not be disposed
of as municipal/household waste. Instead, it
should be disposed of at the appropriate
collection points designated for the recycling of
electrical and electronic equipment, or returned
to Orisec upon purchase of new replacement
products. This will help to conserve natural
resources and ensure that it is recycled in a
manner that protects human health and the
environment.
RoHS Directive: 2011/65/EU Compliant:
Orisec declares that this product complies with
and conforms to RoHS legislation that it does not
contain more than the agreed levels of: Lead
(Pb), Cadmium (Cd), Mercury (Hg), Hexavalent
chromium (Cr6+), Polybrominated biphenyls
(PBB), Polybrominated diphenyl ethers (PBDE)
Standards and Approvals
Specification
Warranty Regulatory
Description Passive Infrared Detector
Pyro Electric Sensor Dual Element
Range 15m
Optics Multi Height Spherical
Detection Areas 68
Mounting Height 1.8m - 3.1m
Supply Voltage 9 - 15V
DC
(12V nominal)
Quiescent Current 10mA
Alarm (LED enabled) 15mA
Alarm (LED disabled) 7mA
LED Control = 0V LED Enabled
LED Control = 12V / NC LED Disabled
Pulse Count Digital
Start-up Time 60 seconds
Alarm Time > 2 seconds
Target Speed 0.3m/s - 3.0m/s
Dimensions (whd) mm 60 x 97 x 40
Housing Material 3mm ASA
Operating Temperature -20°C to +55°C
Storage Temperature -35°C to 60°C
Maximum Humidity 95% non-condensing
Product Weight 80g
Packed Weight 95g
Maintenance Annual Installer Check
Security
PD 6662:2010
EN 50131-2-2:2008 Grade 2, Class II
EMC / False Alarm Immunity
EMC Immunity: EN 50130-4:2011
Radiated Immunity: 80MHz to 2.7GHz
Electrostatic Discharge: +/- 8kV
Conducted Immunity: 0.15MHz to 100MHz
Fast Transient Immunity: 2kV
Conducted & Radiated Emissions: EN 55022:2010
Conforms to European Union (EU) Electro-Magnetic
Compatibility (EMC) Directive 2014/30/EU and EN
50130-4:2011+A1:2014
EMC Environment: Residential / Commercial / Light
Industrial / Industrial
CE: You can view the product EC Declaration
of Conformity here: orisec.co.uk/compliance
The Orisec IR-100 is guaranteed against defects in
material or faulty workmanship for a period of 10
years from the date of purchase.
Disclaimer: Orisec will not accept any liability based
on a claim that the Orisec IR-100 failed to perform
correctly as it is a component part of an installation
and not a complete intruder alarm system.
INS001
© Copyright Orisec Ltd 2016
Certificate No. GB2005228 Registration No. 0044/1
BS EN ISO 9001 : 2015
Registered Firm
International
Accreditation Board
UK Based Technical Support:
t: +44 (0) 1706 398740
e: su[email protected]k
Designed and Manufactured
in the United Kingdom
Manufacturer:
Orisec Ltd, 1 St Crispin Way,
Haslingden, Lancashire. BB4 4PW. United Kingdom
WEEE Directive: 2012/19/EU Compliant: This
symbol indicates that according to local laws and
regulations, this product should not be disposed
of as municipal/household waste. Instead, it
should be disposed of at the appropriate
collection points designated for the recycling of
electrical and electronic equipment, or returned
to Orisec upon purchase of new replacement
products. This will help to conserve natural
resources and ensure that it is recycled in a
manner that protects human health and the
environment.
RoHS Directive: 2011/65/EU Compliant:
Orisec declares that this product complies with
and conforms to RoHS legislation that it does not
contain more than the agreed levels of: Lead
(Pb), Cadmium (Cd), Mercury (Hg), Hexavalent
chromium (Cr6+), Polybrominated biphenyls
(PBB), Polybrominated diphenyl ethers (PBDE)
Standards and Approvals
Specification
Warranty Regulatory
Description Passive Infrared Detector
Pyro Electric Sensor Dual Element
Range 15m
Optics Multi Height Spherical
Detection Areas 68
Mounting Height 1.8m - 3.1m
Supply Voltage 9 - 15V
DC
(12V nominal)
Quiescent Current 10mA
Alarm (LED enabled) 15mA
Alarm (LED disabled) 7mA
LED Control = 0V LED Enabled
LED Control = 12V / NC LED Disabled
Pulse Count Digital
Start-up Time 60 seconds
Alarm Time > 2 seconds
Target Speed 0.3m/s - 3.0m/s
Dimensions (whd) mm 60 x 97 x 40
Housing Material 3mm ASA
Operating Temperature -20°C to +55°C
Storage Temperature -35°C to 60°C
Maximum Humidity 95% non-condensing
Product Weight 80g
Packed Weight 95g
Maintenance Annual Installer Check
Security
PD 6662:2010
EN 50131-2-2:2008 Grade 2, Class II
EMC / False Alarm Immunity
EMC Immunity: EN 50130-4:2011
Radiated Immunity: 80MHz to 2.7GHz
Electrostatic Discharge: +/- 8kV
Conducted Immunity: 0.15MHz to 100MHz
Fast Transient Immunity: 2kV
Conducted & Radiated Emissions: EN 55022:2010
Conforms to European Union (EU) Electro-Magnetic
Compatibility (EMC) Directive 2014/30/EU and EN
50130-4:2011+A1:2014
EMC Environment: Residential / Commercial / Light
Industrial / Industrial
CE: You can view the product EC Declaration
of Conformity here: orisec.co.uk/compliance
The Orisec IR-100 is guaranteed against defects in
material or faulty workmanship for a period of 10
years from the date of purchase.
Disclaimer: Orisec will not accept any liability based
on a claim that the Orisec IR-100 failed to perform
correctly as it is a component part of an installation
and not a complete intruder alarm system.
INS001
© Copyright Orisec Ltd 2016
Certificate No. GB2005228 Registration No. 0044/1
BS EN ISO 9001 : 2015
Registered Firm
International
Accreditation Board
UK Based Technical Support:
t: +44 (0) 1706 398740
e: su[email protected]k
Designed and Manufactured
in the United Kingdom
Manufacturer:
Orisec Ltd, 1 St Crispin Way,
Haslingden, Lancashire. BB4 4PW. United Kingdom
Other manuals for IR-100
1
Table of contents
Other Orisec Security Sensor manuals
